Complaint Check engine light on. One of the below fault codes is current in the engine control module (N3/10). P04DB29, P04DB31, P04DB79 Cause Open circuit or high resistance to crankcase vent line contact Remedy 1. Check the electrical connector for the relevant vent line contact switch noted below. Refer to attached photos of connection locations. 2. Ensure the bolted connection is secure and bolt can be torqued (9Nm). 3. Check continuity from vent line connection to ME control unit. Repair wire if damage is found. The circuit from ME provides 5V and is pulled to 0V when the ground connection is intact. M260 P04DB31- S88/15 P04DB79- S88/16 M264 P04DB31- S88/15 P04DB79- S88/16 P04DB29- S88/17 M270/M274 P04DB79- S88/5 Note: This repair is not warrantable if the connection was left loose during previous repair/maintenance.
NANHTSA · boletim do fabricante11008712
Boletins técnicos
Exibido no inglês original · tradução pendente
Abrange: Mercedes-Benz A-Class III (Anos-modelo 2018) · Mercedes-Benz C-Class W205 (Anos-modelo 2018–2020) · Mercedes-Benz CLA-Class I (Anos-modelo 2019) · Mercedes-Benz E-Class V213 (Anos-modelo 2021) · Mercedes-Benz GLC I (Anos-modelo 2019) · Mercedes-Benz GLE-Class GLE (W167/C167) (Anos-modelo 2020) · Mercedes-Benz SLK-Class R172 (Anos-modelo 2016–2017)
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).