Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

SaabSaab 3

1998–2014 · 3 gerações · 35 defeitos documentados · 2 mercados
Gerações

Os boletins técnicos (TSB) são instruções de reparação que os fabricantes enviam aos concessionários sobre problemas conhecidos. Não são recalls de segurança, mas muitas vezes confirmam um defeito.

Ano do modelo
3 I · 2002–2012
BoletimModeradoElétricaNA

Boletim

This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.

NHTSA · boletim do fabricante10201176Anos-modelo 2009Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimModeradoElétricaNA

Boletim

This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.

NHTSA · boletim do fabricante10178384Anos-modelo 2009Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimModeradoElétricaNA

Boletim

This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.

NHTSA · boletim do fabricante10174861Anos-modelo 2009Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimModeradoElétricaNA

Boletim

No Crank/No Start, Dead Battery Due to Parasitic Drain/Discharge.

NHTSA · boletim do fabricante10254206Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimModeradoElétricaNA

Boletim

No Crank/No Start, Dead Battery Due to Parasitic Drain/Discharge.

NHTSA · boletim do fabricante10254207Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimModeradoElétricaNA

Boletim

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0442. Technician will need to review Techlink article from May 2013 titled "Using the Evaporative Emissions System Tester" Technician will need to follow these steps to help diagnose the issue. First after the P0442 has been verified do not disturb any of the fuel system components. The technician now can use the scan tool to close the Evaporative Emissions System. If possible change the tank pressure sensor units from inch_H2O to milimeter_Hg for better resolution. Now the vehicle can be stared to monitor the tank pressure sensor output value for approximately two minutes. If the tank pressure sensor value does change, pressurize the fuel tank side of the purge solenoid with the GE 41413-A / J 41413-A and the necessary adaptors. Now add smoke and allow pressure to stabilize for 2 minutes. If smoke is allowed to pass through the purge solenoid, replace the purge solenoid. If the tank pressure sensor value does not change, then install CH-48096 adaptor between the purge line from the canister and the purge solenoid. With the Evaporative Emissions System closed, pressurize the system through the CH-48096 adaptor and allow the system to completely stabilize, by observing the Press / Vac Gauge for a minimum of 5 minutes. Now add smoke to the system with GE 41413-A / J 41413-A after system stabilization. Now inspect the purge solenoid, engine side, fuel cap, canister vent solenoid filter and any line quick connects. When the leak is unable to be located, test under a vacuum condition. his type of leak may be detected by using the scan tool Purge/Seal function to create a vacuum in the Evaporative Emissions System and then observe the FTP sensor parameter for vacuum decay.

NHTSA · boletim do fabricante10114954Anos-modelo 2009Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimModeradoElétricaNA

Boletim

This Preliminary Information communication provides information to the technician about vehicles that have a Malfunction Indicator Lamp on or engine misfire, rough idle, extended crank, or crank no start in some cases. Technician will need to perform published Service Information diagnostics. If technician finds carbon an upper engine and valve cleaning should be performed.

NHTSA · boletim do fabricante10114746Anos-modelo 2009Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimModeradoElétricaNA

Boletim

This Preliminary Information communication provides information to the technician about vehicles that have a Malfunction Indicator Lamp on or engine misfire, rough idle, extended crank, or crank no start in some cases. Technician will need to perform published Service Information diagnostics. If technician finds carbon, an upper engine and valve cleaning should be performed. Update added part numbers for the cleaner and model years.

NHTSA · boletim do fabricante10113418Anos-modelo 2009Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimModeradoElétricaNA

Boletim

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0442. Technician will need to review Techlink article from May 2013 titled "Using the Evaporative Emissions System Tester" Technician will need to follow these steps to help diagnose the issue. First after the P0442 has been verified do not disturb any of the fuel system components. The technician now can use the scan tool to close the Evaporative Emissions System. If possible change the tank pressure sensor units from inch_H2O to milimeter_Hg for better resolution. Now the vehicle can be stared to monitor the tank pressure sensor output value for approximately two minutes. If the tank pressure sensor value does change, pressurize the fuel tank side of the purge solenoid with the GE 41413-A / J 41413-A and the necessary adaptors. Now add smoke and allow pressure to stabilize for 2 minutes. If smoke is allowed to pass through the purge solenoid, replace the purge solenoid. If the tank pressure sensor value does not change, then install CH-48096 adaptor between the purge line from the canister and the purge solenoid. With the Evaporative Emissions System closed, pressurize the system through the CH-48096 adaptor and allow the system to completely stabilize, by observing the Press / Vac Gauge for a minimum of 5 minutes. Now add smoke to the system with GE 41413-A / J 41413-A after system stabilization. Now inspect the purge solenoid, engine side, fuel cap, canister vent solenoid filter and any line quick connects. When the leak is unable to be located, test under a vacuum condition. his type of leak may be detected by using the scan tool Purge/Seal function to create a vacuum in the Evaporative Emissions System and then observe the FTP sensor parameter for vacuum decay.

