Debido a un error en el proceso de plegar el airbag del conductor, el protector térmico puede no moverse completamente alrededor del inflador cuando el airbag está activado. Como resultado, el gas caliente puede entrar en contacto directo con el panel frontal del airbag, causando daños por quemaduras en el material de la bolsa. Como resultado, el airbag puede romperse durante el inflado, reduciendo su función protectora.
El muelle de retención de posición del interruptor de encendido presenta, debido a un mantenimiento inadecuado de los equipos de moldeo, algunas unidades con rayaduras producidas durante el moldeo. Por ello, al repetir la operación de la llave de encendido, dicho muelle puede romperse. Si en la llave de encendido se colocan objetos pesados, como numerosos llaveros, las vibraciones durante la conducción pueden hacer que la llave gire fuera de la posición ON, lo que podría cortar la alimentación eléctrica del vehículo y provocar la parada del motor. Además, si se produce un accidente en este estado, los airbags no se desplegarán.
In the event that the driver airbag is deployed during a frontal impact small holes may occur on the surface of the airbag. The holes are caused by high temperature gases from the airbag inflator exhausting directly onto the surface of the airbag material. The high temperature gas/airbag material may contact the drivers skin. The deployment performance of the driver airbag is not affected.
DVSA · Reino Unido25 feb 2013R/2013/019Años modelo 2012Mostrado en inglés original · traducción pendienteVer detalles →
null In the event that the driver's airbag is deployed during a frontal impact, small holes may appear on the surface of the airbag. The holes are caused by high temperature gas from the airbag inflator exhausting directly onto the surface of the airbag material. Contact of the high temperature gas / airbag material with the driver’s skin can cause burns.
Safety Gate · UE20 feb 2013A12/0243/13Años modelo 2012Mostrado en inglés original · traducción pendienteVer detalles →
En los vehículos afectados, es posible que el cinturón de seguridad delantero haya sufrido daños accidentales durante la preparación de las piezas para su montaje.
DVSA · Reino Unido7 abr 2025R/2025/118Años modelo 2024Traducido automáticamente · original: inglésVer detalles →
Due to a design change introducing an internal chamfer in the rear seat back lock button, the latch actuation rod can catch on this chamfer, preventing its upwards movement.As a result the rear seat back may not be securely latched when returned to its upright position after folding, and the occupant of the rear seat and any items stored in the luggage compartment may not be correctly restrained in the event of an accident, increasing the risk of injury.
Safety Gate · UE12 oct 2021A12/01430/21Años modelo 2019–2020Mostrado en inglés original · traducción pendienteVer detalles →
On certain vehicles, the rear seat latch strikers (which secure the seat backrest in the upright position) may have been manufactured incorrectly. As a result, the rear seat back strikers may deform during a frontal vehicle crash, which could increase the risk of injury to a rear seat occupant. Correction: Dealers will replace the rear seat latch strikers with updated versions.
Transport Canada12 jul 20122012211Años modelo 2012Mostrado en inglés original · traducción pendienteVer detalles →
Nissan is recalling certain model year 2012 juke vehicles manufactured from february 3, 2012, through may 26, 2012. Due to an incomplete weld penetration, the rear seat back striker may partially separate in a crash.
NHTSA · Estados Unidos12 jul 201212V328000Años modelo 2012Mostrado en inglés original · traducción pendienteVer detalles →
Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).