エアバッグ
助手席側エアバッグのインフレータ(ガス発生装置)において、ガス発生剤が湿気のある状態で長期間の温度変化にさらされると劣化することがある。このため、エアバッグ展開時にインフレータ容器が破損するおそれがある。
🔔 무료 계정을 만들고 Mazda RX-8 이메일 알림 받기
助手席側エアバッグのインフレータ(ガス発生装置)において、ガス発生剤が湿気のある状態で長期間の温度変化にさらされると劣化することがある。このため、エアバッグ展開時にインフレータ容器が破損するおそれがある。
마쓰다 북미법인(Mazda North American Operations, Mazda)은 2003~2008년식 Mazda6, 2004~2005년식 MPV, 2004년식 RX-8 및 2006~2007년식 Mazdaspeed6 일부 차량에 대해 리콜을 실시합니다. 이 차량들은 앞서 진행된 다른 리콜에서 동일한 설계의 조수석 에어백 인플레이터를 교체받은 바 있습니다. 장기간 높은 절대 습도, 고온 및 온도 변화에 노출되면서 추진제가 열화되어, 인플레이터가 폭발할 수 있습니다.
Mazda North American Operations(Mazda)는 이전에 리콜 18V-716에 따라 리콜되었으나 아직 수리되지 않은 일부 2010~2011년식 Mazda RX-8 차량을 리콜하고 있습니다. 이 차량에는 순정 또는 교체용 장비로 사용된 조수석 전면 에어백 모듈의 일부로 조립된 특정 에어백 인플레이터가 장착되어 있습니다. 조수석 전면 에어백의 전개가 필요한 충돌 시, 장기간의 절대 습도 및 온도 변화 노출 후 발생하는 추진제 열화로 인해 이 인플레이터가 폭발할 수 있습니다.
암모늄 나이트레이트 추진제는 에어백 인플레이터에 사용되며, 열 순환과 수분 노출로 인해 시간이 지나면서 성능이 저하될 수 있습니다. 조수석 전면 에어백이 작동하는 경우, 과도한 내부 압력으로 인해 인플레이터 본체가 파열될 수 있으며, 이때 금속 파편이 쿠션 소재를 관통하여 탑승자에게 부상을 입힐 수 있습니다.
De passagiersairbagontsteker kan door langdurige blootstelling aan een hoge vochtigheidsgraad inwendig breken.
Passenger airbag inflators may not operate as intended.
Note: This recall is superseded by recall 2019496. Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2019496">recall 2019496</a> for more information. On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Additional Note: This is an expansion of recall 2018-038.
Mazda North America Operations(Mazda)는 알래스카, 콜로라도, 코네티컷, 아이다호, 아이오와, 메인, 매사추세츠, 미시간, 미네소타, 몬태나, 뉴햄프셔, 뉴욕, 노스다코타, 오리건, 로드아일랜드, 사우스다코타, 유타, 버몬트, 워싱턴, 위스콘신, 와이오밍 주에서 판매되었거나 등록된 적이 있는 일부 2005~2006년식 Mazda MPV 차량을 리콜합니다. 2019년 7월 9일, 이 리콜은 이전에 17V-011로 리콜되었으나 아직 수리되지 않은 일부 2005~2009년식 RX-8 차량을 포함하도록 확대되었습니다. 이 차량에는 순정 또는 교체용으로 사용된 조수석 전면 에어백 모듈의 일부로 조립된 특定 에어백 인플레이터가 장착되어 있습니다. 충돌 사고로 조수석 전면 에어백이 전개되어야 하는 경우, 이러한 인플레이터는 장기간 절대습도와 온도 변화에 노출된 후 발생하는 추진제 열화로 인해 파열될 수 있습니다.
Mazda North America Operations (Mazda) is recalling certain 2003-2008 Mazda6, 2006-2007 Mazdaspeed6 and 2004 MPV vehicles nationwide. Mazda is also recalling 2005-2006 MPV vehicles in Alabama, Arizona, Arkansas, California, Delaware, the District of Columbia, Florida, Georgia, Hawaii, Illinois, Indiana, Kansas, Kentucky, Louisiana, Maryland, Mississippi, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, South Carolina, Tennessee, Texas, Virginia, West Virginia, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands. On July 9, 2019 this recall was expanded to include certain 2004-2011 RX-8 vehicles that were previously recalled under 16V-354 but have not yet been repaired. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these passenger air bag inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Mazda North America Operations (Mazda) is recalling certain 2009-2010 Mazda RX-8 vehicles that were previously recalled under recall 18V-017 but have not yet been repaired. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Note: This recall is superseded by recall 2019496. Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2019496">recall 2019496</a> for more information. On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Additional Note: This recall supersedes recalls 2016-259 (Mazda Recall 9416E) and 2017-011 (Mazda Recall 0617A) for RX-8 models only. RX-8 model vehicles completed under those two recalls do not need to be completed under recall 2018-038 (Mazda Recall 2018A).
