무료 열람 · 무료 계정으로 기여Anticars(2000)의 후속

Honda Stream

2000–2014 · 2 세대 · 결함 3건 · 2개 시장
세대
연식
Stream I · 2000–2006Stream II · 2006–2014
Stream I · 2000–2006Stream II · 2006–2014
리콜심각실내JP

エアバッグ

助手席側のエアバッグのインフレータ(膨張装置)において、環境温度および湿度変化の繰り返しによりガス発生剤が劣化することがある。そのため、エアバッグ展開時にインフレ-タ内圧が異常上昇して、インフレータ容器が破損するおそれがある。

국토교통성 · 일본2019년 6월 28일1145270연식 2000–2008원문(일본어)으로 표시 중 · 번역 대기자세히 보기 →
Stream I · 2000–2006Stream II · 2006–2014
리콜심각실내JP

エアバッグ

交換修理用の運転者席側SRSエアバッグのインフレータ(膨張装置)において、環境温度および湿度変化の繰り返しによりガス発生剤が劣化することがある。そのため、エアバッグ展開時にインフレ-タ内圧が異常上昇して、インフレータ容器が破損するおそれがある。

국토교통성 · 일본2019년 6월 27일1145280연식 2002–2015원문(일본어)으로 표시 중 · 번역 대기자세히 보기 →
Stream I · 2000–2006Stream II · 2006–2014
리콜심각실내JP

エアバッグ

助手席側エアバッグのインフレータ(膨張装置)において、環境温度および湿度変化の繰り返しによりガス発生剤が劣化することがある。そのため、エアバッグ展開時にインフレータ内圧が異常上昇して、インフレータ容器が破損するおそれがある。

국토교통성 · 일본2017년 1월 19일1139720연식 2000–2012원문(일본어)으로 표시 중 · 번역 대기자세히 보기 →
Stream I · 2000–2006Stream II · 2006–2014
리콜심각실내JP

エアバッグ

特定の運転者席側SRSエアバッグのインフレータ(膨張装置)において、原因は判明していないが、エアバッグ展開時にインフレータ容器が破損するおそれがあることから、全車両、予防的措置として、当該インフレータを交換する。

국토교통성 · 일본2016년 2월 5일1137580연식 2004–2015원문(일본어)으로 표시 중 · 번역 대기자세히 보기 →
Stream I · 2000–2006
리콜심각실내JP

エアバッグ

助手席用エアバッグのインフレータ(膨張装置)において、ガス発生剤の成型工程が不適切又は成型後の吸湿防止装置が不適切なため、密度が不足したガス発生剤が組み込まれたものがある。そのため、エアバッグ展開時にインフレータ内圧が異常上昇し、インフレータ容器が飛散して飛び散り、出火したり負傷するおそれがある。

국토교통성 · 일본2015년 9월 4일1136380연식 2001–2002원문(일본어)으로 표시 중 · 번역 대기자세히 보기 →
Stream II · 2006–2014
리콜심각실내JP

エアバッグ

特定タイプの運転者席側SRSエアバッグのインフレータ(膨張装置)において、市場回収品を調査した結果、ガス発生剤の密度にばらつきが大きいものを確認した。このため、原因は判明していないが、エアバッグ展開時に正常に展開しないおそれがあることから、予防的措置として当該インフレータを新品に交換する。

국토교통성 · 일본2015년 7월 9일1136050연식 2007–2011원문(일본어)으로 표시 중 · 번역 대기자세히 보기 →
Stream I · 2000–2006Stream II · 2006–2014
리콜심각실내UK

Passenger side airbag may fail to deploy correctly

Abnormal deployment pressure may lead to rupture of the inflator case. In the event of an inflator rupture metal fragments could be propelled upward toward the windshield or downward toward the front passenger�s foot well potentially causing injury to a vehicle occupant.

DVSA · 영국2015년 6월 29일R/2015/104연식 2003–2008원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Stream I · 2000–2006Stream II · 2006–2014
Stream I · 2000–2006Stream II · 2006–2014
리콜심각실내JP

エアバッグ

助手席エアバッグインフレータ(膨張装置)において、市場から回収したものから、異常展開に繋がるおそれがあるガス発生剤の密度低下が認められた。このため、原因は判明していないが、一定の期間までに製造した同タイプのインフレータについて、予防的措置として当該インフレータを新品に交換する。

국토교통성 · 일본2015년 5월 14일1135680연식 2004–2007원문(일본어)으로 표시 중 · 번역 대기자세히 보기 →
Stream I · 2000–2006
리콜심각실내JP

エアバッグ

運転者席側SRSエアバッグのインフレータ(膨張装置)において、市場から回収したものから、異常展開に繋がるおそれがあるインフレータ容器内圧の異常出力が認められた。このため、原因は判明していないが、一定の期間までに製造した同タイプのインフレータについて、予防的措置として当該インフレータを新品に交換する。

국토교통성 · 일본2015년 5월 14일1135670연식 2004–2006원문(일본어)으로 표시 중 · 번역 대기자세히 보기 →
Stream I · 2000–2006
리콜심각실내UK

Passenger side airbag may fail to deploy correctly

The subject vehicles are equipped with front passenger airbag inflators which could have been assembled with improperly manufactured propellant wafers. Improperly manufactured propellant wafers could cause the inflator to rupture and the front passenger airbag to deploy abnormally in a crash. This could result in increased risk of injury to the occupant or in a thermal issue in the interior compartment which may lead to fire.

