Some vehicles may exhibit an interference between the front (1) and the rear door bright window glass molding (2) due to the bright window glass molding shifting backward when opening/closing the front door. This is caused by an inappropriate position of the positioning tab on the front door glass run-channel. To eliminate this concern, double-sided tape has been added to the front door glass run-channel, and the shape of the rear end of the front door glass run-channel has been modified to prevent the bright window glass molding from shifting. Customers having this concern should have their vehicle repaired using the following repair procedure. REPAIR PROCEDURE 1. Verify the customer concern. 2. Replace the front glass run-channel(s) with a modified one(s) according to the instructions in MGSS (FRONT DOOR GLASS RUN-CHANNEL REMOVAL/INSTALLATION). NOTE: Repair only the side with the issue. ATTENTION: Removing the front beltline moldings is unnecessary for this repair procedure when replacing the front door glass run-channel. 3. Verify the repair.
NANHTSA · boletín del fabricante11030601
Boletines técnicos
Mostrado en inglés original · traducción pendiente
Afecta a: Mazda CX-90 (Años modelo 2024)
Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).