Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

GMCGMC Envoy

1998–2009 · 2 gerações · 27 defeitos documentados · 1 mercados
Gerações

Os boletins técnicos (TSB) são instruções de reparação que os fabricantes enviam aos concessionários sobre problemas conhecidos. Não são recalls de segurança, mas muitas vezes confirmam um defeito.

Ano do modelo
MercadoTodosNA
Envoy II · 2002–2009
BoletimModeradoElétricaNA

Boletim

Esta comunicação de Informação Preliminar fornece ao técnico informações sobre veículos com um problema intermitente de não girar o motor, não dar partida ou falha na partida (start stall), com a luz de segurança acesa. O técnico pode encontrar os Códigos de Diagnóstico de Falha B3055, B3

NHTSA · boletim do fabricante11039894Anos-modelo 2007Traduzido automaticamente · original: inglêsVer detalhes →
Envoy II · 2002–2009
BoletimModeradoElétricaNA

Boletim

Esta comunicação de Informações Preliminares fornece ao técnico informações sobre veículos que apresentam um problema intermitente de não dar partida, não pegar motor ou morrer ao pegar, com a luz de segurança acesa. O técnico pode encontrar os Códigos de Diagnóstico de Falha B3055, B3060, B3935, C0750, C0755, C0760, C0765 e/ou C0775.

NHTSA · boletim do fabricante11021792Anos-modelo 2007Traduzido automaticamente · original: inglêsVer detalhes →
Envoy II · 2002–2009
BoletimModeradoElétricaNA

Boletim

This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines.

NHTSA · boletim do fabricante10232136Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
Envoy II · 2002–2009
BoletimModeradoElétricaNA

Boletim

This bulletin provides information on tools available to find an intake vacuum leak or exhaust leak to correct a condition of MIL Illuminated with Multiple Fuel Trim and/or Oxygen Sensor Codes Set.

NHTSA · boletim do fabricante10219266Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
Envoy II · 2002–2009
BoletimModeradoElétricaNA

Boletim

This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines.

NHTSA · boletim do fabricante10200151Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
Envoy II · 2002–2009
BoletimModeradoElétricaNA

Boletim

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0442. Technician will need to review Techlink article from May 2013 titled "Using the Evaporative Emissions System Tester" Technician will need to follow these steps to help diagnose the issue. First after the P0442 has been verified do not disturb any of the fuel system components. The technician now can use the scan tool to close the Evaporative Emissions System. If possible change the tank pressure sensor units from inch_H2O to milimeter_Hg for better resolution. Now the vehicle can be stared to monitor the tank pressure sensor output value for approximately two minutes. If the tank pressure sensor value does change, pressurize the fuel tank side of the purge solenoid with the GE 41413-A / J 41413-A and the necessary adaptors. Now add smoke and allow pressure to stabilize for 2 minutes. If smoke is allowed to pass through the purge solenoid, replace the purge solenoid. If the tank pressure sensor value does not change, then install CH-48096 adaptor between the purge line from the canister and the purge solenoid. With the Evaporative Emissions System closed, pressurize the system through the CH-48096 adaptor and allow the system to completely stabilize, by observing the Press / Vac Gauge for a minimum of 5 minutes. Now add smoke to the system with GE 41413-A / J 41413-A after system stabilization. Now inspect the purge solenoid, engine side, fuel cap, canister vent solenoid filter and any line quick connects. When the leak is unable to be located, test under a vacuum condition. his type of leak may be detected by using the scan tool Purge/Seal function to create a vacuum in the Evaporative Emissions System and then observe the FTP sensor parameter for vacuum decay.

NHTSA · boletim do fabricante10114954Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
Envoy II · 2002–2009
BoletimModeradoElétricaNA

Boletim

This Preliminary Information communication provides information to the technician about vehicles that have a Malfunction Indicator Lamp on or engine misfire, rough idle, extended crank, or crank no start in some cases. Technician will need to perform published Service Information diagnostics. If technician finds carbon an upper engine and valve cleaning should be performed.

