Lettura libera · account gratuito per contribuireErede di Anticars (2000)

Mazda MX-30

2020– · 1 generazioni · 1 difetti documentati · 4 mercati
Generazioni
Tutte le generazioniMX-302020–19123

I bollettini tecnici (TSB) sono istruzioni di riparazione che i costruttori inviano ai concessionari su problemi noti. Non sono richiami di sicurezza, ma spesso confermano un difetto.

Anno modello
BollettinoModeratoAltroNA

Bollettino

Some customers may complain that Mazda Connect does not start (blank screen) or that it takes a long time to restart/ reboot after starting the vehicle. This is caused by the initialization process with the CMU failing at startup due to a defective circuit board element. To eliminate this concern, the internal hardware (DRAM) of the CMU has been improved.

NHTSA · bollettino del costruttore10237206Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoModeratoAltroNA

Bollettino

Alcuni clienti potrebbero lamentare che Mazda Connect non si avvia (schermo nero) oppure che impiega molto tempo per riavviarsi dopo l'accensione del veicolo. Ciò è causato dal fallimento del processo di inizializzazione della CMU all'avvio, dovuto a un componente difettoso sulla scheda elettronica. Per eliminare questo problema, l'hardware interno (DRAM) della CMU è stato migliorato.

NHTSA · bollettino del costruttore10233569Anni modello 2022Tradotto automaticamente · originale: ingleseVedi dettagli →
BollettinoModeratoAltroNA

Bollettino

Some customers may complain that Mazda Connect does not start (blank screen) or that it takes a long time to restart/ reboot after starting the vehicle. This is caused by the initialization process with the CMU failing at startup due to a defective circuit board element. To eliminate this concern, the internal hardware (DRAM) of the CMU has been improved.

NHTSA · bollettino del costruttore10226898Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoModeratoAltroNA

Bollettino

Some customers may complain that Mazda Connect does not start or that it takes a long time to restart after starting the vehicle. This is caused by the initialization process with the CMU failing at startup due to a defective circuit board element. To eliminate this concern, the internal hardware of the CMU has been improved.

NHTSA · bollettino del costruttore10218768Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveAltroNA

Bollettino

When encountering a vehicle with paint damage, refer to the "Mazda Paint Warranty Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).

NHTSA · bollettino del costruttore10252504Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveAltroNA

Bollettino

Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.

NHTSA · bollettino del costruttore10251387Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveAltroNA

Bollettino

When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated.

NHTSA · bollettino del costruttore10235700Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveAltroNA

Bollettino

In-Vehicle Network Malfunction error message. DTC U3000:04 (Telematics communication unit internal malfunction) stored. NOTE: The vehicle does not apply to 09-001/23 because CSP04 is not "OPEN".

NHTSA · bollettino del costruttore10235699Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveAltroNA

Bollettino

Some customers may report an odor or water in the HVAC system and upon inspection, the cabin air filter may be found to be wet.

NHTSA · bollettino del costruttore10233704Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveAltroNA

Bollettino

Mazda Connect Services - Frequently Asked Questions (FAQ)

NHTSA · bollettino del costruttore10233674Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveAltroNA

Bollettino

Due to the supply chain shortages for BDGF-66-5G0G, hardware has been confirmed compatible between BDGF-66-5G0B up to the G suffix. This can be used for repair with vehicles originally equipped with C to G level suffix parts.

NHTSA · bollettino del costruttore10230866Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveAltroNA

Bollettino

Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.

NHTSA · bollettino del costruttore10228650Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveAltroNA

Bollettino

Some customers may complain that the HVAC system's touch panel switches settings on it's own. When you receive a customer complaint regarding this concern, explain the following characteristics of the touch panel to the customer. The MX-30 heater control unit uses a capacitive touch screen which may determine that a switch has been pressed because of the close proximity of a hand, even though it has not been touched directly. No repair is necessary unless you confirm abnormal operation different from the description. NOTE: The heater control units operation confirmation sound does not sound if there is another warning or confirmation sound of another system at the same time. Since the confirmation sound of the heater control unit is missing in this special case, some customers may feel that the heater control settings have switched by themselves.

NHTSA · bollettino del costruttore10226922Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveAltroNA

Bollettino

Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.

NHTSA · bollettino del costruttore10225720Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveAltroNA

Bollettino

Mazda Connected Services Frequently Asked Questions (FAQs)

NHTSA · bollettino del costruttore10225730Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveAltroNA

Bollettino

Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.

NHTSA · bollettino del costruttore10222553Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveAltroNA

Bollettino

Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.

NHTSA · bollettino del costruttore10219229Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveAltroNA

Bollettino

Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.

NHTSA · bollettino del costruttore10215015Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveAltroNA

Bollettino

Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.

NHTSA · bollettino del costruttore10213125Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveAltroNA

Bollettino

Mazda Connected Services Frequently Asked Questions (FAQs)

NHTSA · bollettino del costruttore10213140Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveAltroNA

Bollettino

When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated.

NHTSA · bollettino del costruttore10213148Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveAltroNA

Bollettino

Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.

NHTSA · bollettino del costruttore10210844Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveAltroNA

Bollettino

There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method

NHTSA · bollettino del costruttore10210847Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveAltroNA

Bollettino

If both auxiliary keys are lost, the key cutting machines cannot cut new replacement keys using the vehicle key code.

NHTSA · bollettino del costruttore10210846Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveAltroNA

Bollettino

Mazda Connected Services Frequently Asked Questions (FAQ).

NHTSA · bollettino del costruttore10210879Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Meno recenti →

Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).