NHTSA · boletim do fabricante10111927Anos-modelo 2009Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimModeradoElétricaNA

Boletim

This preliminary information communication provides information to the technician about vehicles that have a malfunction indicator lamp on or engine misfire, rough idle, extended crank, or crank no start in some cases. Technician will need to perform published service information diagnostics. If technician finds carbon, an upper engine and valve cleaning should be performed.

NHTSA · boletim do fabricante10099252Anos-modelo 2009Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimLeveElétricaNA

Boletim

This warranty administration bulletin provides policy information on the requirements for 12V battery testing and warranty replacements.

NHTSA · boletim do fabricante10253527Anos-modelo 2010Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimLeveElétricaNA

Boletim

This warranty administration bulletin provides policy information on the requirements for 12V battery testing and warranty replacements.

NHTSA · boletim do fabricante10252774Anos-modelo 2010Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimLeveElétricaNA

Boletim

This service bulletin provides information for dealers/technicians on OnStar Module 2G Sunset Information.

NHTSA · boletim do fabricante10230605Anos-modelo 2010Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimLeveElétricaNA

Boletim

This informational bulletin provides information on Some vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.

NHTSA · boletim do fabricante10165123Anos-modelo 2009Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimLeveElétricaNA

Boletim

This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will use Global Diagnostic System 2 to review the Firmware Over-the-Air version. If the Firmware Over-the-Air version on the scan tool equals 6708 the technician will need to contact General Motors Technical Assistance Center for further assistance. If the Firmware Over-the-Air version on the scan tool is lower than 6708 Dealer can order the part thought the Instrument Sales and Service website process.

NHTSA · boletim do fabricante10157041Anos-modelo 2009Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimLeveElétricaNA

Boletim

This informational bulletin provides information to diagnose batteries that have set for a long period of time and/or cold weather climates and testing those batteries.

NHTSA · boletim do fabricante10139282Anos-modelo 2009Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimLeveElétricaNA

Boletim

This informational bulletin provides information on Some vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.

NHTSA · boletim do fabricante10139179Anos-modelo 2009Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimLeveElétricaNA

Boletim

This informational bulletin provides information to diagnose batteries that have set for a long period of time and/or cold weather climates and testing those batteries.

NHTSA · boletim do fabricante10139185Anos-modelo 2009Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimLeveElétricaNA

Boletim

This technical bulletin provides a procedure to clear the codes and re-evaluate the XM radio channels to correct a condition of audio muting when listening to some Sirius XM channels but if they change channels they will find others that experience normal audio. This could be due to interference from transmitting sources outside of Sirius XM?s frequency range.

NHTSA · boletim do fabricante10139099Anos-modelo 2009Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimLeveElétricaNA

Boletim

This informational bulletin provides information on On rare occasions, a security code input message with SPS error code E5659, M5304, and/or M5530 may be displayed in TIS2web when the technician is programming any module. If this concern is encountered, the technician should start by ensuring that the module being programmed is not a used module and that the VIN matches on VIN plate, TIS2web programming screen, and GDS2 module identification information screen.

NHTSA · boletim do fabricante10138054Anos-modelo 2009Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimLeveElétricaNA

Boletim

This technical bulletin provides a procedure to properly reprogram an onstar module to correct a condition of Red LED, No WiFi Operation, and/or Limited OnStar Module Functionality After OnStar Module Replacement for Another Condition.

NHTSA · boletim do fabricante10137375Anos-modelo 2009Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimLeveElétricaNA

Boletim

This informational bulletin provides information on communication with OnStar module after Canadian cellular upgrade.

NHTSA · boletim do fabricante10135369Anos-modelo 2009Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimLeveElétricaNA

Boletim

This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.

NHTSA · boletim do fabricante10135322Anos-modelo 2009Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimLeveElétricaNA

Boletim

This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.

NHTSA · boletim do fabricante10135342Anos-modelo 2009Exibido no inglês original · tradução pendenteVer detalhes →
3 I · 2002–2012
BoletimLeveElétricaNA

Boletim

This informational bulletin provides information on Some vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.

NHTSA · boletim do fabricante10135242Anos-modelo 2009Exibido no inglês original · tradução pendenteVer detalhes →
Mais antigos →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).