무료 열람 · 무료 계정으로 기여Anticars(2000)의 후속
로그인계정 만들기
NANHTSA · 제조사 공지11033334

기술 서비스 공지

원문(영어)으로 표시 중 · 번역 대기

Park Assist Sensor 3 and 4 Harness Swap This bulletin provides information regarding the wire harness connectors for Park Assist Sensors #3 and #4. The harnesses for these sensors are visually identical and may have been interchanged during vehicleassembly. If diagnosis indicates a concern related to Park Assist Sensors #3 or #4, or associated wiring, visually inspect the harness connections to verify correct installation before proceeding with further repair Fig. 1. If the connectors are found to be swapped, release the harnesses from the retaining clips as necessary, disconnect, and reinstall each connector to the correct sensor location. Ensure harnesses are properly secured after repositioning.

해당: Dodge Ram IV (2009) (연식 2026)

공식 공지 ↗

출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).