Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

Audi S6

1994–2025 · 5 gerações · 4 defeitos documentados · 2 mercados
Gerações

Os boletins técnicos (TSB) são instruções de reparação que os fabricantes enviam aos concessionários sobre problemas conhecidos. Não são recalls de segurança, mas muitas vezes confirmam um defeito.

Ano do modelo
S6 V · 2018–2025
BoletimModeradoMotorNA

Boletim

This bulletin provides information when the fuel tank cap seal is leaking; DTC P044200, P045600 and/ or P00EF00 in stored in the ECM.

NHTSA · boletim do fabricante11034668Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
S6 V · 2018–2025
BoletimModeradoMotorNA

Boletim

This bulletin provides information regarding UV leak additive for finding oil leaks.

NHTSA · boletim do fabricante11028398Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
S6 V · 2018–2025
BoletimModeradoMotorNA

Boletim

This bulletin provides information when the fuel tank cap seal is leaking; DTC P044200, P045600 and/ or P00EF00 in stored in the ECM.

NHTSA · boletim do fabricante11025354Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
S6 V · 2018–2025
BoletimModeradoMotorNA

Boletim

This bulleitn provides information regarding UV Leak additive for finding oil leaks.

NHTSA · boletim do fabricante11022633Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
S6 IV (C6) · 2012–2018
BoletimModeradoMotorNA

Boletim

The oil filter bypass valve on certain 2013 model year Audi 4.0L vehicles may not be present or may have been incorrectly installed during production.

NHTSA · boletim do fabricante10120717Anos-modelo 2013Exibido no inglês original · tradução pendenteVer detalhes →
S6 IV (C6) · 2012–2018
BoletimModeradoMotorNA

Boletim

This document contains the notice about an upcoming Service action on the oil filter bypass valve. The oil filter bypass valve may not be present or may have been incorrectly installed during production.

NHTSA · boletim do fabricante10119889Anos-modelo 2013Exibido no inglês original · tradução pendenteVer detalhes →
S6 V · 2018–2025
BoletimLeveMotorNA

Boletim

This bulletin provides information when DTC B105A1A, B103E25 is stored in 0017; fuel tank level implausible.

NHTSA · boletim do fabricante11035829Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
S6 V · 2018–2025
BoletimLeveMotorNA

Boletim

This bulletin provides information when DTC B105A1A, B103E25 is stored in 0017; fuel tank level implausible.

NHTSA · boletim do fabricante11035828Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
S6 V · 2018–2025
BoletimLeveMotorNA

Boletim

This bulletin provides information when there is increased oil consumption; >0.5ltr/1000 km.

NHTSA · boletim do fabricante11034657Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
S6 V · 2018–2025
BoletimLeveMotorNA

Boletim

This bulletin provides information when there is increased oil consumption; >0.5ltr/1000 km.

NHTSA · boletim do fabricante11027356Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
S6 IV (C6) · 2012–2018
BoletimLeveMotorNA

Boletim

The fuel metering valve of the high-pressure fuel pump is controlled by a specific on/off ratio. If there is a low system voltage, the on/off ratio may not be enough to keep the fuel metering valve constant in all areas. In such a situation, the fuel metering valve is deactivated and the high-pressure fuel pump switches to full supply mode. Because the increased rail pressure does not match the respective driving situation, the DTC appears.

NHTSA · boletim do fabricante10228391Anos-modelo 2013Exibido no inglês original · tradução pendenteVer detalhes →
S6 IV (C6) · 2012–2018
BoletimLeveMotorNA

Boletim

The fuel metering valve of the high-pressure fuel pump is controlled by a specific on/off ratio. If there is a low system voltage, the on/off ratio may not be enough to keep the fuel metering valve constant in all areas. In such a situation, the fuel metering valve is deactivated and the high-pressure fuel pump switches to full supply mode. Because the increased rail pressure does not match the respective driving situation, the DTC appears.

NHTSA · boletim do fabricante10225070Anos-modelo 2013Exibido no inglês original · tradução pendenteVer detalhes →
S6 IV (C6) · 2012–2018
BoletimLeveMotorNA

Boletim

The fuel metering valve of the high-pressure fuel pump is controlled by a specific on/off ratio. If there is a low system voltage, the on/off ratio may not be enough to keep the fuel metering valve constant in all areas. In such a situation, the fuel metering valve is deactivated and the high-pressure fuel pump switches to full supply mode. Because the increased rail pressure does not match the respective driving situation, the DTC appears.

