Lettura libera · account gratuito per contribuireErede di Anticars (2000)
AccediCrea un account
NANHTSA · bollettino del costruttore11008712

Bollettini tecnici

Mostrato in inglese originale · traduzione in attesa

Complaint Check engine light on. One of the below fault codes is current in the engine control module (N3/10). P04DB29, P04DB31, P04DB79 Cause Open circuit or high resistance to crankcase vent line contact Remedy 1. Check the electrical connector for the relevant vent line contact switch noted below. Refer to attached photos of connection locations. 2. Ensure the bolted connection is secure and bolt can be torqued (9Nm). 3. Check continuity from vent line connection to ME control unit. Repair wire if damage is found. The circuit from ME provides 5V and is pulled to 0V when the ground connection is intact. M260 P04DB31- S88/15 P04DB79- S88/16 M264 P04DB31- S88/15 P04DB79- S88/16 P04DB29- S88/17 M270/M274 P04DB79- S88/5 Note: This repair is not warrantable if the connection was left loose during previous repair/maintenance.

Riguarda: Mercedes-Benz A-Class III (Anni modello 2018) · Mercedes-Benz C-Class W205 (Anni modello 2018–2020) · Mercedes-Benz CLA-Class I (Anni modello 2019) · Mercedes-Benz E-Class V213 (Anni modello 2021) · Mercedes-Benz GLC I (Anni modello 2019) · Mercedes-Benz GLE-Class GLE (W167/C167) (Anni modello 2020) · Mercedes-Benz SLK-Class R172 (Anni modello 2016–2017)

Avviso ufficiale ↗

Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).