Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)
EntrarCriar conta
NANHTSA · boletim do fabricante10223854

Boletins técnicos

Exibido no inglês original · tradução pendente

Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 Nm [21 ft. lbs.].

Abrange: Dodge Avenger sedan (Anos-modelo 2008) · Dodge Caravan IV (Anos-modelo 2007) · Dodge Challenger (Anos-modelo 2008) · Dodge Durango II (Anos-modelo 2007) · Dodge Magnum (2005–2008) (Anos-modelo 2007) · Dodge Neon II (Anos-modelo 2001) · Dodge Nitro (Anos-modelo 2007) · Dodge Ram II (Anos-modelo 1998) · Dodge Ram SRT-10 (Anos-modelo 2006) · Dodge Ram Van III (Anos-modelo 2001) · Dodge SRT-4 (Anos-modelo 2005) · Ram ProMaster III (Anos-modelo 2015–2016)

Aviso oficial ↗

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).