Some vehicles may exhibit an interference between the front (1) and the rear door bright window glass molding (2) due to the bright window glass molding shifting backward when opening/closing the front door. This is caused by an inappropriate position of the positioning tab on the front door glass run-channel. To eliminate this concern, double-sided tape has been added to the front door glass run-channel, and the shape of the rear end of the front door glass run-channel has been modified to prevent the bright window glass molding from shifting. Customers having this concern should have their vehicle repaired using the following repair procedure. REPAIR PROCEDURE 1. Verify the customer concern. 2. Replace the front glass run-channel(s) with a modified one(s) according to the instructions in MGSS (FRONT DOOR GLASS RUN-CHANNEL REMOVAL/INSTALLATION). NOTE: Repair only the side with the issue. ATTENTION: Removing the front beltline moldings is unnecessary for this repair procedure when replacing the front door glass run-channel. 3. Verify the repair.
NANHTSA · 제조사 공지11030601
기술 서비스 공지
원문(영어)으로 표시 중 · 번역 대기
해당: Mazda CX-90 (연식 2024)
출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).