Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

Mazda CX-3

2014– · 1 gerações · 13 defeitos documentados · 3 mercados
Gerações
Todas as geraçõesCX-32014–1330207

Os boletins técnicos (TSB) são instruções de reparação que os fabricantes enviam aos concessionários sobre problemas conhecidos. Não são recalls de segurança, mas muitas vezes confirmam um defeito.

Ano do modelo
MercadoTodosNA
BoletimModeradoMotorNA

Boletim

If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine may fail prematurely.Metallic debris from the old engine (with catastrophic internal mechanical failure) may rest inside the intake manifold. When the new engine assembly is installed, debris in the intake manifold will be ingested into the new engine and cause internal damage.Clean the intake manifold internally to remove any debris from old engine before installing the new replacement engine assembly.If the intake manifold cannot be properly cleaned internally, replace it.

NHTSA · boletim do fabricante10092724Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoMotorNA

Boletim

If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine may fail prematurely.Metallic debris from the old engine (with catastrophic internal mechanical failure) may rest inside the intake manifold. When the new engine assembly is installed, debris in the intake manifold will be ingested into the new engine and cause internal damage.Clean the intake manifold internally to remove any debris from old engine before installing the new replacement engine assembly.If the intake manifold cannot be properly cleaned internally, replace it

NHTSA · boletim do fabricante10085289Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

A tapping/rattling noise may be noticed from the valve train area. This operating condition can occur on new vehicles which have been delivered to Mazda dealers (due to loading and unloading from transport trucks or customers moving their vehicles in and out of their garages to wash the vehicle, etc.). This condition may also occur if the engine is not allowed to warm up after multiple cold starts.

NHTSA · boletim do fabricante11020037Anos-modelo 2021Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

A tapping/rattling noise may be noticed from the valve train area. This operating condition can occur on new vehicles which have been delivered to Mazda dealers (due to loading and unloading from transport trucks or customers moving their vehicles in and out of their garages to wash the vehicle, etc.). This condition may also occur if the engine is not allowed to warm up after multiple cold starts.

NHTSA · boletim do fabricante10254186Anos-modelo 2021Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

A tapping/rattling noise may be noticed from the valve train area. This operating condition can occur on new vehicles which have been delivered to Mazda dealers (due to loading and unloading from transport trucks or customers moving their vehicles in and out of their garages to wash the vehicle, etc.). This condition may also occur if the engine is not allowed to warm up after multiple cold starts.

NHTSA · boletim do fabricante10235702Anos-modelo 2021Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Engine Oil seepage from engine oil pressure switch

NHTSA · boletim do fabricante10213378Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

A tapping/rattling noise may be noticed from the valve train area. This operating condition can occur on new vehicles which have been delivered to Mazda dealers (due to loading and unloading from transport trucks or customers moving their vehicles in and out of their garages to wash the vehicle, etc.). This condition may also occur if the engine is not allowed to warm up after multiple cold starts.

NHTSA · boletim do fabricante10210884Anos-modelo 2021Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Some customer using Flexible setting for Oil Change in the maintenance monitor may notice that the oil change due notification will not work due to improper control logic of the PCM. The PCM clears the TRAVELED DISTANCE at the wrong time while the ELAPSED DAYS and the DETERIORATION DETERMINATION work as designed. To correct this issue, the control logic of the PCM has been changed.

NHTSA · boletim do fabricante10159194Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Some customer using "Flexible" setting for Oil Change in the maintenance monitor may notice that the oil change due notification will not work due to improper control logic of the PCM. The PCM clears the TRAVELED DISTANCE at the wrong time while the ELAPSED DAYS and the DETERIORATION DETERMINATION work as designed. To correct this issue, the control logic of the PCM has been changed.

NHTSA · boletim do fabricante10154448Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Some customers may complain about the Panic Alarm system activating while driving with the following results: The alarm stops when cycling the ignition OFF and then back ON. No DTCs are stored. Contact Hotline for the latest repair information.

NHTSA · boletim do fabricante10145256Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Frequent engine starts under extremely cold ambient temperatures may result in oil seepage from the engine oil pressure switch. This concern may be caused by a lack of durability of the oil pressure switch under these conditions. To correct the problem, the oil pressure switch has been improved to increase the durability in cold ambient temperatures.

NHTSA · boletim do fabricante10105644Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Frequent engine starts under extremely cold ambient temperatures may result in oil seepage from the engine oil pressure switch. This concern may be caused by a lack of durability of the oil pressure switch under these conditions. To correct the problem, the oil pressure switch has been improved to increase the durability in cold ambient temperatures. All skyactiv engines equipped with oil pressure switch part number pe01-18-501a are applicable to this issue.

NHTSA · boletim do fabricante10099420Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Some vehicles may exhibit oil seepage from the rear shock absorber(s) while the vehicle is on a hoist (i.E. During normal maintenance or other service). Check the label on both rear shock absorbers for the lot number (example: Ra5 is the lot number shown in the illustration below). If the lot numbers are within the production range shown in the table below, replace the rear shock absorbers with new ones.

NHTSA · boletim do fabricante10092561Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

The 2016 cx-9 with the skyactiv-g 2.5t engine requires a unique oil filter (py8w-14-302) which is not interchangeable with other skyactiv oil filters. The unique oil filter can be identified with two white bands as shown below.

NHTSA · boletim do fabricante10092237Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Mazda connect shuts down and does not reboot. Some vehicles may experience mazda connect infotainment system shutting down with a few minutes after ignition is turned on, and will not reboot. It will only reboot after ignition is turned off and then turned on again. This is caused by an internal malfunction of the connectivity master unit (cmu) hardware.

NHTSA · boletim do fabricante10076688Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).