Complaint Check engine light on. One of the below fault codes is current in the engine control module (N3/10). P04DB29, P04DB31, P04DB79 Cause Open circuit or high resistance to crankcase vent line contact Remedy 1. Check the electrical connector for the relevant vent line contact switch noted below. Refer to attached photos of connection locations. 2. Ensure the bolted connection is secure and bolt can be torqued (9Nm). 3. Check continuity from vent line connection to ME control unit. Repair wire if damage is found. The circuit from ME provides 5V and is pulled to 0V when the ground connection is intact. M260 P04DB31- S88/15 P04DB79- S88/16 M264 P04DB31- S88/15 P04DB79- S88/16 P04DB29- S88/17 M270/M274 P04DB79- S88/5 Note: This repair is not warrantable if the connection was left loose during previous repair/maintenance.
NANHTSA · 제조사 공지11008712
기술 서비스 공지
원문(영어)으로 표시 중 · 번역 대기
해당: Mercedes-Benz A-Class III (연식 2018) · Mercedes-Benz C-Class W205 (연식 2018–2020) · Mercedes-Benz CLA-Class I (연식 2019) · Mercedes-Benz E-Class V213 (연식 2021) · Mercedes-Benz GLC I (연식 2019) · Mercedes-Benz GLE-Class GLE (W167/C167) (연식 2020) · Mercedes-Benz SLK-Class R172 (연식 2016–2017)
출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).