Lettura libera · account gratuito per contribuireErede di Anticars (2000)

Ford Probe

1988–1997 · 2 generazioni · 24 difetti documentati · 1 mercati
Generazioni
Anno modello
MercatoTuttiJPNA
Probe II (1993) · 1992–1997
RichiamoCriticoAbitacoloNA

Seats And Restraints

The passenger side supplemental restraint system (air bag) may have a cracked inflator body. If the vehicle is involved in a deployment level crash, the passenger side air bag may not inflate properly which could result in reduced occupant protection. In addition, the igniter plug could separate from the inflator, which could result in the release of hot gases and could ignite flammable material or potentially cause personal injury. Correction: Vehicles will be inspected and a new passenger side air bag module will be installed if necessary.

Transport Canada21 feb 19951995032Anni modello 1995Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Probe I (1989) · 1988–1992
RichiamoCriticoAbitacoloNA

Seat belts:Front:Anchorage

Brackets mounting automatic shoulder belt retractor assembly may have an understrength spot weld.

NHTSA · Stati Uniti1 gen 199191V016000Anni modello 1991Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Probe I (1989) · 1988–1992
RichiamoModeratoAbitacoloNA

Sedili e sistemi di ritenuta

Il binario del gruppo di scorrimento motorizzato della cintura di sicurezza può usurarsi in misura sufficiente, in determinate condizioni, da far sì che il cavo che spinge e tira il gruppo fibbia mobile si inceppi nel binario, rendendo il gruppo di scorrimento della cintura di sicurezza inoperativo. Correzione: i binari motorizzati della cintura a tracolla lato guidatore saranno sostituiti con binari di maggiore durata. I binari delle cinture lato passeggero saranno ispezionati e/o sostituiti se necessario.

Transport Canada30 set 19961996153Anni modello 1990–1992Tradotto automaticamente · originale: ingleseVedi dettagli →
Probe I (1989) · 1988–1992
RichiamoModeratoAbitacoloNA

Seat belts:Front:Webbing

Note: Driver's side (left) passive seat belt assembly. The rail of the automatic shoulder belt can wear sufficiently such that the cable which retracts the buckle assembly will become jammed in the rail rendering the shoulder belt inoperative.

NHTSA · Stati Uniti6 set 199696V172001Anni modello 1990–1992Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Probe I (1989) · 1988–1992
RichiamoModeratoAbitacoloNA

Seat belts:Front:Webbing

Note: Passenger side (right) seat belt assembly. The rail of the automatic shoulder belt can wear sufficiently such that the cable which retracts the buckle assembly will become jammed in the rail rendering the shoulder belt inoperative.

NHTSA · Stati Uniti6 set 199696V172002Anni modello 1990–1992Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Probe II (1993) · 1992–1997
RichiamoModeratoAbitacoloNA

Seats And Restraints

These vehicles do not comply with c.M.V.S.S. 210.1 tether anchorages for child restraints. The english tether bolt and metric anchor nut combination is not compatible with the standard. Also, information concerning the installation of the bolt contained in the owner guide is incorrect. Correction: New child restraint anchor bolt kits will be mailed to owners along with two revised stick-on owner guide pages. Also, dealers will replace incorrect panel weld nut if required.

Transport Canada22 mar 19941994060Anni modello 1993Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Probe II (1993) · 1992–1997
RichiamoModeratoAbitacoloNA

Air bags:Frontal

If the passenger-side air bag deploys in an accident and there is no passenger in that seating position, the air bag can detach from, and deform, the mounting bracket.

NHTSA · Stati Uniti15 ott 199393V169000Anni modello 1994Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Probe I (1989) · 1988–1992
RichiamoModeratoAbitacoloNA

Seats And Restraints

The brackets to which the automatic shoulder belt retractor assembly is mounted under the centre console may have understrength spot welds that might reduce the effectiveness of the shoulder belt in the event of a vehicle collision. Correction: Dealers will install two bolts to secure the brackets on affected vehicles.

Transport Canada12 mar 19911991040Anni modello 1991Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Probe II (1993) · 1992–1997
RichiamoLieveAbitacoloNA

Air bags

The supplementary air bag inflatable restraint caution label located on the driver side sun visor does not contain the statement, "do not install rearward facing child seats in any front passenger seat position." this does not comply with the requirements of fmvss no. 208, "occupant crash protection."

NHTSA · Stati Uniti3 giu 199696V090000Anni modello 1996Mostrato in inglese originale · traduzione in attesaVedi dettagli →

Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).