Lettura libera · account gratuito per contribuireErede di Anticars (2000)

MercuryMercury Lynx

1980–2003 · 4 generazioni · 14 difetti documentati · 2 mercati
Generazioni
Anno modello
MercatoTuttiNA
Lynx I · 1980–1990
RichiamoModeratoAbitacoloNA

Sedili e sistemi di ritenuta

The forward outboard pedestal of the seat track of the driver's seat may be susceptible to fatigue fracture. Fracture of this pedestal would permit a limited degree of rocking motion of the driver's seat assembly upon acceleration or deceleration. Breakage of the bracket could, potentially, affect the driver's control of the vehicle and result in an accident. Correction: A reinforcement will be installed on the seat track or the seat track will be replaced if fractured.

Transport Canada6 nov 19891989155Anni modello 1985–1987Tradotto automaticamente · originale: ingleseVedi dettagli →
Lynx I · 1980–1990
RichiamoModeratoAbitacoloNA

Sedili

Il piedistallo anteriore esterno della guida del sedile conducente può essere soggetto a rottura per fatica.

NHTSA · Stati Uniti13 ott 198989V170000Anni modello 1985–1987Tradotto automaticamente · originale: ingleseVedi dettagli →
Lynx I · 1980–1990
RichiamoModeratoAbitacoloNA

Seats And Restraints

The forward screw which provides part of the attachment between the driver`s seat back assembly and the seat cushion frame could fracture and permit the driver's seat back to pivot rearward. Such a condition could adversely affect the driver's ability to control the vehicle and could result in a vehicle crash. Correction: New driver's seat cushion attachment screws will be installed on affected vehicles.

Transport Canada17 mag 19881988066Anni modello 1983–1984Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Lynx I · 1980–1990
RichiamoModeratoAbitacoloNA

Richiamo

The rear seat belt retractors may allow twisted webbing to enter the retractor housing. Twisted webbing may wedge between the retractor spool and housing producing a jammed retractor condition which interfered with webbing retraction and withdrawal.

Transport Canada14 giu 19851985074Anni modello 1982–1983Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Lynx I · 1980–1990
RichiamoModeratoAbitacoloNA

Seat belts:Rear/other

Rear seat belt retractors may allow twisted webbing to enter the retractor housing and jam the retractor. Consequence of defect: A jammed retractor would interfere with webbing retraction and withdrawal. This will discourage seat belt usage.

NHTSA · Stati Uniti21 mag 198585V067000Anni modello 1982–1983Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Lynx I · 1980–1990
RichiamoModeratoAbitacoloNA

Richiamo

On vehicles with optional front seat recliners, the upper shoulder screw that attaches the driver's seat back frame to the recliner mechanism may be susceptible to fatigue fracture. If fatigue fracture of the recliner upper attachment screw were to occur on the driver's seat, the seat back could rotate rearward to a near horizontal position without warning potentially affecting the driver's control of the vehicle.

Transport Canada19 lug 19841984087Anni modello 1981Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Lynx I · 1980–1990
RichiamoModeratoAbitacoloNA

Seats

Screw that connects the seat back frame to the recliner mechanism may break.

NHTSA · Stati Uniti18 lug 198484V085000Anni modello 1981Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Lynx I · 1980–1990
RichiamoModeratoAbitacoloNA

Richiamo

When severely loaded by a frontal impact, the seat belt webbing may contact the leading edge of the front seat-back stell reinforcement plates. This may cause the seat belt webbing to be abraded, cut or completely severed, thereby significantly increasing the risk of serious personal injuries.

Transport Canada19 giu 19841984078Anni modello 1981–1983Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Lynx I · 1980–1990
RichiamoModeratoAbitacoloNA

Seats

Seat frame structure could sever front seat belts if vehicle is involved in an accident, depending on force of impact.

NHTSA · Stati Uniti15 giu 198484V071000Anni modello 1981–1983Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Lynx I · 1980–1990
RichiamoModeratoAbitacoloNA

Seat belts:Front:Anchorage

The bolts that attach the d-shaped ring for the shoulder belt are inadequately supported by the material in which they are mounted. The attachment does not comply with the requirements of federal motor vehicle safety standard no. 210, "seat belt assembly anchorages".

NHTSA · Stati Uniti20 dic 198383V134000Anni modello 1984Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Lynx I · 1980–1990
RichiamoModeratoAbitacoloNA

Richiamo

The upper torso restraint d-ring which attaches the shoulder belt to the b pillar, under certain test conditions, separated from its anchorage, and may not comply with cmvss 210 - belt anchorage.

Transport Canada17 dic 19831983114Anni modello 1984Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Lynx I · 1980–1990
RichiamoModeratoAbitacoloNA

Seat belts

The portion of the roof above frame (rail) to which the shoulder belt is anchored may have a slot that can compromise the strength of the shoulder belt anchor under certain severe loads. (the suspect area is not visible.) consequently, some vehicles included in this recall may not meet the 3000 pound anchorage strength requirements of federal motor vehicle safety standard 210, "seat belt assembly anchorages".

NHTSA · Stati Uniti17 feb 198383V013000Anni modello 1981–1982Mostrato in inglese originale · traduzione in attesaVedi dettagli →

Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).