Os boletins técnicos (TSB) são instruções de reparação que os fabricantes enviam aos concessionários sobre problemas conhecidos. Não são recalls de segurança, mas muitas vezes confirmam um defeito.
DL: On December 20, 2022, a settlement of claims for certain low pressure fuel pumps was approved by the federal court. The settlement includes Lexus?s agreement to provide a Customer Support Program for certain 2013-2020 model year (MY) vehicles originally equipped with low pressure fuel pumps repaired under Safety Recall 20LA01 or Special Service Campaign 21LC01. The purpose of this Customer Support Program letter is to help clarify how to administer this coverage in accordance with the settlement.
NHTSA · boletim do fabricante10235219Anos-modelo 2017Exibido no inglês original · tradução pendenteVer detalhes →
TSB: Some 2013 ? 2020 model year Lexus vehicles may exhibit a hard start and/or MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs): ?DTC P0171 and/or P0174 (System Too Lean Bank 1/Bank 2) ?DTC P0087 Fuel Rail / System Pressure ? Too Low Techstream data list analysis may reveal positive fuel trims including a no pressure condition verified by a manual fuel pressure gauge. Follow the Repair Procedure in this bulletin to address these conditions.
NHTSA · boletim do fabricante10235215Anos-modelo 2017Exibido no inglês original · tradução pendenteVer detalhes →
This is to advise of various price adjustments affecting Genuine Lexus Motor Oil and Long-Life Coolant, effective March 1, 2023. These products are ordered through the Lexus Complete Maintenance Care (LCMC) website.
NHTSA · boletim do fabricante10234301Exibido no inglês original · tradução pendenteVer detalhes →
DP: The subject vehicles may have been equipped with an engine containing an incorrectly manufactured Crankcase Case Vent. If the engine is equipped with an incorrectly manufactured Crankcase Case Vent, the vehicle may release crankcase emissions.
NHTSA · boletim do fabricante10224163Anos-modelo 2022Exibido no inglês original · tradução pendenteVer detalhes →
TT: Some IS250 and GS300 vehicles may exhibit one or more of the following conditions: ? MIL ?ON? DTC P0300, P0301, P0302, P0303, P0304, P0305, and/or P0306. ? Intermittently runs rough after coming to a stop with the engine at operating temperature. ? Intermittently runs rough with engine misfires present after a cold soak startup. NOTE: The recommendations in this document apply to an intermittent misfire concern. If a vehicle exhibits a steady misfire, the root cause is not related to the referenced service bulletins and the repair manual should be referenced for diagnosis.
NHTSA · boletim do fabricante10152274Anos-modelo 2010Exibido no inglês original · tradução pendenteVer detalhes →
TT: TMS has discovered the current engine active test ?Control the Injection Mode? is not operating as desired when controlling the direct injectors manually on 2GR-FKS or 8AR-FTS engines. When direct injection is started and then stopped using the active test, current ECU logic does not turn off the direct injectors and can cause DTCs P017200, P017500 and P0160300. In order to avoid this condition, technicians should raise engine RPM when changing from Direct Injection active test to Port Injection active test. Use the recommended procedure below to avoid this concern while testing injection mode of 2GR-FKS or 8AR-FTS equipped vehicles. NOTE: If the active test is used multiple times without using this procedure to raise engine RPM, it may be necessary to reset learning values for fuel trim and Air to Fuel ratio before returning vehicle to customer.
NHTSA · boletim do fabricante10152276Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
Some IS250 and GS300 vehicles may exhibit one or more of the following conditions: MIL "ON" DTC P0300, P0301, P0302, P0303, P0304, P0305, and or P0306. Intermittently runs rough after coming to a stop with the engine at operating temperature. intermittently runs rough with engine misfires present after a cold soak startup.
NHTSA · boletim do fabricante10132274Anos-modelo 2010Exibido no inglês original · tradução pendenteVer detalhes →
Some IS250 and GS300 vehicles may exhibit one or more of the following conditions: MIL ?ON? DTC P0300, P0301, P0302, P0303, P0304, P0305, and/or P0306 Intermittently runs rough after coming to a stop with the engine at operating temperature Intermittently runs rough with engine misfires present after a cold soak startup
NHTSA · boletim do fabricante10132188Anos-modelo 2010Exibido no inglês original · tradução pendenteVer detalhes →
Tech Tip: Some IS250 and GS300 vehicles may exhibit one or more of the following conditions: MIL "ON" DTC P0300, P0301, P0302, P0303, P0304, P0305, and/or P0306. Intermittently runs rough after coming to a stop with the engine at operating temperature. Intermittently runs rough with engine misfires present after a cold soak startup. NOTE: The recommendations in this document apply to an intermittent misfire concern. If a vehicle exhibits a steady misfire, the root cause is not related to the referenced service bulletins and the repair manual should be referenced for diagnosis.
NHTSA · boletim do fabricante10109510Anos-modelo 2010Exibido no inglês original · tradução pendenteVer detalhes →
"tt: Tms has discovered the current engine active test control the injection mode is not operating as desired when controlling the direct injectors manually on 2gr-fks or 8ar-fts engines. When direct injection is started and then stopped using the active test, current ecu logic does not turn off the direct injectors and can cause dtcs p017200, p017500 and p0160300. In order to avoid this condition, technicians should raise engine rpm when changing from direct injection active test to port injection active test. Use the recommended procedure below to avoid this concern while testing injection mode of 2gr-fks or 8ar-fts equipped vehicles. Note: If the active test is used multiple times without using this procedure to raise engine rpm, it may be necessary to reset learning values for fuel trim and air to fuel ratio before returning vehicle to customer."
NHTSA · boletim do fabricante10093695Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
"tt: Some is250 and gs300 vehicles may exhibit one or more of the following conditions: Mil on dtc p0300, p0301, p0302, p0303, p0304, p0305, and/or p0306. Intermittently runs rough after coming to a stop with the engine at operating temperature. Intermittently runs rough with engine misfires present after a cold soak startup. Note: The recommendations in this document apply to an intermittent misfire concern. If a vehicle exhibits a steady misfire, the root cause is not related to the referenced service bulletins and the repair manual should be referenced for diagnosis."
NHTSA · boletim do fabricante10093692Anos-modelo 2010Exibido no inglês original · tradução pendenteVer detalhes →
Lexus: Some vehicles may exhibit a mil on condition with one or more of the following diagnostic trouble codes (dtcs): P0300, p0301, p0302, p0303, p0304, p0305, and p0306-random misfire detected; cylinder 1-6 misfire detected. This condition is not not dependent on engine temperature or initial engine run time. *pe
NHTSA · boletim do fabricante10033784Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
Throttle response and downshift quality improvements. *tt
NHTSA · boletim do fabricante10000417Anos-modelo 2001Exibido no inglês original · tradução pendenteVer detalhes →
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).