Park Assist Sensor 3 and 4 Harness Swap This bulletin provides information regarding the wire harness connectors for Park Assist Sensors #3 and #4. The harnesses for these sensors are visually identical and may have been interchanged during vehicleassembly. If diagnosis indicates a concern related to Park Assist Sensors #3 or #4, or associated wiring, visually inspect the harness connections to verify correct installation before proceeding with further repair Fig. 1. If the connectors are found to be swapped, release the harnesses from the retaining clips as necessary, disconnect, and reinstall each connector to the correct sensor location. Ensure harnesses are properly secured after repositioning.
NANHTSA · bollettino del costruttore11033334
Bollettini tecnici
Mostrato in inglese originale · traduzione in attesa
Riguarda: Dodge Ram IV (2009) (Anni modello 2026)
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).