연료 계통, 가솔린: 공급: 연료 펌프
실리콘에 오염된 연료에 노출된 일부 스포츠 유틸리티 차량(SUV)은 연료 펌프 공급 포트에 작은 핀홀이 생길 수 있습니다. 실리콘은 영향을 받은 차량의 연료 시스템과 텍사스주 타일러 지역에서 판매되는 일부 연료에서 확인되었습니다. 이번 리콜은 텍사스주에 등록된 차량과 인접한 네 개 주인 오클라호마주, 아칸소주, 뉴멕시코주, 루이지애나주에 등록된 차량을 대상으로 실시됩니다.
🔔 무료 계정을 만들고 Isuzu Faster (모든 세대) 이메일 알림 받기
실리콘에 오염된 연료에 노출된 일부 스포츠 유틸리티 차량(SUV)은 연료 펌프 공급 포트에 작은 핀홀이 생길 수 있습니다. 실리콘은 영향을 받은 차량의 연료 시스템과 텍사스주 타일러 지역에서 판매되는 일부 연료에서 확인되었습니다. 이번 리콜은 텍사스주에 등록된 차량과 인접한 네 개 주인 오클라호마주, 아칸소주, 뉴멕시코주, 루이지애나주에 등록된 차량을 대상으로 실시됩니다.
Vehicle description: Sport utility vehicles. During the manufacture of certain fuel return hoses, incorrect rubber material for the outer layer was used.
Vehicles with 3.2 litre engines may experience dislodging of the camshaft end plug(s) from the cylinder heads causing rapid oil loss. Oil spilling on the exhaust system could result in an engine compartment fire. Correction: A camshaft end plug retaining plate kit will be installed on affected vehicles.
Constant expansion and contraction of the cylinder head causes the camshaft seal end plug can become dislodged from the cylinder head. This allows oil to leak from the camshaft.
On vehicles with automatic transmission and v6 engine, overfilling of transmission oil in conjunction with high oil temperature, could cause oil to flood through the air bleed groove in the oil level gauge plug. Leaking oil could wet the exhaust manifold and result in an engine compartment fire. Correction: Dealers will install a new automatic transmission dipstick with an improved plug design and clearer oil level marks.
On certain vehicles, a fuel return hose may not contain the desired ozone protection which could result in the hose having a reduced life expectancy. Over time, the hose may deteriorate and leak fuel. Correction: Dealers will inspect the fuel return hose date code and replace the hose if required.
Certain V6 Rodeo do not comply with the requirements of CMVSS 1105 - Evaporative Emissions. The rubber purge hose of the Enhanced Evaporative Emission Control System (EVAP) may crack, due to proximity of the exhaust pipe. Correction: Dealers will install an EVAP pipe and hose assembly using a clearance template, and will inspect routing clearances after installation.
출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).