通报
This bulletin provides information when the fuel tank cap seal is leaking; DTC P044200, P045600 and/ or P00EF00 in stored in the ECM.
🔔 注册免费账户,接收 Audi S6 (所有代) 的邮件提醒
技术服务通报(TSB)是制造商就已知问题发给经销商的维修说明。它们不是安全召回,但常常能证实某个缺陷。
This bulletin provides information when the fuel tank cap seal is leaking; DTC P044200, P045600 and/ or P00EF00 in stored in the ECM.
This bulletin provides information regarding UV leak additive for finding oil leaks.
本通告提供了燃油箱盖密封圈泄漏时的相关信息;ECM(发动机控制模块)中存储有DTC P044200、P045600和/或P00EF00。
This bulleitn provides information regarding UV Leak additive for finding oil leaks.
The oil filter bypass valve on certain 2013 model year Audi 4.0L vehicles may not be present or may have been incorrectly installed during production.
This document contains the notice about an upcoming Service action on the oil filter bypass valve. The oil filter bypass valve may not be present or may have been incorrectly installed during production.
This bulletin provides information when DTC B105A1A, B103E25 is stored in 0017; fuel tank level implausible.
This bulletin provides information when DTC B105A1A, B103E25 is stored in 0017; fuel tank level implausible.
This bulletin provides information when there is increased oil consumption; >0.5ltr/1000 km.
This bulletin provides information when there is increased oil consumption; >0.5ltr/1000 km.
The fuel metering valve of the high-pressure fuel pump is controlled by a specific on/off ratio. If there is a low system voltage, the on/off ratio may not be enough to keep the fuel metering valve constant in all areas. In such a situation, the fuel metering valve is deactivated and the high-pressure fuel pump switches to full supply mode. Because the increased rail pressure does not match the respective driving situation, the DTC appears.
The fuel metering valve of the high-pressure fuel pump is controlled by a specific on/off ratio. If there is a low system voltage, the on/off ratio may not be enough to keep the fuel metering valve constant in all areas. In such a situation, the fuel metering valve is deactivated and the high-pressure fuel pump switches to full supply mode. Because the increased rail pressure does not match the respective driving situation, the DTC appears.
The fuel metering valve of the high-pressure fuel pump is controlled by a specific on/off ratio. If there is a low system voltage, the on/off ratio may not be enough to keep the fuel metering valve constant in all areas. In such a situation, the fuel metering valve is deactivated and the high-pressure fuel pump switches to full supply mode. Because the increased rail pressure does not match the respective driving situation, the DTC appears.
There may be slow coolant loss from the connections of the coolant feed pipe and coolant return pipe. High temperatures cause the coolant to become encrusted on the connection flange of the turbocharger (Figure 1).
A highly sporadic startup timing issue can cause a message "CNG inspection Due! CNG Mode not available. Please contact workshop". This is a normal condition which can be resolved by recycling the ignition and repairs are not needed.
A highly sporadic startup timing issue can cause a message "CNG inspection Due! CNG Mode not available. Please contact workshop". This is a normal condition which can be resolved by recycling the ignition and repairs are not needed.
Poor internal contact area on circuit board will lead to faults. Oil additives can cause the plastic circuit plates to delaminate, causing contact loss.
Oil Capacity Table: Changed Oil Specs for all models
Oil Capacity Table: Changed Oil Specs for all models
Added Oil Capacity Chart at the end of the document.
This bulletin contains repair information for a malfunctioning V50 coolant recirculation pump that prevents the passenger side from heating properly with DTC B10D004 or B11D501.
Added Oil Capacity Chart at the end of the document.
Major Maintenance Section: ADDED: "(except A3 e-tron)" at the end of "Cooling system - Check coolant level, add coolant if necessary, and check protection to spec -25C"
Oil Capacity Table: For A3 B-Cycle 2.0 TFSI engine: Changed oil spec from 508/509** Castrol EDGE Professional 5W40 to 508/509** Castrol EDGE Professional 0W20 Long Life IV
Spark Plugs: replace at 55,000 miles (85,000 km) or 6 years, whichever occurs first. Thereafter, every 60,000 miles (90,000 km) or 6 years, whichever occurs first Added: 2.0L TFSI (Q3) For 35/75/115 Mile Spark Plug interval: Added Q3 to exclusion of Flex Fuel Engines.
来源:NHTSA(美国,公有领域)、加拿大交通部(加拿大开放政府许可)、DVSA(英国,开放政府许可 v3.0)、RappelConso 与欧盟 Safety Gate(法国,开放许可 2.0)、日本国土交通省(公共数据许可1.0)、韩国国土交通部(car.go.kr)。