The cell modules in the vehicles concerned were not produced in accordance with the specifications, which may cause the module frame to fail. This may lead to a shutdown of the high-voltage system and fire.
Safety Gate · UE10 nov 2025SR/02913/25Anni modello 2021Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BMW of North America, LLC. (BMW) is recalling certain 2012-2015 X1 sDrive28i, X1 xDrive28i, 2012-2016 Z4 sDrive28i, 528i, 528i xDrive, 328i, 328xi, 2016-2018 X5 xdrive 40e, 2014-2016 228i, 228xi, 428i, 428i xDrive, 328xi Gran Turismo, 2013-2017 X3 sDrive28i, X3 xDrive28i, 2015-2018 X4 xDrive28i, 2015-2016 428xi vehicles. An improperly sealed electrical connector on the water pump may be exposed to water and short circuit.
NHTSA · Stati Uniti13 ago 202424V608000Anni modello 2012–2015Mostrato in inglese originale · traduzione in attesaVedi dettagli →
I difetti nell'avvolgimento dei fogli interni delle celle nelle batterie ad alta tensione possono causare un aumento dell'autoscarica. Ciò può portare al surriscaldamento dei moduli di celle ad alta tensione, aumentando il rischio di incendio.
Safety Gate · UE · RappelConso · Francia7 ago 2023a12/01377/22Anni modello 2019–2020Tradotto automaticamente · originale: franceseVedi dettagli →
Defects in the winding of cell-internal foils in the high-voltage batteries can lead to the occurrence of increased self-discharge. This can cause high voltage cell modules to overheat, increasing the risk of fire.
Safety Gate · UE6 ott 2022A12/01377/22Anni modello 2019–2021Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Un court-circuit dans la batterie haute tension pourrait se produire lors du chargement initial en raison d’une particule sous la forme d’une perle de soudage. cela peut déclencher une réaction en chaîne dans la batterie, ce qui augmente le risque d’incendie.
Safety Gate · UE · RappelConso · Francia26 lug 2021a12/01342/20Anni modello 2020Mostrato in francese originale · traduzione in attesaVedi dettagli →
A short circuit in the high-voltage battery could occur during initial charging due to a particle in the form of a welding bead. This may trigger a chain reaction in the battery, increasing the risk of fire.
Safety Gate · UE9 ott 2020A12/01342/20Anni modello 2020Mostrato in inglese originale · traduzione in attesaVedi dettagli →
It is possible that the connection between the B+ cable and the Power Distribution Box can become damaged by wear and heat which is caused by high current flow and high contact resistance. Normally this will result in a non-start situation after parking the vehicle. However it is possible that this could in extreme cases occur whilst the vehicle is in motion. The driver should be made aware of the issue by flickering of the instrument cluster (dash) or an engine mis-fire; but if the driver does not then the engine could cut-out without warning.
DVSA · Regno Unito10 apr 2017R/2017/114Anni modello 2009–2011Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Certain vehicles, which were parked at the port of entry in Halifax during the ice storms in February 2015, may have been exposed to excessive standing water and salt for an extended period due to this isolated environmental incident. Certain MINI models could have corrosion at the starter motor power supply cable connectors, which could lead to the inability to restart the engine following an engine shutdown by the start-stop (MSA) system, increasing the risk of crash causing injury in a traffic situation. On certain BMW models, the lubrication of some internal components within the steering rack may have been exposed to excessive water or salt which could result in higher than normal steering effort or steering binding, increasing the risk of a crash causing injury and/or damage to property. In addition, electrical wires and/or connectors in all affected vehicles may have been exposed to water or salt, which could lead to increased electrical system resistance, and increase the risk of fire causing injury and/or damage to property. Correction: Owners should contact their selling Retailer regarding this recall. Affected vehicles will be inspected. Some vehicles will be taken out of service immediately and owners will be provided with temporary transportation until a new replacement vehicle is available. All other vehicles are cleared of this safety concern and may continue to be driven until a new replacement vehicle is available. Due to potential concerns about long term vehicle quality, all affected vehicles will ultimately be removed from service.
Transport Canada30 lug 20152015343Anni modello 2015Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The connector of the positive battery cable on the front power distribution box may be damaged over the lifetime of the vehicle by vibrations and currents. This may lead to failure of the engine and of the vehicle's electrical system, including headlights and occupant protection which will increase the risk of an accident and injuries to the occupants.