DVSA · 영국2015년 3월 16일R/2015/043연식 2003원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Stream I · 2000–2006
Stream I · 2000–2006
리콜심각실내JP

エアバッグ

助手席側エアバッグのインフレータ(膨張装置)において、他社製の車両解体作業時にインフレータ容器の破損が発生した。このため、原因は判明していないが、同年式で同タイプのインフレータはエアバッグ展開時にインフレータ容器が破損して飛び散り、出火したり乗員が負傷するおそれがあることから、全車両、予防的措置として、当該インフレータを良品と交換する。

국토교통성 · 일본2014년 12월 11일1134930연식 2003원문(일본어)으로 표시 중 · 번역 대기자세히 보기 →
Stream I · 2000–2006
리콜심각실내JP

エアバッグ

助手席用エアバッグのインフレータ(膨張装置)において、ガス発生剤の成型工程が不適切又は成型後の吸湿防止装置が不適切なため、密度が不足したガス発生剤が組み込まれたものがある。そのため、エアバッグ展開時にインフレータ内圧が異常上昇し、インフレータ容器が破損して飛び散り、出火したり乗員が負傷するおそれがある。

국토교통성 · 일본2014년 6월 23일1133750연식 2000–2005원문(일본어)으로 표시 중 · 번역 대기자세히 보기 →
Stream II · 2006–2014
리콜심각실내EU

null The passenger’s front airbag inflator could produce excessive internal pressure if it deploys,…

null The passenger’s front airbag inflator could produce excessive internal pressure if it deploys, causing the inflator to rupture. In this case, metal fragments could be propelled upwards toward the windscreen or downward towards the front passenger’s foot-well, potentially causing injury to the passenger.

Safety Gate · EU2013년 4월 24일A12/0517/13연식 2010–2013원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Stream I · 2000–2006
리콜심각실내UK

Passenger side airbag may fail to deploy correctly

The subject vehicles are equipped with front passenger airbag inflators which could have been assembled with improperly manufactured propellant wafers. Improperly manufactured propellant wafers could cause the inflator to rupture and the front passenger airbag to deploy abnormally in a crash. This could result in increased risk of injury to the occupant or in a thermal issue in the interior compartment which may lead to fire.

DVSA · 영국2013년 4월 17일R/2013/049연식 2000–2003원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Stream I · 2000–2006
리콜심각실내JP

エアバッグ

助手席用エアバッグのインフレータ(膨張装置)において、ガス発生剤の成型工程が不適切又は成型後の吸湿防止措置が不適切なため、密度が不足したガス発生剤が組み込まれたものがある。そのため、エアバッグ展開時にインフレータ内圧が異常上昇し、インフレータ容器が破損して飛び散り、出火するおそれがある。

국토교통성 · 일본2013년 4월 11일1131410연식 2000–2003원문(일본어)으로 표시 중 · 번역 대기자세히 보기 →
Stream I · 2000–2006
리콜심각실내UK

If deployed the airbags may endanger passenger

The combustion rate of the airbag propellant may be too fast causing excessive internal pressure in the inflator during airbag deployment. In an extreme case the inflator casing may rupture leading to a scattering of metal fragments.

DVSA · 영국2010년 9월 6일R/2010/087연식 2000–2001원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Stream II · 2006–2014
리콜심각실내EU

The product poses a risk of injuries because some airbag inflators may have been assembled with…

The product poses a risk of injuries because some airbag inflators may have been assembled with insufficient propellant components which, over a period of time, can result in the propellant being broken into small pieces, thus increasing its surface area. During airbag deployment, this increased surface area of propellant can cause an excessive inflator pressure. If the inflator pressure is too high the inflator case may rupture and metal fragments can pass through the airbag cushion material.

Safety Gate · EU2010년 7월 16일1083/10연식 2010원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Stream I · 2000–2006
리콜심각실내JP

エアバッグ

助手席用エアバッグのインフレータ(膨張装置)内のガス発生剤組付け作業が不適切なため、ガス発生剤の装填量が不足しているものがある。そのため、車両の振動でガス発生剤が粉状となり、エアバッグが展開するとインフレータ内圧の異常な上昇で容器が破損して構成部品が飛散し、乗員が負傷するおそれがある。

국토교통성 · 일본2010년 6월 30일1125670연식 2000–2002원문(일본어)으로 표시 중 · 번역 대기자세히 보기 →
Stream I · 2000–2006
리콜보통실내EU

Motorrijtuigen - carrosserie (beschermingsmiddelen inzittenden)

De opblaasmodule van de bestuurdersairbag kan overmatige druk opbouwen. Als de airbag wordt geactiveerd kan de interne druk ertoe leiden dat de opblaasmodule scheurt. Hierdoor kunnen metalen fragmenten losraken en weggeschoten worden.

rdw2015년 3월 16일MGP150060연식 2004원문(네덜란드어)으로 표시 중 · 번역 대기자세히 보기 →
Stream I · 2000–2006
리콜보통실내EU

Motorrijtuigen - carrosserie (beschermingsmiddelen inzittenden)

Bij voertuigen van de modeljaren 2001-2003 kan indien de passagiersairbag geactiveerd wordt de interne druk van de opblaasmodule te hoog worden. Scheurt daarbij de opblaasmodule dan kunnen metalen fragmenten losraken en wegschieten.

rdw2013년 7월 3일MGP130042연식 2002원문(네덜란드어)으로 표시 중 · 번역 대기자세히 보기 →

출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).