Some 2025 Bronco vehicles equipped with a 7 speaker audio system (minor feature code IDBAL) may exhibit an intermittent no audio condition and/or speaker fault with diagnostic trouble codes (DTCs) B128A:01, B128A:11, B128A:12, B128A:13, B1288:11, B1288:12 and/or B1238:17 stored in the audio control module (ACM). To confirm a vehicle is built with a certain minor feature code, review the build information by clicking "Additional Information" under Vehicle ID Tab > Vehicle Information, or double-clicking the vehicle identification number (VIN) in the upper left corner on Professional Technician System (PTS). To correct this condition, disconnect the negative battery cable and wait two minutes before reconnecting. If the no audio condition is not resolved, refer to the Workshop Manual (WSM), Section 415-00 for normal diagnostics outside of this article. If the no audio condition is resolved and the DTCs remain, this concern may be due to the ACM software. Replacement of the ACM and/or speakers will not resolve this condition. Inform the customers that they can continue to drive the vehicle and engineering
NANHTSA · bollettino del costruttore11022153
Bollettini tecnici
Mostrato in inglese originale · traduzione in attesa
Riguarda: Ford Bronco VI (Anni modello 2025)
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).