Ford Motor Company (Ford) is recalling certain 2021-2023 Bronco vehicles built with the 5-Door body style. The first-row seat belt latch plates may be difficult to access from their stowed position. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."
NHTSA · Stati Uniti18 mag 202323V358000Anni modello 2021–2023Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Ford Motor Company (Ford) sta richiamando alcuni veicoli Bronco 2026. La staffa di montaggio dell'airbag a tendina sul lato destro potrebbe presentare una bava metallica che, durante l'attivazione, potrebbe lacerare l'airbag.
NHTSA · Stati Uniti9 set 202626V580000Anni modello 2026Tradotto automaticamente · originale: ingleseVedi dettagli →
프레임(Pivot link) 제조 업체의 공정 절차 오류로 인한 볼트 풀림 방지 접착제의 접착력 저하로 인해 해당 볼트가 느슨해질 경우 시트 쿠션에서 소음이 발생하거나 유격이 느껴질 수 있으며, 볼트가 이탈되면 충돌 시 탑승자의 부상 위험이 증가할 수 있음이 확인됨에 따른 리콜
MOLIT · Corea del Sud2 lug 20266293Anni modello 2024–2025Mostrato in coreano originale · traduzione in attesaVedi dettagli →
운전석 및/또는 조수석 시트 높이 조절 장치 프레임(Pivot link)에 볼트 장착부 규격 문제로 일부 고정 볼트가 점차 느슨해질 수 있으며, 이런 경우 시트 쿠션에서 소음이 발생하거나 유격이 느껴질 수 있고, 볼트가 이탈되면 충돌 시 탑승자의 부상 위험이 증가할 수 있음이 확인됨에 따른 리콜
MOLIT · Corea del Sud2 giu 20266251Anni modello 2022Mostrato in coreano originale · traduzione in attesaVedi dettagli →
Ford Motor Company (Ford) is recalling certain 2024-2026 Ranger and Bronco vehicles. The front seats may have a loose or dislodged seat frame height-adjust pivot bolt.
NHTSA · Stati Uniti28 apr 202626V268000Anni modello 2024–2026Mostrato in inglese originale · traduzione in attesaVedi dettagli →
공급 업체의 조립 과정에서 액티브 벤트 플랩이 장착되는 부분에 손상이 발생되었을 수 있으며, 이런 경우 에어백이 전개되는 충돌 발생 시 에어백 압력이 정상적으로 조절되지 않아 탑승자의 부상 위험이 높아질 수 있음이 확인됨에 따른 리콜 (이는 FMVSS (미국안전기준) 208번 탑승자 충돌 보호를 준수하지 못할 수 있음)
MOLIT · Corea del Sud26 gen 20266011Anni modello 2025Mostrato in coreano originale · traduzione in attesaVedi dettagli →
인포테인먼트 화면 관련 소프트웨어 오류가 있을 수 있으며, 이런 경우 인포테인먼트 화면이 정지되거나, 갑자기 시스템이 재부팅될 수 있고 어라운드 뷰(360º 카메라) 또는 후방 카메라 시스템 작동 중 이러한 현상이 발생되는 경우 주변 및/또는 후방 시야에 영향을 미쳐 충돌 위험을 증가시킬 수 있는 가능성이 확인됨에 따른 리콜
<대상차량별 생산일자> 2023~2024년식 Ranger Raptor: 2023.02.21~2023.08.23 2023년식 Ranger Wildtrak: 2023.07.18~2023.08.11 2024년식 Mustang: 2023.10.10~2023.12.13 2023년식 Nautilus: 2023.05.15~2023.08.11 2022~2024년식 Expedition: 2021.12.08~2024.05.15 2023~2024년식 Navigator: 2023.02.22~2023.08.08 2022~2024년식 Bronco: 2022.02.17~2023.12.07
MOLIT · Corea del Sud24 ott 20255896Anni modello 2021–2024Mostrato in coreano originale · traduzione in attesaVedi dettagli →
Ford Motor Company (Ford) is recalling certain 2021-2023 Bronco vehicles. The front seats may have a loose or dislodged seat frame height-adjust pivot bolt.
NHTSA · Stati Uniti23 ott 202525V721000Anni modello 2021–2023Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Ford Motor Company (Ford) is recalling certain 2025 Bronco vehicles. The active vent flap on the passenger side may prevent the air bag from deploying as intended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."
NHTSA · Stati Uniti13 giu 202525V396000Anni modello 2025Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Ford Motor Company (Ford) is recalling certain 2025 Ranger and Bronco vehicles. The bolts that secure the driver's seat frame to the body may be loose or missing. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 207, "Seating Systems."
NHTSA · Stati Uniti9 mag 202525V311000Anni modello 2025Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles. The right or left side impact sensors may not be properly secured to the vehicle.
NHTSA · Stati Uniti14 dic 202222V928000Anni modello 2021–2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Ford Motor Company (Ford) is recalling certain 2021 Bronco vehicles. During passenger air bag deployment, an air bag vent could open prematurely and result in an improper deployment. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."
NHTSA · Stati Uniti1 ott 202121V770000Anni modello 2021Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The bolts that attach the d-shaped ring for the shoulder belt are inadequately supported by the material in which they are mounted. The attachment does not comply with the requirements of federal motor vehicle safety standard no. 210, "seat belt assembly anchorages".
NHTSA · Stati Uniti20 dic 198383V134000Anni modello 1984Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The upper torso restraint d-ring which attaches the shoulder belt to the b pillar, under certain test conditions, separated from its anchorage, and may not comply with cmvss 210 - belt anchorage.
Transport Canada17 dic 19831983114Anni modello 1984Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The manufacturer suspects that the hardware that attaches the seat tracks (the strips that the seat slides on) to the floor may become loose or may fail to hold the seat in place during a collision. This condition is due to the substitution of an incorrect washer during manufacture. The vehicles may not comply with the strength requirements of federal motor vehicle safety standard 207, "seating systems".
NHTSA · Stati Uniti24 feb 198383V020000Anni modello 1983Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).