Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 Nm [21 ft. lbs.].
NANHTSA · 제조사 공지10223854
기술 서비스 공지
원문(영어)으로 표시 중 · 번역 대기
해당: Dodge Avenger sedan (연식 2008) · Dodge Caravan IV (연식 2007) · Dodge Challenger (연식 2008) · Dodge Durango II (연식 2007) · Dodge Magnum (2005–2008) (연식 2007) · Dodge Neon II (연식 2001) · Dodge Nitro (연식 2007) · Dodge Ram II (연식 1998) · Dodge Ram SRT-10 (연식 2006) · Dodge Ram Van III (연식 2001) · Dodge SRT-4 (연식 2005) · Ram ProMaster III (연식 2015–2016)
출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).