Vehicle description: Pickup trucks. Sound deadener material inside the steering wheel could become detached from the cover and housing. Note: The ram pickup trucks were built at the warren assembly plant ("s" in the 11th vin position) from may 16, 2000 through october 23, 2000; st. Louis north assembly plant ("j" in the 11th vin position) from may 19, 2000 through october 23, 2000; lago alberto assembly plant ("m" in the 11th vin position) from may 23, 2000 through october 23, 2000; and saltillo assembly plant ("g" in the 11th vin position) from may 23, 2000 through october 23, 2000. Important: Vehicles that have already had the proper clockspring installed, according to warranty records, have been excluded from this recall. In addition, 1997-2000 model year vehicles that have had a suspect replacement clockspring installed, according to warranty records, have been added to this recall.
NHTSA · 미국2001년 5월 8일01V153000연식 1997–2000원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Vehicle description: Certain van, wagon, pickup trucks, passenger and sport utility vehicles, fail to comply with requirements of fmvss no. 209, "seat belt assemblies." the front seat belt retractor may not comply with the requirements of the standard.
NHTSA · 미국2001년 4월 11일01V119000연식 1999원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Vehicle description: Van and wagon model passenger vehicles. If water/road salt gets on the interior floor of the vehicle in the proximity of the air bag electronic control module (aecm), the aecm can corrode. The resulting corrosion can cause the driver side air bag to deploy inadvertently.
NHTSA · 미국1999년 2월 5일99V023000연식 1995–1997원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Vehicle description: Vans and vans used for conversion. If a heavy object impacts the metal casing of the air bag electronic control module (aecm), located under the driver seat, the module could inadvertently deploy the air bags.
NHTSA · 미국1999년 1월 7일99V002000연식 1998원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
On certain Club Cab and Quad Cab vehicles, the front outer seat belt buckles may not have been properly riveted to the support strap. This could result in a seat belt assembly with reduced strength. Correction: Front outer seat belt buckles will be replaced with buckles that have been properly riveted.
캐나다 교통부1998년 6월 3일1998113연식 1998원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Certain vehicles do not comply with CMVSS 208 - Seatbelt installations. Under severe collision conditions, the passenger side seat belt may may release as the result of shattering and displacement of the latch plate cinch bar. Correction: Passenger side seat belt cinch bar will be replaced with a cinch bar made from nylon material which crushes and remains in position during loading.
캐나다 교통부1995년 1월 31일1995009연식 1994원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
These vehicles do not comply with c.M.V.S.S. 207 - anchorage of seats. Seat back latch lever could bind due to distortion of the rivet for the latch lever pivot. Correction: Seat back latch assembly will be replaced with a revised assembly.
캐나다 교통부1994년 1월 17일1994009연식 1994원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
The seat back latch lever pivot rivets are susceptible to distortion. The distorted assemblies allow the seat back release latch lever to remain in the released position which is in non-compliance with fmvss no. 207, "seating systems."
NHTSA · 미국1993년 12월 14일93V213000연식 1994원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).