This is a Technical Journal: Low Battery Message, Engine Remote Start inop, flat 12V battery Service: The most recent VCM software release can cause any or all of the above symptoms. *The current solution is to install VCM repair software by following the procedure below: 1. Perform a Total Upgrade according to TJ 31543 to bring all vehicle nodes to the latest software status. The Upgrades list in VIDA should be empty before proceeding. *2. Download the appropriate SP below to prevent the above symptoms and re-enable ERS XC90: SP 31676890, CMQ VCM Fix S90: SP 31676891, CMQ VCM Fix 3. Drive the vehicle over 20mph to release the VCM from diagnostic mode. ERS will be unavailable until this is done. 4. Close and lock the vehicle for 3+ minutes to allow the network to shut down before testing ERS. PLEASE NOTE - DO NOT perform a Total Upgrade or VCM Upgrade after performing this procedure (they will now appear in the Upgrades list). Doing so will re-install the affected software. - Not all battery drains are caused by this issue. *The repair software will be integrated with regular VCM Upgrade/Reload and Total Upgrade/PDS/Service 2.0 packages in the coming weeks *This TJ will be updated when the updated software packages are available.
NANHTSA · 제조사 공지10167890
기술 서비스 공지
원문(영어)으로 표시 중 · 번역 대기
해당: Volvo S90 (연식 2017) · Volvo XC90 II (연식 2017)
출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).