Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

Toyota Vitz

1999–2019 · 3 gerações · 53 defeitos documentados · 6 mercados
Gerações
Ano do modelo
Vitz II · 2005–2010Vitz III · 2010–2019
Vitz I · 1999–2004Vitz II · 2005–2010Vitz III · 2010–2019
Vitz I · 1999–2004Vitz II · 2005–2010
Vitz I · 1999–2004
RecallCríticoInteriorEU

The ammonium nitrate propellant used in the airbag inflator may experience a material alteration over time…

The ammonium nitrate propellant used in the airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, it may deploy too slowly or the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.

Safety Gate · UE29 de jan. de 2020A12/00160/20Anos-modelo 1998–1999Exibido no inglês original · tradução pendenteVer detalhes →
Vitz I · 1999–2004
RecallCríticoInteriorJP

Airbag

No inflador do airbag do lado do motorista, a proteção contra umidade é inadequada, e o agente gerador de gás pode absorver umidade. Por isso, se o agente gerador de gás absorver umidade e secar repetidamente durante o uso, existe o risco de o airbag não se abrir normalmente quando for acionado.

MLIT · Japão22 de jan. de 20201146450Anos-modelo 1998–1999Traduzido automaticamente · original: japonêsVer detalhes →
Vitz I · 1999–2004Vitz II · 2005–2010
Vitz I · 1999–2004Vitz II · 2005–2010Vitz III · 2010–2019
RecallCríticoInteriorEU

The ammonium nitrate propellant used in the airbag inflator may degrade over time due to propellant…

The ammonium nitrate propellant used in the airbag inflator may degrade over time due to propellant degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.

Safety Gate · UE3 de set. de 2019A12/1334/19Anos-modelo 2001–2011Exibido no inglês original · tradução pendenteVer detalhes →
Vitz II · 2005–2010Vitz III · 2010–2019
Vitz III · 2010–2019
Vitz III · 2010–2019
Vitz I · 1999–2004Vitz II · 2005–2010
RecallCríticoInteriorEU

The ammonium nitrate propellant used in the air bag inflator may degrade over time due to heat cycles and…

The ammonium nitrate propellant used in the air bag inflator may degrade over time due to heat cycles and exposure to moisture. In the event of the airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the rider.

Safety Gate · UE13 de nov. de 2018A12/1740/18Anos-modelo 2001–2006Exibido no inglês original · tradução pendenteVer detalhes →
Vitz III · 2010–2019
Vitz I · 1999–2004
RecallCríticoInteriorJP

エアバッグ

運転者席用エアバッグのインフレータ(膨張装置)において、ガス発生剤の吸湿温度が不適切なため、温度および湿度変化の繰り返しによりガス発生剤が劣化することがある。このため、エアバッグ展開時にインフレータ容器が破損するおそれがある。

MLIT · Japão30 de mar. de 20171140170Anos-modelo 2002–2004Exibido no japonês original · tradução pendenteVer detalhes →
Vitz III · 2010–2019
Vitz I · 1999–2004Vitz II · 2005–2010Vitz III · 2010–2019
RecallCríticoInteriorJP

Airbag

Nos inflators dos airbags do lado do passageiro, a proteção contra umidade do agente gerador de gás é inadequada; por isso, com as repetidas variações de temperatura e umidade, o agente gerador de gás pode se deteriorar. Consequentemente, há o risco de o recipiente do inflator se romper quando o airbag for acionado.

MLIT · Japão26 de out. de 20161139110Anos-modelo 2000–2011Traduzido automaticamente · original: japonêsVer detalhes →
Vitz III · 2010–2019
RecallCríticoInteriorUK

Rear seat belt may fail

The vehicles are equipped with 3-point lap-shoulder belt assemblies in all-three rear seating positions. The inner belt (buckle portion) of each of the rear three seat belt assemblies is secured to the floor of the vehicle with an anchor plate. The anchor plate might have been manufactured with a sharp edge around the punched portion. In the event of a collision there is a possibility that the inner seat belt webbing could become cut and separate at the anchor plate. If this occurs the inner seat belt may not properly restrain the occupant which could increase the risk to injury.

