Os boletins técnicos (TSB) são instruções de reparação que os fabricantes enviam aos concessionários sobre problemas conhecidos. Não são recalls de segurança, mas muitas vezes confirmam um defeito.
Este boletim anuncia os procedimentos de diagnóstico e a disponibilidade de novos arquivos de reprogramação do Módulo de Controle do Motor (ECM) para tratar a detecção do DTC P2404 (Circuito de Sensor da Bomba de Detecção de Vazamento do Sistema Evap - Faixa/Desempenho). Esta é uma versão revisada do boletim original.
O boletim anuncia os procedimentos de diagnóstico e a disponibilidade de novos arquivos de reprogramação do Módulo de Controle do Motor (ECM) para tratar a detecção do DTC P2404 (Evap System Leak Detection Pump Sense Circuit Range/Performance).
The following information announces reprogramming file availability and provides a software update installation procedure to optimize the new Gen 4.5 Denso CP1.5 Audio and Navigation head units utilized in the models listed.
NHTSA · boletim do fabricante11013519Anos-modelo 2024Exibido no inglês original · tradução pendenteVer detalhes →
The following information announces reprogramming file availability and provides a software update installation procedure to optimize the new Gen 4.5 Denso CP1.5 Audio and Navigation head units utilized in the models listed.
NHTSA · boletim do fabricante11010911Anos-modelo 2024Exibido no inglês original · tradução pendenteVer detalhes →
This bulletin following information announces reprogramming file availability and provides a software update installation procedure to optimize the new Gen 4.5 Denso CP1.5 Audio and Navigation head units utilized in the models listed.
NHTSA · boletim do fabricante11009689Anos-modelo 2024Exibido no inglês original · tradução pendenteVer detalhes →
This bulletin announces reprogramming file availability and provides a software update installation procedure to optimize the new Gen 4.5 Denso CP1.5 Audio and Navigation head units utilized in the models listed.
NHTSA · boletim do fabricante11005620Anos-modelo 2024Exibido no inglês original · tradução pendenteVer detalhes →
This bulletin announces reprogramming file availability and provides a software update installation procedure to optimize the new Gen 4.5 Denso CP1.5 Audio and Navigation head units utilized in the models listed.
NHTSA · boletim do fabricante11002729Anos-modelo 2024Exibido no inglês original · tradução pendenteVer detalhes →
This bulletin the announces diagnostic procedures and availability of new Engine Control Module (ECM) reprogramming files to address DTC P2404 (Evap System Leak Detection Pump Sense Circuit Range/Performance) detection.
NHTSA · boletim do fabricante10253934Anos-modelo 2024Exibido no inglês original · tradução pendenteVer detalhes →
"On December 14th, 2018, the first TomTom map update for Gen 3.1 Harman navigation equipped vehicles was made available. While the map update process is user-friendly, we ask that retailers assist customers with the map update procedure when requested as a courtesy, an opportunity to build retailer loyalty, enhance customer satisfaction and in keeping with the Love Promise. Retailers may also want to install this map update on any certified pre-owned or pre-owned vehicles in their inventory on their own. The site (dealer.subaru-maps.com) which is unique for retailers, is not the same as what customers will be accessing at home. If Service, Sales, and/or Parts Managers do not have a login, create an account from this page. There may be a short delay while retailer approval is pending."
NHTSA · boletim do fabricante10168610Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3.1 Audio and Navigation head units utilized in the models as listed above. The procedure will involve either downloading the software update files from Subarunet (or using those sent directly from Nuspire) and transferring them onto a flash drive for head unit installation.
NHTSA · boletim do fabricante10164194Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3.1 Audio and Navigation head units utilized in the models as listed above. The procedure will involve either downloading the software update files from Subarunet (or using those sent directly from Nuspire) and transferring them onto a flash drive for head unit installation. It is VERY IMPORTANT to read and understand this information completely to understand all changes from prior releases before proceeding.
NHTSA · boletim do fabricante10160501Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3.1 Audio and Navigation head units utilized in the models as listed above. The procedure will involve either downloading the software update files from Subarunet (or using those sent directly from Nuspire) and transferring them onto a flash drive for head unit installation.
