Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

BMW Z4 (E89)

2009–2016 · 9 defeitos documentados · 3 mercados

Os boletins técnicos (TSB) são instruções de reparação que os fabricantes enviam aos concessionários sobre problemas conhecidos. Não são recalls de segurança, mas muitas vezes confirmam um defeito.

Ano do modelo
BoletimModeradoMotorNA

Boletim

Delivery Stop: 2013 3 Series Emissions Label. A Delivery Stop has been issued by BMW AG to correct the Vehicle Emissions Control Information (VECI) label. Affected are certain 2013 Model Year 3 Series vehicles with xDrive. Vehicles included in the attached chassis number list must not be delivered until the correct VECI label has been installed. Service and parts instructions will be provided as soon as the labels are available for ordering (estimate: 1 week).

NHTSA · boletim do fabricante10149497Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoMotorNA

Boletim

BMW Parts Bulletin TEC7W Rear Silencer with Exhaust Flap Return BMW AG has requested an inspection of the following part numbers: 18 30 8 604 208, 18 30 8 604 209 Stock should not be sold or installed on any vehicle. All Rear Silencer with a manufacturing date before 22.04.14 (DD.MM.YY) need to be returned. Parts with manufacturing date from 22.04.14 are ok to use. (Illustration below) Please return all part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC7W must appear in the text of your TEC claim. TEC7W is valid from September 26, 2014, through October 10, 2014. The deadline for filing a claim under TEC7W is October 10, 2014. All parts must be returned to your facing RDC no later than October 24, 2014. Please re-order the same part numbers as needed.

NHTSA · boletim do fabricante10148048Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoMotorNA

Boletim

Bmw: Oil separator-cold climate conditions. Certain areas of the us experience extremely cold climate conditions during the winter months. A small number of vehicles have experienced problems ranging from leaking or broken valve covers to complete engine failure. Include models e39, 46, 53, 60, 83, and e85. No model years listed. *pe

NHTSA · boletim do fabricante10034667Anos-modelo 2010Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

MINI engine oil part number transition and model year 2016 engine oils

NHTSA · boletim do fabricante10216758Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

TEC26 Turbo Charger Return

NHTSA · boletim do fabricante10216793Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

"Diretrizes de Inspeção CPO (MINI NEXT): Motores que Requerem uma Caixa TSE PuMA. Veículos com um histórico de manutenção questionável de ""serviço de óleo de motor"" podem necessitar de uma consideração adicional e revisão TSE antes de prosseguir com o processo de inspeção CPO."

NHTSA · boletim do fabricante10150045Traduzido automaticamente · original: inglêsVer detalhes →
BoletimLeveMotorNA

Boletim

The customer complains of loss of performance and turbocharger noise. CAUSE The turbocharger oil supply may be restricted, causing oil starvation and resulting in the seizing of the turbocharger assembly.

NHTSA · boletim do fabricante10149578Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Engine Oil Quick Reference CHART and Drain Plug Torque. INFORMATION All vehicles with the B38, B46, B48, B58, N20, N26, N47, N54 (E89 only), N55, N57, B57, N63, N63R, N63TU, N63M, S55, S63, S63M, S63R, S63T, N74, W20, XB1H, XB2H and XB4 engines.

NHTSA · boletim do fabricante10149565Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Delivery Stop: 2013 3 Series Emissions Label Update. Vehicle Emissions Control Information (VECI) labels are now available for vehicles affected by the Delivery Stop. Refer to Service Information bulletin B71 01 13 for complete details.

NHTSA · boletim do fabricante10149496Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

"MMINI Original Parts (New and Remanufactured): Limited Warranty Coverage Terms and Conditions. INFORMATION MINI USA, a division of BMW of North America, LLC (""MINI USA"") warrants eligible MINI Original Parts (New and Remanufactured) against defects in materials and workmanship for a period of 24 months without mileage limitation (Submit as a Warranty Claim Type 2 - new or Type 3 - exchange). Parts replaced under the MINI USA Limited Parts Warranty receives the remainder of the original 24 months without mileage limitation coverage, should subsequent failure(s) occur. The labor required to replace a part including diagnosis is also covered when the part's warranty repair is performed by an authorized MINI dealer. Part replacements under a new passenger car limited warranty or program are not eligible for parts warranty coverage. They are only eligible for the remaining portion of the new passenger car limited warranty or program coverage. DETERMINING A PART'S WARRANTY ELIGIBILITY MINI Original Parts A. Replacements under Warranty and Program Coverage, as applicable: * Are warranted for the remainder of the New Passenger Limited Warranty, the Federal, State or MINI Emissions Warranty or Program Coverage period (Submit as a Warranty Claim - Type 1). Prior to delivery: New parts must always be used to repair new vehicles in-stock (not entered into service, no in-service date). Do not use remanufactured parts. After delivery (vehicles in-service): Parts, components or assemblies must be replaced with remanufactured units, when applicable and available through MINI USA. B. Replacements under Field Authorized (FAS) Goodwill: * Receive the remainder of the New Passenger Car Limited Warranty, the Federal, State or MINI Emissions Warranty (Submit as a Warranty Claim - Type 1); or * 24 month parts warranty coverage without mileage limitation with customer's participation toward the cost of the previous goodwill repair (Submit as a Warranty Claim - Type 2 or 3). C. Replacem

NHTSA · boletim do fabricante10147964Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

