Boletim
This bulletin provides information when the fuel tank cap seal is leaking; DTC P044200, P045600 and/ or P00EF00 in stored in the ECM.
🔔 Crie uma conta gratuita para receber alertas por e-mail sobre Audi e-tron (todas as gerações)
Os boletins técnicos (TSB) são instruções de reparação que os fabricantes enviam aos concessionários sobre problemas conhecidos. Não são recalls de segurança, mas muitas vezes confirmam um defeito.
This bulletin provides information when the fuel tank cap seal is leaking; DTC P044200, P045600 and/ or P00EF00 in stored in the ECM.
This bulletin provides information when the fuel tank cap seal is leaking; DTC P044200, P045600 and/ or P00EF00 in stored in the ECM.
G13 coolant was mistakenly filled into the affected vehicles instead of G12evo coolant during a workshop visit. In certain circumstances, this could result in a cooling system leak.
G13 coolant was mistakenly filled into the affected vehicles instead of G12evo coolant during a workshop visit. In certain circumstances, this could result in a cooling system leak.
This bulletin provides information when the ignition cannot be switched on, DTC "U043100" or "U014100" stored in gateway (DA0019).
This bulletin provides information when there is an engine start system warning, or power unit start system warning, B200047.
This bulletin provides information when there is an engine start system warning, or power unit start system warning, B200047.
This bulletin provides information when there is an Engine Start system warning or Power unit start system warning, B200047.
This bulletin provides information for when there is an Engine Start system warning, or Power Unit start system warning, B200047.
This bulletin contains instructions for when to add gasoline additives for cleaning the injectors.
A highly sporadic startup timing issue can cause a message "CNG inspection Due! CNG Mode not available. Please contact workshop". This is a normal condition which can be resolved by recycling the ignition and repairs are not needed.
A highly sporadic startup timing issue can cause a message "CNG inspection Due! CNG Mode not available. Please contact workshop". This is a normal condition which can be resolved by recycling the ignition and repairs are not needed.
This technical service bulletin reminds the reader to check for metal debris when replacing an engine.
This bulletin contains a OBD adapation that addresses an oil service in a vehicle that doesn't have oil.
Removed the Note reference at the beginning of the chart that referenced oil change and air filter change, as it doesn't have either.
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).