Lettura libera · account gratuito per contribuireErede di Anticars (2000)

Toyota Auris

2006–2018 · 2 generazioni · 13 difetti documentati · 6 mercati
Generazioni
Anno modello
Auris II · 2012–2018
RichiamoCriticoMotoreEU

Un pressage insuffisant des pièces de la pompe à carburant haute pression peut provoquer un mouvement du…

Un pressage insuffisant des pièces de la pompe à carburant haute pression peut provoquer un mouvement du cylindre dans la pompe à carburant à travers laquelle le piston se déplace. cela peut créer de l’usure entre le cylindre et le corps de la pompe, ce qui entraîne une pression accrue sur les vannes et/ou le siège de la soupape de mouvement à l’intérieur du corps de la pompe. cette contrainte accrue peut provoquer une fissure dans la soudure des vannes affectées, ce qui pourrait entraîner une fuite de carburant, augmentant le risque d’incendie.

Safety Gate · UE · RappelConso · Francia27 set 2024a12/02637/23Anni modello 2017–2019Mostrato in francese originale · traduzione in attesaVedi dettagli →
Auris II · 2012–2018
RichiamoCriticoMotoreEU

Insufficient pressing of parts in the high pressure fuel pump can cause movement of the cylinder in the…

Insufficient pressing of parts in the high pressure fuel pump can cause movement of the cylinder in the fuel pump through which the piston moves. This can create wear between the cylinder and the pump body, resulting in increased stress on valves and/or movement valve seat inside the pump body. This increased stress can cause a crack in the weld of the affected valves, which could lead to a fuel leak, increasing the risk of fire.

Safety Gate · UE12 dic 2023A12/02637/23Anni modello 2017–2018Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Auris II · 2012–2018
Auris II · 2012–2018
RichiamoCriticoMotoreEU

The resistance characteristics of the fuel pump components against high fuel pressure may be inadequate.As…

The resistance characteristics of the fuel pump components against high fuel pressure may be inadequate.As a result, cracks may be formed on the welded parts of the pump and a fuel leak may occur, posing a risk to the following traffic.

Safety Gate · UE23 giu 2021A12/00946/21Anni modello 2017–2018Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Auris II · 2012–2018
RichiamoCriticoMotoreEU

Due to insufficient durability, the Exhaust Gas Recirculation (EGR) cooler may develop an internal coolant…

Due to insufficient durability, the Exhaust Gas Recirculation (EGR) cooler may develop an internal coolant leak which could create smouldering deposits inside the EGR cooler and the intake manifold.This may result in localised thermal damage in the intake system, which might lead to engine power reduction and to increased risk of fire.

Safety Gate · UE30 mar 2021A12/00444/21Anni modello 2015–2018Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Auris I · 2006–2012Auris II · 2012–2018
Auris I · 2006–2012Auris II · 2012–2018
Auris I · 2006–2012Auris II · 2012–2018
RichiamoCriticoMotoreJP

エバポ抑止装置

燃料蒸発ガス排出抑制装置において、蒸発ガス通路端部(樹脂製)の強度が不足しているため、燃料による膨潤等で亀裂が発生することがある。そのため、長期間使用を続けると亀裂が貫通し、燃料が漏れて、燃料臭がするおそれがある。

MLIT · Giappone29 nov 20181143810Anni modello 2006–2017Mostrato in giapponese originale · traduzione in attesaVedi dettagli →
Auris I · 2006–2012
RichiamoCriticoMotoreUK

Fuel may leak / risk of fire

The vehicles are equipped with a fuel evaporative emission control unit (canister) assembled to the fuel tank. There is a possibility that a crack could develop on the resin channel for the emission gas flow due to an improper shape of the channel edge at that location. The crack could expand over time and eventually fuel may leak from the crack when the vehicle has a full tank. Fuel or fuel vapour in the presence of an ignition source could increase the risk of a vehicle fire

DVSA · Regno Unito22 set 2016R/2016/152Anni modello 2006–2012Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Auris I · 2006–2012
Auris II · 2012–2018
Auris I · 2006–2012Auris II · 2012–2018
RichiamoCriticoMotoreUK

Risk of fire

Oil may accumulate in the turbo charger and in certain circumstances flow into the combustion chamber. This may cause engine damage. In extreme cases oil can be ejected from the engine and if it comes in contact with an ignition source may result in a fire.

DVSA · Regno Unito7 gen 2015R/2014/160Anni modello 2008–2014Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Auris I · 2006–2012Auris II · 2012–2018
RichiamoCriticoMotoreEU

null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler

null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler. Under certain driving conditions, the oil may flow into the combustion chamber and might cause engine damage, which may increase the risk of a fire in the engine compartment due to leaked oil.

Safety Gate · UE28 nov 2014A12/1918/14Anni modello 2008–2014Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Auris I · 2006–2012Auris II · 2012–2018
RichiamoCriticoMotoreJP

その他(燃料装置)

燃料蒸発ガス排出抑制装置において、蒸発ガス通路端部(樹脂製)の強度が不足しているため、酸性物質が付着すると亀裂が発生することがある。そのため、使用過程で亀裂が進展して満タン時に燃料が漏れるおそれがある。

MLIT · Giappone15 ott 20141134500Anni modello 2006–2014Mostrato in giapponese originale · traduzione in attesaVedi dettagli →
Auris II · 2012–2018
RichiamoModeratoMotoreUK

High-Pressure Fuel Pump replacement on multiple models

For certain vehicles that were affected by a previous campaign announced in October 2023 for high-pressure fuel pump a further check is required to confirm if the correct pump is fitted.

DVSA · Regno Unito20 gen 2025R/2024/514Anni modello 2018Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Auris II · 2012–2018
Auris II · 2012–2018
Auris II · 2012–2018
Auris II · 2012–2018
Auris I · 2006–2012Auris II · 2012–2018
Auris I · 2006–2012Auris II · 2012–2018
Auris I · 2006–2012
RichiamoModeratoMotoreUK

Accelerator pedal may fail to return to idle

It has been identified that on affected vehicles condensation resulting from cold-weather use of the heater or other causes may form on the worn surface of a component within the throttle pedal assembly known as the friction device. If this occurs there is a possibility that in the worst case the accelerator pedal may return slowly or does not return to the engine idle position.

DVSA · Regno Unito6 feb 2010R/2010/010Anni modello 2006–2010Mostrato in inglese originale · traduzione in attesaVedi dettagli →

Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).