Fuel system, gasoline:Delivery:Hoses, lines/piping, and fittings
Vehicle description: Pickup trucks with a 131 inch wheelbase. Some of these vehicles may have been built with inadequate clearance between the fuel line and the cab underbody.
🔔 Crea un account gratuito per ricevere avvisi via e-mail su Dodge Dakota (tutte le generazioni)
Vehicle description: Pickup trucks with a 131 inch wheelbase. Some of these vehicles may have been built with inadequate clearance between the fuel line and the cab underbody.
Two fuel tank support strap attaching studs were not adequately tightened, which could cause one or both of the strap(s) to separate, mislocating the fuel tanks or allow complete separation of the fuel tank from the vehicle.
An improperly routed transmission wiring harness may come in contact with the fuel hoses and cause fuel hose abrasion. This could result in fuel leakage with the potential for a vehicle fire. Correction: A tie strap will be installed to secure the transmission wiring away from the fuel hoses.
Steel braided fuel hose routing may allow contact between the hose and transmission wiring harness.
La guarnizione del coperchio delle valvole del motore può disallinearsi e consentire una perdita di olio motore in corrispondenza della guarnizione.
Su veicoli con motore EFI da 2,2 litri o 2,5 litri (non turbo), la guarnizione del coperchio punterie potrebbe perdere olio, creando il rischio di un incendio nel vano motore. Correzione: la guarnizione del coperchio punterie verrà sostituita con un coperchio modificato e sigillante RTV applicato al posto della guarnizione.
The fuel tank support strap attaching studs may not be adequately tightened. This could result in disengagement of the support strap joint which could in turn cause the fuel tank to drop down. Correction: Fuel tank support strap attaching studs will be tightened to specified torque.
Alcuni veicoli non sono conformi alla CMVSS 1105 - emissioni evaporative. Canister per le emissioni evaporative difettoso.
Speed control system cables may partially disengage and bind at the carburetor throttle lever attachment.
차동장치의 뒤쪽 피니언 너트가 피니언 너트 나사산에 접착 패치가 없는 상태로 제작되었을 수 있습니다. 이 접착 패치가 없을 경우 뒤쪽 액슬 피니언 너트가 느슨해지거나 뒤쪽 구동 샤프트가 차동장치에서 떨어져 나갈 수 있습니다. 피니언 너트가 느슨할 경우 차동장치로부터 떨어져 나간 구동 샤프트로 인해 엔진의 힘이 바퀴로 젂달되지 않을 수 있습니다. 어느 경우이든 경고 표시 없이 충돌을 유발할 수 있습니다
Note: Vehicles with 3.9 litre engine and automatic transmission. These vehicles do not comply with c.M.V.S.S. 1101 - emission device. Vehicles were built with an incorrect underhood emission information (veci) label. The labels incorrectly identify the vehicle as certified to california standards. Correction: Owners will be supplied with correct labels and installation instructions.
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).