Lettura libera · account gratuito per contribuireErede di Anticars (2000)

Mitsubishi Lancer Evolution

1992–2016 · 11 generazioni · 9 difetti documentati · 3 mercati
Generazioni
Anno modello
Lancer Evolution VIII · 2003–2005Lancer Evolution Evolution Wagon · 2005–2006
Lancer Evolution X · 2007–2016
RichiamoCriticoAbitacoloNA

Airbag

On certain vehicles operated in areas of heavy road salt usage, a mixture of snow, water and road-salt solution may infiltrate between the front impact sensor and the bracket that attaches it to the vehicle. Over time, repeated freezing/thawing cycles could cause a crack to develop in the sensor case allowing water intrusion and short circuit of the sensor. In the event of a crash, this could result in delayed deployment of the driver and passenger front airbags which would increase the risk of injury. Correction: Dealers will inspect the front impact sensor and replace it if it is found to be cracked. An updated designed bracket and cover will also be installed.

Transport Canada29 lug 20162016382Anni modello 2008–2015Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Lancer Evolution Evolution Wagon · 2005–2006Lancer Evolution IX · 2005–2007
RichiamoCriticoAbitacoloNA

Air bags:Frontal:Passenger side:Inflator module

Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2006-2007 Lancer and Lancer Evolution vehicles manufactured June 29, 2005, to June 19, 2007, equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating air bag deployment, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

NHTSA · Stati Uniti23 mag 201616V334000Anni modello 2006–2007Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Lancer Evolution X · 2007–2016
RichiamoCriticoAbitacoloNA

Airbag

On certain vehicles operated in areas of heavy road salt usage, the front impact sensors may corrode between the sensor bushing and sensor bracket. Over time, the corrosion may cause a crack to develop in the sensor case allowing water intrusion and short circuit of the sensor. This could result in delayed deployment of the driver and passenger front airbags during a vehicle crash, increasing the risk of personal injuries or death. Correction: Dealers will replace the front impact sensors.

Transport Canada9 nov 20092009317Anni modello 2008–2009Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Lancer Evolution X · 2007–2016
RichiamoCriticoAbitacoloNA

Air bags:Frontal:Sensor/control module-inactive

Mitsubishi is recalling model year 2008-2009 lancer and lancer evolution vehicles originally sold in or currently registered in the states of connecticut, delaware, illinois, indiana, iowa, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, virginia, west virginia, wisconsin and district of columbia. In areas where heavy road salt is used in the winter, a long term exposure to a mixture of melted snow with salt thrown up by the other vehicles on the road may cause a water-salt mixture to adhere to the front impact sensors.

NHTSA · Stati Uniti5 nov 200909V435000Anni modello 2008–2009Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Lancer Evolution VIII · 2003–2005Lancer Evolution Evolution Wagon · 2005–2006
Lancer Evolution Evolution Wagon · 2005–2006Lancer Evolution IX · 2005–2007Lancer Evolution X · 2007–2016
RichiamoModeratoAbitacoloJP

(ファン)ベルト

エンジンの補機駆動用ベルトの材質が不適切なため、樹脂製プーリが傾斜状に摩耗するものがある。そのため、そのまま使用を続けると当該ベルトが損傷して外れ、警告灯が点灯するとともに、バッテリ上がりまたはオーバーヒートに至るおそれがある。また、油圧パワーステアリング車においては、操舵力が増大するおそれがある。

MLIT · Giappone11 set 20141134211Anni modello 2005–2011Mostrato in giapponese originale · traduzione in attesaVedi dettagli →
Lancer Evolution X · 2007–2016
RichiamoModeratoAbitacoloJP

シートベルト

前席用座席ベルトのバックルにおいて、バックルの組立工程が不適切なため、バックル内部構成部品が折損しているものがある。そのため、当該折損破片がバックル内部に噛み込むと、ベルトを装着できなくなるおそれがある。

MLIT · Giappone30 giu 20101125640Anni modello 2010Mostrato in giapponese originale · traduzione in attesaVedi dettagli →

Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).