Bollettino
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the airbag lamp illuminated on the driver?s information center (DIC).
🔔 Crea un account gratuito per ricevere avvisi via e-mail su GMC Yukon (tutte le generazioni)
I bollettini tecnici (TSB) sono istruzioni di riparazione che i costruttori inviano ai concessionari su problemi noti. Non sono richiami di sicurezza, ma spesso confermano un difetto.
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the airbag lamp illuminated on the driver?s information center (DIC).
Customer Satisfaction Program. In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
Customer Satisfaction Program (Revised Correction, Service Procedure and Warranty Information). In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
Customer Satisfaction Program (VINS re-opened, software updated). In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
Customer Satisfaction Program (Revised Service Procedure and Part Ordering Information). In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
Customer Satisfaction Program (Revised Service Procedure and Part Ordering Information). In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
Programma di soddisfazione del cliente. In alcuni veicoli, il movimento del conducente può interrompere il collegamento elettrico con il sistema airbag laterale interno montato sul sedile. Questo sistema airbag è supplementare e non è un equipaggiamento obbligatorio ai sensi dei Federal Motor Vehicle Safety Standards applicabili. Se ciò si verifica, il centro informazioni del conducente del veicolo visualizzerà per il conducente il messaggio "Service Restraints System" prima che la resistenza nel collegamento impedisca la attivazione dell'airbag. I concessionari devono verificare la presenza del DTC B14DC e sostituire, se necessario, il gruppo connettore del cablaggio del sedile lato interno del conducente interessato.
## Programma di soddisfazione del cliente (Correzione rivista, procedura di assistenza e informazioni sulla garanzia) In alcuni veicoli, i movimenti del conducente possono interrompere il collegamento elettrico con il sistema airbag interno montato sul sedile. Questo sistema airbag è supplementare e non costituisce un equipaggiamento obbligatorio ai sensi delle applicabili Federal Motor Vehicle Safety Standards. Se ciò si verifica, il centro informazioni del conducente del veicolo visualizzerà per il conducente il messaggio "Service Restraints System" prima che la resistenza nel collegamento impedisca l'attivazione dell'airbag. I concessionari devono verificare la presenza del DTC B14DC e sostituire, se necessario, il gruppo connettore del cablaggio del sedile lato interno del conducente interessato.
Customer Satisfaction Program. In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
Customer Satisfaction Program (Revised Correction, Service Procedure and Warranty Information). In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
Customer Satisfaction Program (Revised Service Procedure and Part Ordering Information). In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the airbag lamp illuminated on the driver?s information center (DIC).
## Programma di soddisfazione del cliente (Correzione rivista, procedura di assistenza e informazioni sulla garanzia) In alcuni veicoli, i movimenti del conducente possono interrompere il collegamento elettrico con il sistema airbag laterale interno montato sul sedile. Questo sistema airbag è supplementare e non è un equipaggiamento obbligatorio ai sensi dei Federal Motor Vehicle Safety Standards applicabili. Se questo accade, il centro informazioni del veicolo mostrerà al conducente il messaggio "Service Restraints System" prima che la resistenza nel collegamento impedisca l'attivazione dell'airbag. I concessionari devono verificare la presenza del DTC B14DC e sostituire, se necessario, il gruppo connettore del cablaggio del sedile lato interno del conducente interessato.
Customer Satisfaction Program (Revised Service Procedure and Part Ordering Information). In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
Customer Satisfaction Program. In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the airbag lamp illuminated on the driver?s information center (DIC).
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the airbag lamp illuminated on the driver?s information center (DIC).
This Preliminary Information communication provides information to the technician about vehicle that may have a front driver's or passenger's seat back may lean or be turned outward. Technician will need to remove the seat bottom trim cover and reinstall it completely and squarely to the cushion to correct the concern.
This informational bulletin provides an upate for Cause information on Airbag Warning Lamp Illumination Condition.
This Preliminary Information communication advises the technician that some vehicles the haptic seat motors can be felt in the seat. Technician will access both haptic seat motors and rotate the motors flat, and then reinstall them back into the seat cushion. This will help improve the comfort of the seat cushion.
This Preliminary Information communication provides information to the technician for a water leak in in the second row seating area. Inspect the C-pillar area of the affected side of the vehicle for water intrusion or water marks on the seat belt retractor. If water evidence is found on the seat belt webbing or the retractor the seat belt/ retractor must be replaced after the water leak has been corrected and verified. There are 3 areas of seam sealer that will need to be addressed. After gaining access to the C-pillar and rear quarter panel area inspect for voids or missing seam sealer and apply a clear flow able seam sealer where needed.
This preliminary information communication advises the technician that some vehicles the haptic seat motors can be felt in the seat. Technician will access both haptic seat motors and rotate the motors flat, and then reinstall them back into the seat cushion. This will help improve the comfort of the seat cushion.
Roof Carrier Retaining Nut Interaction with Roof Rail Airbag
Roof Carrier Retaining Nut Interaction with Roof Rail Airbag
Third row seats hard to install (retorque latch bolts or replace seat roller bar). *nj
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).