NHTSA · boletim do fabricante10114746Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
Envoy II · 2002–2009
BoletimModeradoElétricaNA

Boletim

This Preliminary Information communication provides information to the technician that some vehicles may have a Service Engine Soon lamp, engine misfire on cylinder 1, 4, 6, or 7 and/or tick noise. Technician will follow service information diagnosis first. If service information diagnosis does not isolate the cause of this concern perform a cylinder deactivation active fuel management system compression test in service information. If the running compression of the misfiring cylinder stays below 25 Pounds per Square Inch regardless of the active fuel management solenoid being commanded on or off, an active fuel management lifter is mechanically collapsed/stuck or unlocking as soon as the engine is started. Replace all active fuel management lifters, and all plastic lifter guides. Also perform the cylinder deactivation active fuel management Valve Lifter Oil Manifold Diagnosis and Testing in Service Information. If it isolates a concern with the Valve Lifter Oil Manifold, replace it and reevaluate the concern. The active fuel management lifters can also be monitored for proper operation by carefully inspecting the cylinder 1, 4, 6, and 7 rockers and valves while cranking or briefly and safely running the engine with the valve covers removed. If the valve or valves of an active fuel management cylinder stop moving while doing this test, the active fuel management lifter is causing the concern. For 2008-2009 Full Size Truck/SUV or a 2007-2009 Chevrolet Tahoe with the Police Package reprogram the Engine Control Module. On the 2008-2009 Pontiac G8, 2010-2011 Camaro, and 2007-2010 Full Size Trucks with active fuel management, also determine if the active fuel management pressure relief valve shield that is listed in the latest version of 10-06-01-008 has ever been installed. On passenger cars with the LS4 engine, determine if the updated oil pan gasket that is listed in the latest version of 11-06-01-007 has been installed.

NHTSA · boletim do fabricante10114354Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
Envoy II · 2002–2009
BoletimModeradoElétricaNA

Boletim

10054E - Special Coverage (customer co-pay discontinued). The contacts on the fuel level sensor may wear prematurely. This wear could cause the fuel gauge to read empty after filling the tank and cause the malfunction indicator light (MIL) to illuminate. As the fuel level in the tank drops, the MIL may turn off and the gauge may display a reading; however, the reading may indicate a slightly higher level of fuel than what is in the tank. Eventually, as the contacts continue to wear, the fuel gauge will stop working and the MIL will illuminate continuously. If the condition occurs within the stated terms, dealers will install a new design fuel level sensor.

NHTSA · boletim do fabricante10114183Anos-modelo 2005–2006Exibido no inglês original · tradução pendenteVer detalhes →
Envoy II · 2002–2009
BoletimModeradoElétricaNA

Boletim

This Preliminary Information communication provides information to the technician about vehicles that have a Malfunction Indicator Lamp on or engine misfire, rough idle, extended crank, or crank no start in some cases. Technician will need to perform published Service Information diagnostics. If technician finds carbon, an upper engine and valve cleaning should be performed. Update added part numbers for the cleaner and model years.

NHTSA · boletim do fabricante10113418Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
Envoy II · 2002–2009
BoletimModeradoElétricaNA

Boletim

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on, engine misfire, and/or engine noise. Technician may find Diagnostic Trouble Codes P0300-P0308. If published Service Information diagnostics does not isolate the cause of this concern technician should check for a worn camshaft lobe and/or lifter roller, a sticking valve, valve leakage, a broken valve spring, and a collapsed active fuel management lifter.

NHTSA · boletim do fabricante10113177Anos-modelo 2004Exibido no inglês original · tradução pendenteVer detalhes →
Envoy II · 2002–2009
BoletimModeradoElétricaNA

Boletim

This Preliminary Information communication provides information to the technician that some vehicles may have a Service Engine Soon lamp, engine misfire on cylinder 1, 4, 6, or 7 and/or tick noise. Technician will follow service information diagnosis first. If service information diagnosis does not isolate the cause of this concern perform a cylinder deactivation active fuel management system compression test in service information. If the running compression of the misfiring cylinder stays below 25 Pounds per Square Inch regardless of the active fuel management solenoid being commanded on or off, an active fuel management lifter is mechanically collapsed/stuck or unlocking as soon as the engine is started. Replace all active fuel management lifters, and all plastic lifter guides. Also perform the cylinder deactivation active fuel management Valve Lifter Oil Manifold Diagnosis and Testing in Service Information. If it isolates a concern with the Valve Lifter Oil Manifold, replace it and reevaluate the concern. The active fuel management lifters can also be monitored for proper operation by carefully inspecting the cylinder 1, 4, 6, and 7 rockers and valves while cranking or briefly and safely running the engine with the valve covers removed. If the valve or valves of an active fuel management cylinder stop moving while doing this test, the active fuel management lifter is causing the concern. For 2008-2009 Full Size Truck/SUV or a 2007-2009 Chevrolet Tahoe with the Police Package reprogram the Engine Control Module. On the 2008-2009 Pontiac G8, 2010-2011 Camaro, and 2007-2010 Full Size Trucks with active fuel management, also determine if the active fuel management pressure relief valve shield that is listed in the latest version of 10-06-01-008 has ever been installed. On passenger cars with the LS4 engine, determine if the updated oil pan gasket that is listed in the latest version of 11-06-01-007 has been installed.

