The wire coil profile used in the radiator tank seal may be deformed due to the very variable temperatures within the engine compartment. Over time, and under unfavourable conditions, this could lead to the radiator seal coming loose. A loose radiator seal could come into contact with hot components in the engine compartment as a result of vibrations during driving. This could lead to the seal and, potentially, neighbouring components starting to smoulder, increasing the risk of fire.
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2013-2016 Audi A8 and S8 vehicles. The fuel supply line for the high pressure fuel pump may become porous and leak fuel.
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2013-2015 Audi S8 and A8 vehicles. The fuel supply line for the high pressure fuel pump may become porous over time, resulting in a fuel leak.
터보차저 오일 스트레이너 매쉬스크린의 설계 오류로 인하여, 터보차저 오일 스트레이너가 엔진 오일 시스템 내부의 침전물에 의하여 막힐 수 있으며, 이런 경우 오일 공급이 불충분하여 터보차저가 손상될 수 있고, 이는 사전 경고없이 출력 저하 또는 엔진 시동 꺼짐 현상이 발생할 수 있는 가능성에 따른 리콜
<*대상차량별 생산일자>
A8 4.0 TFSI LWB qu.:2012.07.17~2014.03.13
A8 60 TFSI LWB qu.:2014.03.13~2015.05.20
A8 65 TFSI LWB qu.:2015.07.01~2016.07.01
A8 65 TFSI qu.:2015.07.13~2016.07.04
RS7 Plus TFSI qu.:2015.12.15~2016.05.23
RS7 TFSI qu.:2013.11.23~2015.10.26
S6 TFSI qu.:2012.07.04~2015.10.05
S7 TFSI qu.:2012.07.10~2015.10.30
S8 4.0 TFSI qu.:2012.06.30~2014.02.12
S8 Plus TFSI qu.:2016.01.29~2016.07.05
S8 TFSI qu.:2014.04.17~2015.09.23
Volkswagen Group of America, Inc. (Audi) is recalling certain 2013-2017 A8, S6 Sedan, S7, S8, and 2014-2017 RS7 vehicles. The turbocharger oil supply strainer can become blocked, causing wear to the bearings due to lack of lubrication.
Moisture may enter into the engine control unit due to a missing sealing pin in one of the connectors.As a result, the engine may run in an emergency mode with reduced power or stall.
The cylinder crankcase could be cracked, which could damage the pistons and consequently they may become jammed.This could lead to an engine failure, increasing the risk of an accident.
특정 기간 동안 생산된 엔진컨트롤유닛 커넥터의 씰링핀(밀봉 기능) 일부가 제조 공정상의 오류로 인하여 조립 누락 가능성이 있으며, 이런 경우 커넥터 내부로 수분이 침투하여 부식이 발생할 수 있으며, 이로인해 엔진 출력이 저하되는 비상운행 모드가 실행되는 오작동으로 이어질 수 있고, 드문 경우이나 차량 정지 혹은 시동꺼짐 등이 발생할 수 있는 가능성에 따른 리콜
특정 기간 동안 생산된 차량 중, 엔진룸 밀봉을 위해 장착된 씰(밀봉고무재)이 엔진룸에서 발생하는 고온으로 인하여 변형될 가능성이 있으며, 이로인해 운행 중의 엔진 진동으로 인하여 고정력이 약화되어, 씰이 느슨해지거나 고정 위치에서 이탈되어 고온 발생 부품과 접촉하게 되는 경우, 씰 혹은 근접한 엔진 부품이 소손될 수 있는 가능성에 따른 리콜
<*대상차량별 생산일자> A8 4.0 TFSI LWB qu.: 2012.07.17~2014.03.13 A8 60 TFSI LWB qu.: 2014.03.13~2015.05.20 A8 65 TFSI LWB qu.: 2015.07.01~2015.10.22 A8 65 TFSI qu.: 2015.07.13~2016.04.08 S8 4.0 TFSI qu.: 2012.06.30~2014.02.12 S8 Plus TFSI qu.: 2016.01.29~2016.04.05 S8 TFSI qu.: 2014.04.17~2015.09.23