General Motors LLC (GM) is recalling certain 2018 Buick Regal vehicles. During the manufacturing process, the rear seat belts may have been improperly routed around the bolster bracket on the rear outboard seats, which can cause inadequate restraint of the passengers.
NHTSA · Estados Unidos12 de abr. de 201818V230000Anos-modelo 2018Exibido no inglês original · tradução pendenteVer detalhes →
General Motors LLC (GM) is recalling certain model year 2011 Buick Regal vehicles manufactured November 3, 2009, to March 25, 2011, equipped with 8-way power adjustable front seats. The power seat wiring harness may contact the seat frame, causing the wires to chafe.
NHTSA · Estados Unidos7 de jul. de 201616V517000Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Descrição do veículo: Certos veículos de passageiros, equipados com etiquetas de airbag localizadas no para-sol, não estão em conformidade com o Padrão Federal de Segurança de Veículos Automotores nº 208, "Proteção de Ocupantes em Colisões". Esses veículos possuem uma área de mensagem inferior a 30 cm, o que não atende aos requisitos do padrão.
NHTSA · Estados Unidos6 de abr. de 200101V109000Anos-modelo 2000–2001Traduzido automaticamente · original: inglêsVer detalhes →
Veículos de passageiros. Alguns desses veículos apresentam uma condição em que o inflador do airbag lateral do lado do motorista se separa do módulo do airbag durante a implantação.
NHTSA · Estados Unidos13 de nov. de 200000V371000Anos-modelo 2000–2001Traduzido automaticamente · original: inglêsVer detalhes →
Descrição do veículo: Veículos de passageiros. A corrosão da fiação interna do inflador do airbag, que pode ocorrer com o tempo, pode causar a implantação involuntária do airbag do motorista. Essa implantação pode ocorrer durante a partida do veículo, enquanto o veículo está estacionado ou em marcha lenta, ou durante a operação.
NHTSA · Estados Unidos3 de jul. de 200000V171000Anos-modelo 1995Traduzido automaticamente · original: inglêsVer detalhes →
Left handed driver's side shoulder belt anchor plate may be upside down in lock pillar so that the unthreaded slot of the plate aligned with the hole in the lock pillar. This resulted in the anchor bolt being driven into the slot instead of the threaded hole of the anchor plate. Consequence of defect: In a vehicle crash, belt anchor bolt may pull loose from anchor plate, thus failing to comply with fmvss 210, seat belt assembly anchorages, and increases likelihood of injury to occupant.
NHTSA · Estados Unidos14 de jul. de 198686V093000Anos-modelo 1986Exibido no inglês original · tradução pendenteVer detalhes →
General Motors LLC (GM) is recalling certain model year 2011-2012 Buick LaCrosse, Regal and Chevrolet Camaro, as well as certain 2010-2012 Cadillac SRX, Chevrolet Equinox and GMC Terrain vehicles, equipped with power height adjustable driver and passenger seats. In the affected vehicles, the bolt that secures the driver's and passenger's power front seat height adjuster may fall out causing the seat to drop suddenly to the lowest vertical position.
NHTSA · Estados Unidos23 de jul. de 201414V447000Anos-modelo 2011–2012Exibido no inglês original · tradução pendenteVer detalhes →
Vehicle description: Passenger vehicles, light duty trucks, sport utility vehicles, and mini vans equipped with trw seat belt buckle assemblies. The buckle base of these seat belt assemblies were not properly heat treated and therefore do not pass the load bearing requirement of federal motor vehicle safety standard no. 209, "seat belt assemblies."
NHTSA · Estados Unidos7 de ago. de 200000V228003Anos-modelo 2000–2001Exibido no inglês original · tradução pendenteVer detalhes →
Certain vehicles may have a centre rear seatbelt anchor plate which exhibits stress cracks. In the event of a vehicle crash, the seatbelt system may fracture and injury to the seat occupant could occur. Correction: Centre rear seat belt system will be replaced.
Transport Canada23 de abr. de 19971997090Anos-modelo 1995Exibido no inglês original · tradução pendenteVer detalhes →
The driver and passenger front seat manual reclining mechanisms do not comply with the requirements of fmvss 207, "seating systems." the seat back mechanisms will not latch under certain conditions.
NHTSA · Estados Unidos9 de mar. de 199393V035000Anos-modelo 1993Exibido no inglês original · tradução pendenteVer detalhes →
Certain vehicles may not comply with CMVSS 207 - Anchorage of Seats. Front seat back recliner mechanism may not latch properly. Correction: Driver and passenger front seat back recliner machanisms will be replaced.
Transport Canada3 de mar. de 19931993026Anos-modelo 1993Exibido no inglês original · tradução pendenteVer detalhes →
Certain vehicles do not comply with CMVSS 208 - Seatbelt Installations. Front door shoulder belt guide loops may not provide front seat occupants with proper protection in the event of a crash. Correction: Dealers will inspect the front door shoulder belt guide loops for possible cracks. If a cracked guide loop is found, both front door guide loops will have reinforcing plates installed.
Transport Canada9 de jan. de 19921992002Anos-modelo 1991Exibido no inglês original · tradução pendenteVer detalhes →
On certain vehicles, the front shoulder seat belt webbing may separate at the seat belt upper guide loops (driver and/or passenger side). Separation of the webbing would occur without prior warning and could increase the risk of injury to belted front outboard occupants in the event of a crash. Correction: Dealers will install a controlled rotation bracket on both the driver and passenger side front seat shoulder belt guide loops to prevent this condition from occuring.
Transport Canada12 de fev. de 19911991022Anos-modelo 1991Exibido no inglês original · tradução pendenteVer detalhes →
Certain vehicles do not comply with CMVSS 210 - Seatbelt Assembly Anchorages. Anchor bolt may pull through the upper anchorage plate. Correction: Nut assembly with a larger diameter flanged nut will be installed in place of the existing nut assembly.
Transport Canada15 de mar. de 19901990044Anos-modelo 1988–1990Exibido no inglês original · tradução pendenteVer detalhes →
Certain vehicles equipped with hatchroof option may not comply with CMVSS 210 - Seatbelt Assembly Anchorages. Drivers side shoulder belt anchor plate may be located upside down which can result in the anchor bolt pulling loose in an accident.
Transport Canada16 de jul. de 19861986077Anos-modelo 1986Exibido no inglês original · tradução pendenteVer detalhes →
On certain vehicles, the heads of the rear seatbelt anchor bolts may break off during normal vehicle use and in the event of an accident in which the rear seatbelts are in use, the probability of injury to the wearer will be increased.
Transport Canada11 de jan. de 19851985008Anos-modelo 1980Exibido no inglês original · tradução pendenteVer detalhes →
Some vehicles have bucket seat back locks that do not conform to federal motor vehicle safety standard 207, anchorage of seats. In event of a crash, the seat back lock may not function.
NHTSA · Estados Unidos6 de fev. de 198484V011000Anos-modelo 1984Exibido no inglês original · tradução pendenteVer detalhes →
Owners manuals did not fully explain how front shoulder belt comfort feature works.
NHTSA · Estados Unidos6 de jun. de 199090V112000Anos-modelo 1990Exibido no inglês original · tradução pendenteVer detalhes →
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).