NHTSA · boletim do fabricante10113120Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
Envoy II · 2002–2009
BoletimModeradoElétricaNA

Boletim

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on, engine misfire, and/or engine noise. Technician may find Diagnostic Trouble Codes P0300-P0308. If published Service Information diagnostics does not isolate the cause of this concern technician should check for a worn camshaft lobe and/or lifter roller, a sticking valve, valve leakage, a broken valve spring, and a collapsed active fuel management lifter.

NHTSA · boletim do fabricante10112697Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
Envoy II · 2002–2009
BoletimModeradoElétricaNA

Boletim

This Preliminary Information communication provides information to the technician that some vehicles may have a Service Engine Soon lamp, engine misfire on cylinder 1, 4, 6, or 7 and/or tick noise. Technician will follow service information diagnosis first. If service information diagnosis does not isolate the cause of this concern perform a cylinder deactivation active fuel management system compression test in service information. If the running compression of the misfiring cylinder stays below 25 Pounds per Square Inch regardless of the active fuel management solenoid being commanded on or off, an active fuel management lifter is mechanically collapsed/stuck or unlocking as soon as the engine is started. Replace all active fuel management lifters, and all plastic lifter guides. Also perform the cylinder deactivation active fuel management Valve Lifter Oil Manifold Diagnosis and Testing in Service Information. If it isolates a concern with the Valve Lifter Oil Manifold, replace it and reevaluate the concern. The active fuel management lifters can also be monitored for proper operation by carefully inspecting the cylinder 1, 4, 6, and 7 rockers and valves while cranking or briefly and safely running the engine with the valve covers removed. If the valve or valves of an active fuel management cylinder stop moving while doing this test, the active fuel management lifter is causing the concern. For 2008-2009 Full Size Truck/SUV or a 2007-2009 Chevrolet Tahoe with the Police Package reprogram the Engine Control Module. On the 2008-2009 Pontiac G8, 2010-2011 Camaro, and 2007-2010 Full Size Trucks with active fuel management, also determine if the active fuel management pressure relief valve shield that is listed in the latest version of 10-06-01-008 has ever been installed. On passenger cars with the LS4 engine, determine if the updated oil pan gasket that is listed in the latest version of 11-06-01-007 has been installed.

NHTSA · boletim do fabricante10112436Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
Envoy II · 2002–2009
BoletimModeradoElétricaNA

Boletim

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0442. Technician will need to review Techlink article from May 2013 titled "Using the Evaporative Emissions System Tester" Technician will need to follow these steps to help diagnose the issue. First after the P0442 has been verified do not disturb any of the fuel system components. The technician now can use the scan tool to close the Evaporative Emissions System. If possible change the tank pressure sensor units from inch_H2O to milimeter_Hg for better resolution. Now the vehicle can be stared to monitor the tank pressure sensor output value for approximately two minutes. If the tank pressure sensor value does change, pressurize the fuel tank side of the purge solenoid with the GE 41413-A / J 41413-A and the necessary adaptors. Now add smoke and allow pressure to stabilize for 2 minutes. If smoke is allowed to pass through the purge solenoid, replace the purge solenoid. If the tank pressure sensor value does not change, then install CH-48096 adaptor between the purge line from the canister and the purge solenoid. With the Evaporative Emissions System closed, pressurize the system through the CH-48096 adaptor and allow the system to completely stabilize, by observing the Press / Vac Gauge for a minimum of 5 minutes. Now add smoke to the system with GE 41413-A / J 41413-A after system stabilization. Now inspect the purge solenoid, engine side, fuel cap, canister vent solenoid filter and any line quick connects. When the leak is unable to be located, test under a vacuum condition. his type of leak may be detected by using the scan tool Purge/Seal function to create a vacuum in the Evaporative Emissions System and then observe the FTP sensor parameter for vacuum decay.

