Bollettino
Coolant is leaking from the oil filter housing.
🔔 Crea un account gratuito per ricevere avvisi via e-mail su BMW E83 (tutte le generazioni)
I bollettini tecnici (TSB) sono istruzioni di riparazione che i costruttori inviano ai concessionari su problemi noti. Non sono richiami di sicurezza, ma spesso confermano un difetto.
Coolant is leaking from the oil filter housing.
Only fuel nozzles with the recommended specified diameter for diesel engine passenger vehicles can beinserted into the filler neck. Most fuel stations have their diesel fuel pumps fitted with this recommendeddiameter fuel nozzle. However, if the vehicles filler-neck misfuelling protection system has been disabled, or the incorrectdiameter fuel nozzle has been installed on the diesel fuel pump, the vehicles diesel fuel system can becontaminated by filling the diesel engine vehicle with gasoline. If the diesel fuel system has been contaminated with gasoline, follow the repair guidelines below:
Bmw: Oil separator-cold climate conditions. Certain areas of the us experience extremely cold climate conditions during the winter months. A small number of vehicles have experienced problems ranging from leaking or broken valve covers to complete engine failure. Include models e39, 46, 53, 60, 83, and e85. No model years listed. *pe
The voice command to deactivate Automatic Engine Start/Stop function can also trigger the activation ofIconic Sounds.
Auxiliary Water Pump Return
Oil Line Return
After engine warm up there is a rattling noise coming from the rear muffler. During diagnosis, the rattle goesaway if the vehicle is put on a lift.
Coolant Pump Return
The NVLD limited emission related warranty for defects in materials or workmanship has been extended to 15 years/150,000 miles as determined from the original in-service date
A coolant line running from the front of the engine could make contact with the belt tensioner pulley.
The Check Control message below appears even though the coolant level is not below minimum when theengine is cold. Check Control message (ID 166): Top up coolant.
Engine Variants Updated.
MINI engine oil part number transition and model year 2016 engine oils
TEC26 Turbo Charger Return
SERVICE ACTION: S58T ENGINE - CHECK ENGINE OIL DEFLECTOR SCREWS: The engine oil deflector screws may have been tightened to the wrong torque.
SERVICE ACTION: S58T ENGINE - CHECK ENGINE OIL DEFLECTOR SCREWS. The engine oil deflector screws may have been tightened to the wrong torque.
"N51, N52K, N52T and N55 Engine: Various Faults Stored in DME Related to VANOS and Camshaft Position. INFORMATION Part NumberDescriptionQuantity 11 36 7 583 207Adjustment unit inlet camshaft (VANOS)1 11 36 7 583 208Adjustment unit outlet camshaft (VANOS)1 Refer to ETK for additional bolts and gaskets. WARRANTY INFORMATION Covered under the terms of the BMW New Car/SAV Limited Warranty or the BMW Certified Pre-Owned Program. Specific eligible repairs may also be covered by the terms of the Federal, State or BMW Emissions Warranty. To determine if any applicable Federal, State or BMW Emissions Warranty coverage applies prior to performing repairs, please see SI B01 02 11 for ""Emissions Warranty Coverage"" and refer to the ""Glossary of Emission Coverage"" attachment for more information. The BMW Certified Pre-Owned Limited Warranty applies to BMW CPO vehicles that are still within the BMW Certified Pre-Owned Limited Warranty, but beyond Emissions Warranty coverage that applies. Labor operation code 00 00 006 is a Main labor operation. If you are using a Main labor code for another repair, use the Plus code labor operation 00 00 556 instead. Refer to KSD2 for the corresponding flat rate unit (FRU) allowance. Enter the Chassis Number, which consists of the last 7 digits of the Vehicle Identification Number (VIN). Click on the ""Search"" button, and then enter the applicable flat rate labor operation in the FR code field. Other Repairs As outlined in the Procedure section, if other eligible and covered consequential work is required, claim this work under the defect code listed above with the applicable labor operations listed in KSD2."
DME FC 1C0102 IS STORED WITH NO OTHER RELATED FAULTS: The following fault has been stored in the Digital Motor electronics (DME) fault memory with no other engine oil pressure faults stored.
SERVICE ACTION: CHECK ROUTING OF FUEL LINE: The fuel feed line is not correctly routed behind the tank ventilation line and may conflict with components of the intake system.
N20 ENGINE OIL FEED LINE TO THE TURBOCHARGER:Within the BMW model vehicles listed above, BMW of North America, LLC (BMW NA) is extending the limited warranty for the engine oil feed line to the turbocharger
Transportation film adhesive remains on the rear spoiler reinforcement after removal
ENGINE CAMSHAFT (VANOS) ADJUSTMENT UNITS: BMW of North America, LLC (BMW NA) is extending the limited warranty for the Camshaft (VANOS) Adjustment Units on certain model BMW vehicles equipped with the non-turbocharged 6-cylinder engine
Due to insufficient venting of the fuel tank, the vehicle loses power while driving and there may also difficulty refilling the tank. *ma
Bmw: Different fault codes stored for the n51, n52k, n52t, and n55 engines in the dme related to vanos and camshaft position. *kb updated 11/1/13. *pe updated 05/05/2014 *js
Bmw: Due to electrochemical reactions, on some vehicles, the heating conductors and foil connectors, the rear window defroster may fail to operate properly. *pe
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).