エアーバッグ
運転席エアバッグにおいて、モジュールカバーのブランドエンブレムの材質が不適切なため、加水分解により劣化することがある。そのため、エアバッグ展開時に破損して飛散し、乗員が負傷するおそれがある。
🔔 Crea un account gratuito per ricevere avvisi via e-mail su Mazda 3 (tutte le generazioni)
運転席エアバッグにおいて、モジュールカバーのブランドエンブレムの材質が不適切なため、加水分解により劣化することがある。そのため、エアバッグ展開時に破損して飛散し、乗員が負傷するおそれがある。
The airbag and seat belt minder indicator unit may display incorrect information
エアバッグの作動を制御するコントロール・ユニットの基板回路の半田部に微細な亀裂が 発生しているものがあるため、走行中の振動等により半田部の亀裂が進行して、回路が導 通不良となることがある。そのため、半田部の亀裂箇所によっては、警告灯が点灯せず、 衝突時にエアバッグが作動しないおそれがある。また、フェールセーフ機能がはたらいて 警告灯が点灯するとともに、エアバッグが作動しなくなるおそれがある。
On two passenger vehicles, a crack in the solder connection attaching the acceleration sensor in the sas unit made contact with the base plate, damaging the solder connection.
On certain passenger vehicles, a crack in the air bag crash zone sensor housing can allow water to enter the sensor, causing a short circuit and illuminating the air bag warning light.
Mazda North American Operations is recalling certain 2024-2025 Mazda3 and CX30 vehicles. The Sophisticated Air Bag Sensor (SAS) units may set an error code and deactivate the air bags, due to a low battery condition.
Le logo en plastique sur le couvercle du module de coussin gonflable du volant peut devenir fragile au fil du temps. de ce fait, le logo peut se briser lors d’un déploiement normal d’un sac gonflable et des fragments de plastique peuvent frapper les occupants et causer des blessures graves.
Il logo in plastica sulla copertura del modulo airbag lato guidatore può diventare fragile col tempo
Mazda North American Operations (Mazda) is recalling certain 2004-2007 Mazda3 vehicles. During air bag deployment, the plastic emblem on the steering wheel air bag module cover may shatter, and project plastic fragments into the vehicle.
De airbagindicatormonitor werkt mogelijk niet correct.
Mazda North American Operations (Mazda) is recalling certain 2019 Mazda3 vehicles. The seat cover material on both front seats may interfere with the head restraint lock release button, causing it to stick in the release position and not allow the head restraint to lock into place.
La staffa di fissaggio tra il sedile del conducente e la regolazione in altezza è realizzata in modo debole. Di conseguenza può rompersi. In seguito a ciò, il sedile si stacca parzialmente e può ribaltarsi all'indietro.
教習車の助手席において、座席高さを調整するリフタリンクの強度が不足しているほか、リフタリンクの抜け止め防止用プッシュナットの固定方法が不適切なため、リフタリンクに亀裂が入る、または、プッシュナットが外れることがある。そのため、そのまま使用を続けると、座席から異音やガタが発生し、最悪の場合、リフタリンクが破損もしくは外れて座席が傾き、正しい姿勢が取れなくなるおそれがある。
運転者席において、座席高さを調整するリフタリンクの強度が不足しているほか、リフタリンクの抜け止め防止用プッシュナットの固定方法が不適切なため、リフタリンクに亀裂が入る、または、プッシュナットが外れることがある。そのため、そのまま使用を続けると、座席から異音やガタが発生し、最悪の場合、リフタリンクが破損もしくは外れて座席が傾き、正しい運転姿勢が取れなくなるおそれがある。
Mazda North American Operations (Mazda) sta richiamando alcuni veicoli Mazda2 del 2011 e Mazda3 e Mazdaspeed3 del 2010-2011 dotati di regolatore manuale dell'altezza del sedile. Nei veicoli interessati, i collegamenti del regolatore di altezza del sedile possono rompersi o staccarsi dal telaio del sedile, e l'inclinazione del sedile può cambiare, impedendo al conducente di mantenere una posizione di guida appropriata.
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).