무료 열람 · 무료 계정으로 기여Anticars(2000)의 후속

Audi S8

1996–2026 · 결함 2건 · 3개 시장

기술 서비스 공지(TSB)는 제조사가 알려진 문제에 대해 딜러에게 보내는 수리 지침입니다. 안전 리콜은 아니지만 결함을 확인해 주는 경우가 많습니다.

연식
공지보통엔진NA

공지

This bulletin provides informaiton when there is a leak on the oil hole between the planetary and the transfer box.

NHTSA · 제조사 공지11034705연식 2016원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지보통엔진NA

공지

The oil filter bypass valve on certain 2013 model year Audi 4.0L vehicles may not be present or may have been incorrectly installed during production.

NHTSA · 제조사 공지10120717연식 2013원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지보통엔진NA

공지

This document contains the notice about an upcoming Service action on the oil filter bypass valve. The oil filter bypass valve may not be present or may have been incorrectly installed during production.

NHTSA · 제조사 공지10119889연식 2013원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지보통엔진NA

공지

A small amount of dry or crusted coolant is seen on the coolant pump housing. The coolant level warning is not on. A minor coolant leak is possible during the break-in phase of the coolant seal on the coolant pump. The dry coolant marks are normal.

NHTSA · 제조사 공지10124868연식 2013원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지보통엔진NA

공지

Audi service campaign: See document search button for owner letter. Under certain conditions the coolant pump may leak. *rm

NHTSA · 제조사 공지10038584연식 2009원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

This bulletin provides information when the fuel gauge does not show after filling up tank.

NHTSA · 제조사 공지11026296연식 2017원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

There may be slow coolant loss from the connections of the coolant feed pipe and coolant return pipe. High temperatures cause the coolant to become encrusted on the connection flange of the turbocharger (Figure 1).

NHTSA · 제조사 공지10216668연식 2013원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

A highly sporadic startup timing issue can cause a message "CNG inspection Due! CNG Mode not available. Please contact workshop". This is a normal condition which can be resolved by recycling the ignition and repairs are not needed.

NHTSA · 제조사 공지10214760연식 2022원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

Engine Intake & Exhaust Valve Springs

NHTSA · 제조사 공지10211918연식 2021원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

Engine Intake & Exhaust Valve Springs

NHTSA · 제조사 공지10211917연식 2021원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

A highly sporadic startup timing issue can cause a message "CNG inspection Due! CNG Mode not available. Please contact workshop". This is a normal condition which can be resolved by recycling the ignition and repairs are not needed.

NHTSA · 제조사 공지10212939연식 2022원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

Added Saga Part number for 0W40 oil: SAGA Part: G E55040S0

NHTSA · 제조사 공지10182479연식 2021원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

This bulletin contains instructions for an "oil minimum" message and low oil on the dipstick.

NHTSA · 제조사 공지10174952연식 2020원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

이 기술 공지에는 손상된 터보차저를 진단하는 방법과 TAC에 연락하는 절차에 대한 안내가 포함되어 있습니다.

NHTSA · 제조사 공지10174549연식 2017자동 번역 · 원문: 영어자세히 보기 →
공지경미엔진NA

공지

이 기술 공지는 엔진 시동이 걸리지 않거나 시동이 어려운 경우, 가속 시 비정상적인 소음이 발생하는 경우, 그리고/또는 엔진 성능이 저하되는 경우에 대한 수리 지침을 담고 있습니다. 2016년식 S8+, 2016-2017년식 A8, S7, S8, RS7 및 RS7+ 해당.

NHTSA · 제조사 공지10164214연식 2016자동 번역 · 원문: 영어자세히 보기 →
공지경미엔진NA

공지

Oil Capacity Table: Changed Oil Specs for all models

NHTSA · 제조사 공지10157225연식 2018원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

Oil Capacity Table: Changed Oil Specs for all models

NHTSA · 제조사 공지10155701연식 2018원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

Added Oil Capacity Chart at the end of the document.

NHTSA · 제조사 공지10153113연식 2018원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

Oil Capacity Table: For A3 B-Cycle 2.0 TFSI engine: Changed oil spec from 508/509** Castrol EDGE Professional 5W40 to 508/509** Castrol EDGE Professional 0W20 Long Life IV

NHTSA · 제조사 공지10133281연식 2018원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

This document contains the Audi maintenance schedule. The intervals shown in this table are based on vehicles operating under normal conditions. In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.

NHTSA · 제조사 공지10128461연식 2016원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

The MIL is on. Customer may report that the engine runs irregularly. DTCs are stored in the ECM. On the camshaft adjustment valve, the filter element can loosen. There is no consequential damage from loosened particles in the oil circuit. They are gathered by the oil filter.

NHTSA · 제조사 공지10128469연식 2013원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

This informational bulletin explains why engine oil can be discolored.

NHTSA · 제조사 공지10127736연식 2017원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

This document contains the Audi maintenance schedule. First standard maintenance service at 5,000 miles or 1 year after delivery, whichever occurs first. Standard maintenance services thereafter occur at intervals of 10,000 miles or 1 year after the last standard maintenance service, whichever occurs first. First major maintenance service at 15,000 miles or 2 years after delivery, whichever occurs first. Major maintenance services thereafter occur at intervals of 20,000 miles or 2 years after the last major maintenance service, whichever occurs first. The intervals shown in this table are based on vehicles operating under normal conditions. In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.

NHTSA · 제조사 공지10123756연식 2016원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

This document contains the Audi maintenance schedule. First standard maintenance service at 5,000 miles or 1 year after delivery, whichever occurs first. Standard maintenance services thereafter occur at intervals of 10,000 miles or 1 year after the last standard maintenance service, whichever occurs first. First major maintenance service at 15,000 miles or 2 years after delivery, whichever occurs first. Major maintenance services thereafter occur at intervals of 20,000 miles or 2 years after the last major maintenance service, whichever occurs first. The intervals shown in this table are based on vehicles operating under normal conditions. In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.

NHTSA · 제조사 공지10123755연식 2016원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

아우디 2.0L 3세대 TDI 엔진

NHTSA · 제조사 공지10242668연식 2014자동 번역 · 원문: 영어자세히 보기 →
이전 →

출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).