Lettura libera · account gratuito per contribuireErede di Anticars (2000)
AccediCrea un account
NANHTSA · Stati Uniti94V09400011 mag 1994

Engine and engine cooling:Cooling system

Mostrato in inglese originale · traduzione in attesa

The radiator cap pressure relief valve release pressure is set too high. This can cause the coolant to reach temperatures that exceed the thermal design limits of some components of the coolant system. Should this occur, engine coolant can leak collect on top of the engine.

Rischio: If engine coolant leaks onto the hot engine exhaust manifold from the top of the engine, an engine compartment fire can result.

Rimedio: Dealers will inspect the vehicles and if any vehicle exhibits coolant leakage or if the coolant level has dropped to the point where the coolant loss would be sufficient to trigger the coolant level warning system, components potentially subject to deterioration from overheating would be replaced. These parts include the water pump bearing housing, the water level sensor and radiator upper hose, the thermostat gasket, and all water hoses located above the engine. In addition, all vehicles in which those components are replaced would also have the cooling system and other systems that carry flammable liquids checked to make certain that engine overheating had not caused any problems in those systems. Any identified problems will be repaired. The radiator cap, filler cap, and filler cap body of all recalled vehicles will be replaced by newly designed parts.

Riguarda: Mazda RX-7 III (Anni modello 1993–1994)

Avviso ufficiale ↗

Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).