무료 열람 · 무료 계정으로 기여Anticars(2000)의 후속

Ford 선더버드

1979–2005 · 4 세대 · 결함 37건 · 1개 시장
세대
심각도전체보통
연식
선더버드 · 2001–2005
리콜보통실내NA

Seats:Front assembly:Power adjust

Certain passenger vehicles equipped with power adjustable seats may have been inadequately welded.

NHTSA · 미국2004년 7월 8일04V330000연식 2004원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
선더버드 · 2001–2005
리콜보통실내NA

Seat belts:Front:Webbing

On certain passenger vehicles, the driver's side seat belt contacted the seat recliner during a 35 mph ncap full-frontal barrier impact test.

NHTSA · 미국2002년 6월 14일02V169000연식 2002원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
선더버드 (tenth generation) · 1988–1997
리콜보통실내NA

Seats And Restraints

Note: This recall supersedes recall 91066 (91s32). A cable in the tension reliever mechanism in either the safety belts provided in the kits for recall 91066 (91s32) or the factory installed front safety belt assemblies may break or bind causing a malfunction in the retractor mechanism. Should this occur, the front safety belts may not retract after full extension. In this condition, the belted occupant will not be properly restrained if the vehicle is involved in a collision. Correction: Driver and front passenger safety belt assemblies will be replaced on affected vehicles.

캐나다 교통부1992년 9월 4일1992108연식 1989원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
선더버드 (tenth generation) · 1988–1997
리콜보통실내NA

Seats And Restraints

Note: This recall superseded by recall 92-108. The front seat belts may not retract after extension due to a broken tension eliminator cable which is too long and prone to breakage. This could result in the seat occupant being inadequately restrained in the event of a collision. Correction: New front seat lap-shoulder belt assemblies that have a shorter tension eliminator cable will be installed on affected vehicles.

캐나다 교통부1991년 4월 24일1991066연식 1989원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
선더버드 (ninth generation) · 1982–1988
리콜보통실내NA

Seat belts:Front:Anchorage

The bolts that attach the d-shaped ring for the shoulder belt are inadequately supported by the material in which they are mounted. The attachment does not comply with the requirements of federal motor vehicle safety standard no. 210, "seat belt assembly anchorages".

NHTSA · 미국1983년 12월 20일83V134000연식 1984원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
선더버드 (ninth generation) · 1982–1988
리콜보통실내NA

리콜

The upper torso restraint d-ring which attaches the shoulder belt to the b pillar, under certain test conditions, separated from its anchorage, and may not comply with cmvss 210 - belt anchorage.

캐나다 교통부1983년 12월 17일1983114연식 1984원문(영어)으로 표시 중 · 번역 대기자세히 보기 →

출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).