"MINI Original Parts (New and Remanufactured): Limited Warranty Coverage Terms and Conditions. INFORMATION MINI USA, a division of BMW of North America, LLC (""MINI USA"") warrants eligible MINI Original Parts (New and Remanufactured) against defects in materials and workmanship for a period of 24 months without mileage limitation (Submit as a Warranty Claim Type 2 - new or Type 3 - exchange). Parts replaced under the MINI USA Limited Parts Warranty receives the remainder of the original 24 months without mileage limitation coverage, should subsequent failure(s) occur. The labor required to replace a part including diagnosis is also covered when the part's warranty repair is performed by an authorized MINI dealer. Part replacements under a new passenger car limited warranty or program are not eligible for parts warranty coverage. They are only eligible for the remaining portion of the new passenger car limited warranty or program coverage. DETERMINING A PART'S WARRANTY ELIGIBILITY MINI Original Parts A. Replacements under Warranty and Program Coverage, as applicable: * Are warranted for the remainder of the New Passenger Limited Warranty, the Federal, State or MINI Emissions Warranty or Program Coverage period (Submit as a Warranty Claim - Type 1). Prior to delivery: New parts must always be used to repair new vehicles in-stock (not entered into service, no in-service date). Do not use remanufactured parts. After delivery (vehicles in-service): Parts, components or assemblies must be replaced with remanufactured units, when applicable and available through MINI USA. B. Replacements under Field Authorized (FAS) Goodwill: * Receive the remainder of the New Passenger Car Limited Warranty, the Federal, State or MINI Emissions Warranty (Submit as a Warranty Claim - Type 1); or * 24 month parts warranty coverage without mileage limitation with customer's participation toward the cost of the previous goodwill repair (Submit as a Warranty Claim - Type 2 or 3). C. Replaceme

NHTSA · boletim do fabricante10147988Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

?SI B11 01 15December 2015 EngineTechnical Service This Service Information bulletin supersedes SI B11 01 15 dated October 2015. designates changes to this revision SUBJECT BMW Engine Oil Part Number Transition and Model Year 2016 Engine Oils. INFORMATION Part numbers of the recommended engine oils have changed. Use the quick reference chart in Section 1 to help identify which new engine oil part numbers should be used when the old part number stock is depleted. Use the quick reference chart in Section 2 to help identify which new engine oil viscosities and part numbers should be used in Model Year 2016 and newer vehicles.

NHTSA · boletim do fabricante10147859Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Update 2: Availability of Fuel Pump 16 14 7 708 047. Due to limited availability, Fuel Pump Assembly 16 14 7 708 047 has been placed on hold pending arrival of additional inventory. At this time, inventory will only be released to dealers with motorcycles down in the workshop for repair. Until further notice, If you have a motorcycle in urgent need of this part please send an e-mail request to motorradaftersales@bmwna.com with the following information: Email Subject: 7708047 Request Dealer XXXXX

NHTSA · boletim do fabricante10147893Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Due to previous programming errors, affected vehicles had the CBS oil service conversion performed as part of the N63 CCP campaign (SI B11 16 14), but the desired interval change to 12 months/15,000 km/10,000 miles was not completed correctly.

NHTSA · boletim do fabricante10147865Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

MINI Engine Oil Part Number Transition and Model Year 2016 Engine Oils. INFORMATION Part numbers of the recommended engine oils have changed. Use the quick reference chart in Section 1 to help identify which new engine oil part numbers should be used when the old part number stock is depleted. Use the quick reference chart in Section 2 to help identify which new engine oil viscosities and part numbers should be used in Model Year 2016 and newer vehicles.

NHTSA · boletim do fabricante10147905Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

BMW Motorrad is issuing this notification to the effect that the telescopic fork oil used to date, which has an SAE viscosity class of 7.5, has been changed to an oil with SAE viscosity class 11.5.

NHTSA · boletim do fabricante10147846Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Engine Replacement: Filling Engine with Engine Oil Before First Start. If the new or remanufactured replacement engine is started to determine electronically if the engine is filled with the appropriate amount of engine oil, damage to the replacement engine can occur immediately. The engine may have some residual engine oil from assembly, but this is not enough engine oil to properly lubricate the engine to measure the engine oil level electronically when it is started for the first time. Further, the electronic engine oil measurement is only operational when the engine is running at its full operating temperature. Checking the engine oil without the engine running at operating temperature will lead to an incorrect or incomplete measurement.

NHTSA · boletim do fabricante10147126Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Bmw: Loss of performance and turbocharger noise due to the oil supply restricted, causing oil starvation and resulting in the seizing of the turbocharger assembly. *rm updated 7/09/13. *pe updated 9/25/15. *pe

NHTSA · boletim do fabricante10040845Anos-modelo 2010Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Bmw: The vent hole of the cooling hose coupling on the drivers side of the radiator may be blocked. There is a procedure for checking and fixing the problem. *rm

NHTSA · boletim do fabricante10037255Anos-modelo 2010Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Service action to reprogram the dme for low oil level indicator. From start of production up to 11/22/2002. *tt

NHTSA · boletim do fabricante10004532Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Failure of the soft top hydraulic pump, and when the pump/motor assembly is removed from the plastic housing, it is found to be damaged by water. *tt

NHTSA · boletim do fabricante10003002Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Reprogram dme for low oil level indicator. Start of production up to 11/22/2002. *tt

NHTSA · boletim do fabricante10001003Exibido no inglês original · tradução pendenteVer detalhes →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).