On certain 318I, 318IS, 325I, 325IS, 525I, 525IT, 535I, 735I, 735IL, 750IL, 850I and M5, the locking tab for the airbag contact ring in the steering wheel assembly could break without warning. If this happens it is possible that the contact ring wiring could break. This would cause the readiness indicator lamp ("SRS" or "AIRBAG") to illuminate and in such a case the airbag would not be available for deployment in a frontal impact. Correction: Locking tab will be replaced with one of a different design.
Transport Canada7 de out. de 19961996159Anos-modelo 1991–1992Exibido no inglês original · tradução pendenteVer detalhes →
Em determinados veículos, a falha de um componente do sistema de arrefecimento, como o termostato, a bomba d'água ou a correia do ventilador, pode resultar em um aumento significativo da temperatura do líquido de arrefecimento e da pressão do sistema. O aumento da pressão do sistema pode provocar a formação de uma trinca ou a separação de uma costura na extremidade do núcleo do aquecedor, o que faria com que o líquido de arrefecimento quente fosse expelido do núcleo do aquecedor. Esse fluido quente pode atingir os ocupantes do veículo, resultando em possíveis lesões pessoais e/ou embaçamento das superfícies internas dos vidros. Correção: o tampão do radiador será substituído por um novo tampão de projeto diferente, a fim de evitar o acúmulo de pressão excessiva no sistema de arrefecimento.
Transport Canada14 de out. de 19981998197Anos-modelo 1988–1993Traduzido automaticamente · original: inglêsVer detalhes →
On certain 525I, 535I, 735I, 735IL and 750IL vehicles, the front seat center fold-down armrest may contact and damage the seatbelt buckle if the seat back is moved forward to an upright position while the armrest is locked in the down position (horizontal). If this occurs, the release button may be held in the down position, preventing the seatbelt from being latched during the buckle-up operation. Non-latching of the seatbelts will increase the risk of personal injury in the event of a crash. Correction: Front seat safety belt buckles will be replaced with shorter ones that are not susceptible to damage by contact with the armrest.
Transport Canada27 de fev. de 19901990037Anos-modelo 1988–1990Exibido no inglês original · tradução pendenteVer detalhes →
Under certain conditions, front seat center, fold-down arm rest may contact the safety belt buckle, causing damage to the release button and preventing the belt tongue from latching when buckling up.
NHTSA · Estados Unidos30 de jan. de 199090V016000Anos-modelo 1988–1990Exibido no inglês original · tradução pendenteVer detalhes →
On certain 725I, 735IA and 750IL vehicles, on the front seats, the seatbacks may not have been fully seated on the recliner arms. This could result in looseness of, or noise in the seat. In extreme cases, during a severe rear impact, the seatback may not support the occupant and increase the risk of injury. Correction: Seatbacks will be inspected and properly seated if required.
Transport Canada25 de ago. de 19881988124Anos-modelo 1988Exibido no inglês original · tradução pendenteVer detalhes →
The driver and/or passenger seatbacks may not have been fully attached to the seat base reclining arms (attaching brackets).
NHTSA · Estados Unidos11 de ago. de 198888V135000Anos-modelo 1988Exibido no inglês original · tradução pendenteVer detalhes →
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).