무료 열람 · 무료 계정으로 기여Anticars(2000)의 후속

Porsche 944

1982–1991 · 1 세대 · 결함 2건 · 2개 시장
세대
모든 세대9441982–19912158
연식
리콜심각엔진NA

Fuel System

The short section of high pressure fuel hose between the fuel rail and the fuel pressure regulator, which runs alongside the intake manifold, may be subject to hardening. In the event that this line does harden, fuel leaks could develop between the hose and metal pipe fittings. Leaking fuel could ignite on the hot exhaust system and lead to an engine compartment fire. Correction: Fuel hose will be replaced on 924s, 944 and 944 turbo vehicles and the fuel hose and fuel rail will be replaced on 944s vehicles.

캐나다 교통부1990년 4월 4일1990051연식 1985–1988원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
리콜심각엔진NA

Fuel system, gasoline:Fuel injection system:Fuel rail

The hose material used in the short section of the high pressure fuel line hose, between the fuel rail and fuel pressure regulator, is subject to hardening, and could cause fuel leaks between the hose and the metal pipe fittings.

NHTSA · 미국1990년 4월 2일90V061000연식 1985–1988원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
리콜심각엔진NA

Fuel system, gasoline:Delivery:Hoses, lines/piping, and fittings

The protective sleeve covering of the return fuel hose between the pressure regulator and fuel return pipe was shortened leaving part of the hose exposed. In some instances this part of the hose becomes kinked due to the engine compartment heat and/or the routing of the hose. Consequence of defect: If this occurs it could restrict and damage the return fuel hose which could lead to fuel leakage and cause an engine compartment fire.

NHTSA · 미국1986년 6월 12일86V077000연식 1986원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
리콜심각엔진NA

Fuel system, gasoline:Delivery:Hoses, lines/piping, and fittings

Fuel hose may be damaged due to too much pressure in crimping the hose end fitting. Consequence of defect: A fuel leak could develop which could cause a loss in system pressure and engine stalling. Also, fuel vapors in the engine compartment could be ignited by a spark and cause a fire.

NHTSA · 미국1985년 4월 9일85V039000연식 1985원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
리콜보통엔진NA

리콜

The fuel supply hose to the pressure damper in the engine compartment may develop a leak between the flex hose and the threaded connector due to improper crimping of the fitting. This will cause the fuel pressure in the injection system to drop, resulting in engine stalling. A stalled vehicle could pose a threat to traffic safety.

캐나다 교통부1985년 4월 12일1985040연식 1985원문(영어)으로 표시 중 · 번역 대기자세히 보기 →

출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).