NHTSA · boletim do fabricante10111927Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
Envoy II · 2002–2009
BoletimModeradoElétricaNA

Boletim

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on, engine misfire, and/or engine noise. Technician may find Diagnostic Trouble Codes P0300-P0308. If published Service Information diagnostics does not isolate the cause of this concern technician should check for a worn camshaft lobe and/or lifter roller, a sticking valve, valve leakage, a broken valve spring, and a collapsed active fuel management lifter.

NHTSA · boletim do fabricante10111737Anos-modelo 2004Exibido no inglês original · tradução pendenteVer detalhes →
Envoy II · 2002–2009
BoletimModeradoElétricaNA

Boletim

Diagnostic information on engine oil leak from rear of crankshaft. *tt 05-06-01*022 supplement - crankshaft oil leak repair instrumentions. *tt

NHTSA · boletim do fabricante10017385Anos-modelo 2005Exibido no inglês original · tradução pendenteVer detalhes →
Envoy II · 2002–2009
BoletimModeradoElétricaNA

Boletim

Service engine soon light due a diagnostic trouble code p0606 diagnostic trouble code, operate in reduced engine power mode, and potentially stall. *tt

NHTSA · boletim do fabricante10017230Anos-modelo 2004Exibido no inglês original · tradução pendenteVer detalhes →
Envoy II · 2002–2009
BoletimModeradoElétricaNA

Boletim

Concerns with no start, turn/hazard, interior lamps, driver information center (dic), radio, theft alarm, wipers, cruise, shift interlock, horn and/or key in signal inoperative. *tt

NHTSA · boletim do fabricante628833Anos-modelo 2002Exibido no inglês original · tradução pendenteVer detalhes →
Envoy II · 2002–2009
BoletimLeveElétricaNA

Boletim

Este boletim de serviço fornece informações sobre alguns veículos que podem balançar ou se mover ligeiramente para frente ou para trás enquanto estão em Park (Estacionamento) na partida após um longo período de resfriamento (cold soak). Essa condição pode ser acompanhada por um ruído de batida metálica (clunk). Trata-se de um movimento leve, que é mais frequentemente percebido visualmente do que sentido, quando observado de fora do veículo e ao usar o recurso de partida automática, se equipado.

NHTSA · boletim do fabricante11009088Anos-modelo 2007Traduzido automaticamente · original: inglêsVer detalhes →
Envoy II · 2002–2009
BoletimLeveElétricaNA

Boletim

Programação Geral do Veículo (VWP) é um novo processo para atualizar o software dos veículos GM. Ele oferece a possibilidade, por meio de uma única seleção no Techline Connect, de primeiro identificar quais módulos precisam de atualização e, em seguida, prosseguir com a atualização dos módulos afetados (com algumas exceções). A atualização dos módulos é feita em paralelo, em vez de o técnico precisar atualizar um módulo por vez. Isso permite uma abordagem mais simplificada para concessionárias e clientes.

NHTSA · boletim do fabricante11006621Anos-modelo 2006Traduzido automaticamente · original: inglêsVer detalhes →
Envoy II · 2002–2009
BoletimLeveElétricaNA

Boletim

Este boletim fornece informações sobre reparos de aterramento elétrico utilizando novos fixadores de reposição General Motors com acabamento condutor.

NHTSA · boletim do fabricante10252735Anos-modelo 2006Traduzido automaticamente · original: inglêsVer detalhes →
Envoy II · 2002–2009
BoletimLeveElétricaNA

Boletim

This informational bulletin provides information for dealers/technicians on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage.

NHTSA · boletim do fabricante10249011Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
Envoy II · 2002–2009
BoletimLeveElétricaNA

Boletim

Programming And Activation Of Replacement OnStar Modules.

NHTSA · boletim do fabricante10246951Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
Envoy II · 2002–2009
BoletimLeveElétricaNA

Boletim

This service bulletin provides information on some vehicles that may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.

NHTSA · boletim do fabricante10237387Anos-modelo 2007Exibido no inglês original · tradução pendenteVer detalhes →
Mais antigos →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).