DVSA · Reino Unido18 de mai. de 2016R/2016/083Anos-modelo 2011–2016Exibido no inglês original · tradução pendenteVer detalhes →
Vitz I · 1999–2004Vitz II · 2005–2010
RecallCríticoInteriorJP

エアバッグ

助手席用一段展開制御式エアバッグのインフレータ(膨張装置)において、エアバッグ展開時にインフレータ容器が破損して飛び散り、出火したり乗員が負傷するおそれがある。

MLIT · Japão25 de nov. de 20151136960Anos-modelo 2004–2008Exibido no japonês original · tradução pendenteVer detalhes →
Vitz II · 2005–2010
RecallCríticoInteriorJP

エアバッグ

助手席用一段展開制御式エアバッグのインフレータ(膨張装置)において、原因は判明していないが、エアバッグ展開時にインフレータ容器が破損するおそれがあることから、全車両予防的措置として、当該インフレータを交換する。

MLIT · Japão25 de jun. de 20151135920Anos-modelo 2007–2008Exibido no japonês original · tradução pendenteVer detalhes →
Vitz I · 1999–2004Vitz II · 2005–2010
RecallCríticoInteriorEU

null The inflator of the driver’s front airbag assembly may have an increased potential for moisture…

null The inflator of the driver’s front airbag assembly may have an increased potential for moisture intrusion over time. This could potentially make the inflator assembly more susceptible to rupture during a crash, resulting in metal fragments injuring the vehicle occupants.

Safety Gate · UE19 de mai. de 2015A12/0661/15Anos-modelo 2003–2005Exibido no inglês original · tradução pendenteVer detalhes →
Vitz I · 1999–2004Vitz II · 2005–2010
RecallCríticoInteriorJP

エアバッグ

運転者席用エアバッグのインフレータ(膨張装置)において、市場回収品を調査した結果、インフレータ容器に気密不良のものがあることを確認した。そのため、長期間使用する過程で大気中の水分がインフレータ内部に浸入し、ガス発生剤が吸湿してエアバッグ展開時に正常に展開しないおそれがある。

MLIT · Japão13 de mai. de 20151135640Anos-modelo 2003–2005Exibido no japonês original · tradução pendenteVer detalhes →
Vitz I · 1999–2004Vitz II · 2005–2010
RecallCríticoInteriorJP

エアバッグ

助手席用一段展開制御式エアバッグのインフレータ(膨張装置)において、市場回収品を調査した結果、インフレータ容器に気密不良のものがあることを確認した。そのため、長期間使用する過程で大気中の水分がインフレータ内部に浸入し、ガス発生剤が吸湿してエアバッグ展開時に正常に展開しないおそれがある。

MLIT · Japão13 de mai. de 20151135630Anos-modelo 2004–2008Exibido no japonês original · tradução pendenteVer detalhes →
Vitz I · 1999–2004
RecallCríticoInteriorEU

null In the event of a collision that results in the deployment of the driver frontal airbag, the inner…

null In the event of a collision that results in the deployment of the driver frontal airbag, the inner pressure of the inflator assembly could increase abnormally and the inflator body could rupture. The ruptured inflator may create metallic projectile fragments that could hit passengers and cause injuries.

Safety Gate · UE2 de dez. de 2014A12/1945/14Anos-modelo 2003Exibido no inglês original · tradução pendenteVer detalhes →
Vitz I · 1999–2004
RecallCríticoInteriorJP

エアバッグ

運転者席用エアバッグのインフレータ(膨張装置)において、インフレータ製造時におけるガス発生剤充填後の吸湿管理が不適切なため、使用過程での外気温等の影響によりガス発生剤が膨張し、密度が低下するものがある。そのため、エアバッグ展開時にインフレータ内圧が異常上昇し、インフレータ容器が破損して飛び散り、乗員が負傷するおそれがある。

MLIT · Japão27 de nov. de 20141134740Anos-modelo 2002–2004Exibido no japonês original · tradução pendenteVer detalhes →
Vitz I · 1999–2004Vitz II · 2005–2010
Vitz II · 2005–2010Vitz III · 2010–2019
RecallCríticoInteriorEU

null The front passenger airbag inflators could have been assembled with improperly manufactured…

null The front passenger airbag inflators could have been assembled with improperly manufactured propellant wafers which could cause the inflator to rupture and the front passenger airbag to deploy abnormally in the event of a crash. This situation could increase the risk of injury to the occupant or lead to a fire in the interior compartment.

Safety Gate · UE19 de abr. de 2013A12/0502/13Anos-modelo 2010–2013Exibido no inglês original · tradução pendenteVer detalhes →
Mais antigos →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).