Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

Mazda RX-7

1985–2002 · 2 gerações · 8 defeitos documentados · 2 mercados
Gerações
Ano do modelo
MercadoTodosJPNA
RX-7 III · 1991–2002
RecallCríticoMotorNA

Fuel System

Residual engine heat after the engine is turned off may cause premature deterioration of fuel hose elasticity. This may lead to a reduction in the seating performance of the fuel hoses. In addition, removing and reinstalling the deteriorated fuel hoses may cause fuel seepage which could possibly result in an engine compartment fire. Correction: Fuel hoses will be replaced with modified hoses.

Transport Canada7 de abr. de 19951995067Anos-modelo 1993–1995Exibido no inglês original · tradução pendenteVer detalhes →
RX-7 III · 1991–2002
RecallCríticoMotorNA

Fuel system, gasoline:Delivery:Hoses, lines/piping, and fittings

Residual engine heat can cause premature deterioration of the fuel hose causing the hose to leak. Also, removing and reinstalling the deteriorated fuel hoses increases the likelihood of a leak.

NHTSA · Estados Unidos30 de mar. de 199595V069000Anos-modelo 1993–1994Exibido no inglês original · tradução pendenteVer detalhes →
RX-7 III · 1991–2002
RecallCríticoMotorNA

Engine

The pressure at which the radiator cap pressure relief valve releases the build up of cooling system pressure is set too high. This can result in excessive coolant temperature and cooling system leaks. Leaking coolant mixture can collect on the top of the engine, where some of the water can evaporate, increasing the concentration of the coolant. If the coolant then leaks onto the exhaust manifold, an engine fire can result. Correction: Vehicles will be inspected and the radiator cap and the filler cap body will be replaced. Vehicles exhibiting leakage sufficient to trigger the coolant level warning system will have the following components replaced: Water pump bearing housing, water level sensor and upper radiator hose, thermostat gasket, and all water hoses located above the engine.

Transport Canada19 de mai. de 19941994092Anos-modelo 1993–1994Exibido no inglês original · tradução pendenteVer detalhes →
RX-7 III · 1991–2002
RecallCríticoMotorNA

Engine and engine cooling:Cooling system

The radiator cap pressure relief valve release pressure is set too high. This can cause the coolant to reach temperatures that exceed the thermal design limits of some components of the coolant system. Should this occur, engine coolant can leak collect on top of the engine.

NHTSA · Estados Unidos11 de mai. de 199494V094000Anos-modelo 1993–1994Exibido no inglês original · tradução pendenteVer detalhes →
RX-7 II · 1985–1991
RecallModeradoMotorNA

Emissões

Estes veículos não estão em conformidade com a norma C.M.V.S.S. 1105 – emissões evaporativas. Roteamento incorreto da mangueira de purga.

Transport Canada26 de out. de 19871987115Anos-modelo 1986Traduzido automaticamente · original: inglêsVer detalhes →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).