Safety Gate · UE16 gen 2020A12/00039/20Anni modello 2008–2011Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Nell'unità di controllo del motore (DME), a causa di un programma non corretto, le informazioni provenienti dal sensore O2 non possono essere valutate correttamente. Di conseguenza, anche in caso di anomalie nella combustione, la spia di avaria motore potrebbe non accendersi e i gas di scarico potrebbero non rispettare i valori limite.
MLIT · Giappone24 ott 20191229350Anni modello 2015–2019Tradotto automaticamente · originale: giapponeseVedi dettagli →
The connector of the positive battery cable on the front power distribution box may be damaged. This might result in a failure of the vehicle’s electrical system and engine during driving, potentially leading to an accident.
Safety Gate · UE23 mag 2019A12/0819/19Anni modello 2009–2011Mostrato in inglese originale · traduzione in attesaVedi dettagli →
차량의 진동과 전기장치 사용에 따른 높은 부하로 인하여 B+ 케이블 접촉 단자의 주석 코팅이 마모될 수 있는 가능성에 따른 리콜
<*대상차량별 생산일자> 120d: 2009.12.23~2011.09.29 318d: 2010.05.12~2011.06.15 318d Touring: 2010.04.23~2010.10.14 320d: 2010.02.11~2010.02.11 320d: 2009.12.01~2010.03.16 320d: 2010.03.12~2011.10.10 320d ED: 2010.05.31~2011.06.17 320xd: 2010.01.28~2010.01.28 X1 xDrive18d: 2010.03.11~2011.06.17 X1 xDrive20d: 2009.12.22~2011.08.10 X1 xDrive23d: 2009.12.23~2011.04.21
MOLIT · Corea del Sud29 apr 20193085Anni modello 2009–2011Mostrato in coreano originale · traduzione in attesaVedi dettagli →
리어램프 고정 너트의 제작공정 중 불충분한 세척으로 세척되지 않은 절삭유가 고정 브라켓의 부식을 유발하여 리어램프가 주행 중 이탈될 수 있는 가능성에 따른 리콜
BMW X1 xDrive25i, B: 2018.10.19~2018.12.14
MW X1 xDrive20d: 2018.10.18~2018.10.29
BMW X1 xDrive18d: 2018.10.17
MOLIT · Corea del Sud22 feb 20193110Anni modello 2018Mostrato in coreano originale · traduzione in attesaVedi dettagli →
The nuts of the rear light brackets may be contaminated with oil. Oil can cause cracks in the light brackets and the rear lights may separate from the vehicle leading to an accident.
Safety Gate · UE21 feb 2019A12/0367/19Anni modello 2018–2019Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Issue: On certain vehicles, the brackets for the rear tail lights may crack. This could cause the tail lights to separate from the vehicle. Safety Risk: If the tail lights separate from the vehicle, others may not see the vehicle and its turn signals or brake lights. This could increase the risk of a crash. Corrective Actions: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer for an inspection of the rear tail lights. The mounting nuts will be replaced, and if necessary, dealers will replace the tail lights.
Transport Canada31 gen 20192019042Anni modello 2018–2019Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BMW of North America, LLC (BMW) is recalling certain 2018-2019 BMW X1 sDrive28i and X1 xDrive28i vehicles. Contaminated hardware may cause the attachment brackets of the taillight housings to crack, causing the lights to loosen or possibly detach from the vehicle.
NHTSA · Stati Uniti30 gen 201919V074000Anni modello 2018–2019Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The affected vehicles may be equipped with a crankshaft sensor with a software fault. The crankshaft sensor cannot process the signal values from the crankshaft transmitter due to an improper firmware level. The firmware does not compensate sufficiently the temperature gradients and the magnetic field strength of the sensor electronic. If the crankshaft sensor cannot process the signal values from the transmitter the Digital Diesel Electronic (DDE) will notice that and change to the emergency operation mode. The emergency mode will be displayed by the check control message �engine malfunction�. The driver may notice a rough running engine and a reduced driving power (70%). However an engine stalling during driving conditions cannot be excluded.
DVSA · Regno Unito20 ago 2018R/2018/211Anni modello 2018Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The plug connection for the positive battery cable may be defective. This could cause the vehicle electrics and the engine to fail while the vehicle is in motion.
Safety Gate · UE18 lug 2018A12/1019/18Anni modello 2008–2011Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).