NHTSA · boletim do fabricante10222043Anos-modelo 2013Exibido no inglês original · tradução pendenteVer detalhes →
S6 IV (C6) · 2012–2018
BoletimLeveMotorNA

Boletim

There may be slow coolant loss from the connections of the coolant feed pipe and coolant return pipe. High temperatures cause the coolant to become encrusted on the connection flange of the turbocharger (Figure 1).

NHTSA · boletim do fabricante10216668Anos-modelo 2013Exibido no inglês original · tradução pendenteVer detalhes →
S6 V · 2018–2025
BoletimLeveMotorNA

Boletim

A highly sporadic startup timing issue can cause a message "CNG inspection Due! CNG Mode not available. Please contact workshop". This is a normal condition which can be resolved by recycling the ignition and repairs are not needed.

NHTSA · boletim do fabricante10214760Anos-modelo 2022Exibido no inglês original · tradução pendenteVer detalhes →
S6 V · 2018–2025
BoletimLeveMotorNA

Boletim

A highly sporadic startup timing issue can cause a message "CNG inspection Due! CNG Mode not available. Please contact workshop". This is a normal condition which can be resolved by recycling the ignition and repairs are not needed.

NHTSA · boletim do fabricante10212939Anos-modelo 2022Exibido no inglês original · tradução pendenteVer detalhes →
S6 IV (C6) · 2012–2018
BoletimLeveMotorNA

Boletim

Poor internal contact area on circuit board will lead to faults. Oil additives can cause the plastic circuit plates to delaminate, causing contact loss.

NHTSA · boletim do fabricante10210635Anos-modelo 2013Exibido no inglês original · tradução pendenteVer detalhes →
S6 IV (C6) · 2012–2018
BoletimLeveMotorNA

Boletim

Oil Capacity Table: Changed Oil Specs for all models

NHTSA · boletim do fabricante10157225Anos-modelo 2018Exibido no inglês original · tradução pendenteVer detalhes →
S6 IV (C6) · 2012–2018
BoletimLeveMotorNA

Boletim

Oil Capacity Table: Changed Oil Specs for all models

NHTSA · boletim do fabricante10155701Anos-modelo 2018Exibido no inglês original · tradução pendenteVer detalhes →
S6 IV (C6) · 2012–2018
BoletimLeveMotorNA

Boletim

Added Oil Capacity Chart at the end of the document.

NHTSA · boletim do fabricante10153113Anos-modelo 2018Exibido no inglês original · tradução pendenteVer detalhes →
S6 IV (C6) · 2012–2018
BoletimLeveMotorNA

Boletim

This bulletin contains repair information for a malfunctioning V50 coolant recirculation pump that prevents the passenger side from heating properly with DTC B10D004 or B11D501.

NHTSA · boletim do fabricante10153062Anos-modelo 2015Exibido no inglês original · tradução pendenteVer detalhes →
S6 IV (C6) · 2012–2018
BoletimLeveMotorNA

Boletim

Added Oil Capacity Chart at the end of the document.

NHTSA · boletim do fabricante10153110Anos-modelo 2017Exibido no inglês original · tradução pendenteVer detalhes →
S6 IV (C6) · 2012–2018
BoletimLeveMotorNA

Boletim

Major Maintenance Section: ADDED: "(except A3 e-tron)" at the end of "Cooling system - Check coolant level, add coolant if necessary, and check protection to spec -25C"

NHTSA · boletim do fabricante10133435Anos-modelo 2017Exibido no inglês original · tradução pendenteVer detalhes →
S6 IV (C6) · 2012–2018
BoletimLeveMotorNA

Boletim

Oil Capacity Table: For A3 B-Cycle 2.0 TFSI engine: Changed oil spec from 508/509** Castrol EDGE Professional 5W40 to 508/509** Castrol EDGE Professional 0W20 Long Life IV

NHTSA · boletim do fabricante10133281Anos-modelo 2018Exibido no inglês original · tradução pendenteVer detalhes →
S6 IV (C6) · 2012–2018
BoletimLeveMotorNA

Boletim

Spark Plugs: replace at 55,000 miles (85,000 km) or 6 years, whichever occurs first. Thereafter, every 60,000 miles (90,000 km) or 6 years, whichever occurs first Added: 2.0L TFSI (Q3) For 35/75/115 Mile Spark Plug interval: Added Q3 to exclusion of Flex Fuel Engines.

NHTSA · boletim do fabricante10130214Anos-modelo 2015Exibido no inglês original · tradução pendenteVer detalhes →
Mais antigos →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).