무료 열람 · 무료 계정으로 기여Anticars(2000)의 후속
로그인계정 만들기
NANHTSA · 미국03V5270002003년 12월 11일

Steering:Rack and pinion

원문(영어)으로 표시 중 · 번역 대기

Certain passenger vehicles have lower pinion bearings in the power rack and pinion assembly in which the retainer tabs were not crimped properly. These retainers could fail and permit the ball bearings to escape.

위험: If this occurs, the pinion shaft can be forced upward during left turns and back down as the steering wheel is moved back and to the right. If the pinion shaft moves further, the driver will need to exert more effort to turn the steering wheel, similar to a vehicle without power assisted steering. If the pinion shaft moves even further, the driver will require much higher effort to turn left and may not be able to turn the wheel as much as intended. With the maximum pinion shaft movement, which requires internal gear component damage, the driver can encounter high resistance to turning left, followed by unintended power assist to the right. In any of these conditions, a crash could occur.

조치: Dealers will install a new lower pinion bearing unless inspect of the existing bearing indicates that replacement of the gear assembly is necessary. Owner notification began on february 5, 2004. Owners should contact buick at 1-866-608-8080; chevrolet at 1-800-630-2438; oldsmobile at 1-800-630-6537; or pontiac at 1-800-620-7668.

해당: Buick Regal IV (연식 1996–1998) · Chevrolet Lumina II (연식 1997–1998) · Chevrolet Malibu V (연식 1997–1998) · Chevrolet Monte Carlo V (연식 1997–1998) · Oldsmobile Cutlass Supreme V (연식 1996–1997) · Oldsmobile Intrigue (연식 1998) · Pontiac Grand Prix VII (연식 1996)

공식 공지 ↗

출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0).