NHTSA · boletim do fabricante10154205Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
The rear view camera image may not display properly. More specifically, due to a software problem within the infotainment unit. The remedy procedure will be to reprogram the infotainment unit with a software update. The procedure will involve either downloading the software update files from Subarunet (or using those sent directly from Nuspire) and transferring them onto a flash drive for head unit installation.
NHTSA · boletim do fabricante10150940Anos-modelo 2017Exibido no inglês original · tradução pendenteVer detalhes →
The rear view camera image may not display properly. More specifically, due to a software problem within the infotainment unit. The remedy procedure will be to reprogram the infotainment unit with a software update. The procedure will involve either downloading the software update files from Subarunet (or using those sent directly from Nuspire) and transferring them onto a flash drive for head unit installation.
NHTSA · boletim do fabricante10150915Anos-modelo 2017Exibido no inglês original · tradução pendenteVer detalhes →
This bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed to set and result in the related system?s (e. g. VDC and/or EyeSight) warning lamp to illuminate.
NHTSA · boletim do fabricante10142827Anos-modelo 2017Exibido no inglês original · tradução pendenteVer detalhes →
This bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s (e. g. VDC and/or EyeSight) warning lamp to illuminate.
NHTSA · boletim do fabricante10130273Anos-modelo 2017Exibido no inglês original · tradução pendenteVer detalhes →
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 audio and Navigation head units utilized in the new 2017MY Impreza. The procedure will involve either downloading the software update files from Subarunet (or using those sent directly from Nuspire) and transferring them onto a flash drive for head unit installation. It is VERY IMPORTANT to read and understand this information completely before proceeding.
NHTSA · boletim do fabricante10117557Anos-modelo 2017Exibido no inglês original · tradução pendenteVer detalhes →
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 audio and Navigation head units utilized in the new 2017MY Impreza. The procedure will involve either downloading the software update files from Subarunet (or using those sent directly from Nuspire) and transferring them onto a flash drive for head unit installation. It is VERY IMPORTANT to read and understand this information completely before proceeding.
NHTSA · boletim do fabricante10117537Anos-modelo 2017Exibido no inglês original · tradução pendenteVer detalhes →
"note: The information in this bulletin was originally part of tsb 11-149-14 but has been separated out into this publication to simplify applicability and the corresponding service procedure. This bulletin announces the availability of reprogramming files to optimize the ecm logic for engine oil level detection in the event of false or premature low engine oil level warning lamp illumination. Should a customer present a concern with a low engine oil warning lamp illumination and the diagnosis indicate the oil level is full or nearly full (oil level between the full and add marks/holes on the dipstick) and the customer has not added any engine oil, the ecm must be updated with this new logic. Note: On 5mt models only, the oil level switch must also be replaced. If the customer has added oil, determine how much was added. Based upon the information provided, estimate where the oil level was when the lamp illuminated in order to determine if any additional action is required beyond what is described in this bulletin (e.G an oil consumption test). Reminder: Always confirm any low oil level lamp false illumination is not a result of a poor electrical connection or grounding concern. Inspect the circuit following the diagnosis found in the applicable service manual to ensure no other related concern exists."
NHTSA · boletim do fabricante10093101Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
This bulletin provides information regarding a design change to the rubber cap which covers the electrical connection at the oil pressure switch. The new cap provides better sealing and resistance to moisture intrusion which can compromise the electrical connection and in some cases, cause the oil pressure warning lamp to illuminate in error.
NHTSA · boletim do fabricante10092093Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
The information in this bulletin was originally part of tsb 11-149-14 but has been separated out into this publication to simplify applicability and the corresponding service procedure. This bulletin announces the availability of reprogramming files and a revised oil level switch to optimize the ecm logic for engine oil level detection in the event of false or premature low engine oil level warning lamp illumination. Revised to increase engine oil quantities.
NHTSA · boletim do fabricante10090805Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
This Bulletin provides information regarding a design change to the rubber cap which covers the electrical connection at the oil pressure switch. The new cap provides better sealing and resistance to moisture intrusion which can compromise the electrical connection and in some cases, cause the oil pressure warning lamp to illuminate in error.
NHTSA · boletim do fabricante10141544Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
Subaru: Information provided regarding repair and inspection of camshaft position issues and also, check engine light coming on, extended cranking or no start, rough idle. Conditions may be caused by camshaft position sensor out of specification. Models 2012 and 2013 impreza and xv crosstrek. *pe
NHTSA · boletim do fabricante10050520Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).