Mazda North American Operations (Mazda) is recalling certain model year 2003-2008 Mazda6, 2004-2008 RX-8, and 2006-2007 Mazdaspeed6 vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion and other factors, including manufacturing variability that, over time, could cause the inflator to rupture.
Note: The recall for the 2005-2008 RX-8 models has been superseded by recall <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018038">2018038 (Mazda Recall 2018A)</a>, and the recall for the 2005-2006 MPV models has been superseded by recall <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018578">2018578 (Mazda Recall 2618F)</a>. On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag inflator. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Additional note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
null The housing of the driver airbag gas generator can burst when the airbag is activated, owing to excessive internal pressure. This could cause the occupants of the vehicle to be injured by metal fragments.
助手席側エアバッグのインフレータ(ガス発生装置)において、ガス発生剤が湿気のある状態で長期間の温度変化にさらされると劣化することがある。このため、エアバッグ展開時にインフレータ容器が破損して構成部品が飛散し、乗員が負傷するおそれがある。
Note: The recall for the 2004 RX-8 model has been superseded by <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018038">recall 2018-038 (Mazda Recall 2018A)</a>, and the recall for the 2004 MPV model has been superseded by recall <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018578">2018578 (Mazda Recall 2618F)</a>. On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the airbag inflator. Additional note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
Continued exposure to high levels of absolute humidity may cause the driver�s front airbag inflator housing to rupture and deploy abnormally in the event of a crash necessitating deployment of the driver�s front airbag. Should the inflator rupture it could result in metal fragments striking the driver or other vehicle occupants.
特定の運転者席側エアバッグのインフレータ(膨張装置)において、エアバッグ展開時にインフレータ内圧で容器が破損して構成部品が飛散し、乗員が負傷するおそれがある。
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the airbag module. Note: This recall is superseded by recall 2018-036. Please see recall 2018-036 for more information. <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018036">Click here for more information</a>.
Mazda Canada is conducting a voluntary Safety Improvement Campaign concerning the driver's airbag inflator on certain vehicles equipped with Takata airbags. Mazda will replace the driver's inflator on affected vehicles. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Note: This Safety Improvement Campaign is superseded by recall 2015-247 (Mazda Recall 8215F). Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2015247">recall 2015247</a> for more information.
助手席用エアバッグのインフレータ(膨張装置)において、ガス発生剤の成型工程が不適切又は成型後の吸湿防止措置が不適切なため、密度が不足したガス発生剤が組み込まれたものがある。そのため、エアバッグ展開時にインフレータ内圧が異常上昇し、インフレータ容器が破損して飛び散り、出火したり乗員が負傷するおそれがある。
Note: For Mazda6 models, this recall is superseded by recall 2018578 (Mazda Recall 2618F). Please see recall <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018578">2018578</a> for more information. For RX-8 models, this recall is superseded by recall 2019496 (Mazda Recall 2618F). Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2019496">recall 2019496</a> for more information. On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the passenger airbag inflator. Note: This recall is an expansion of recall 2013112.
助手席用エアバッグのインフレータ(膨張装置)において、ガス発生剤の成型工程が不適切又は成型後の吸湿防止措置が不適切なため、密度が不足したガス発生剤が組み込まれたものがある。そのため、エアバッグ展開時にインフレータ内圧が異常上昇し、インフレータ容器が破損して飛び散り、出火するおそれがある。
On certain vehicles, the front passenger-side airbag was improperly wired and may not provide adequate protection in the event of a crash. Correction: Dealer will install a short wiring harness kit.
운전자 측 에어백이 작동할 때, 에어백 가스 발생기의 결함으로 인해 통제되지 않은 팽창이 일어나고 금속 파편이 방출될 수 있으며, 이로 인해 탑승자가 부상을 입을 수 있습니다.
출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).