免费阅读 · 免费账户即可贡献Anticars(2000)的继任者

BMW M1

1978–1981 · 1 各代车型 · 已记录0项缺陷 · 2个市场
各代车型

技术服务通报(TSB)是制造商就已知问题发给经销商的维修说明。它们不是安全召回,但常常能证实某个缺陷。

严重程度全部中等轻微
车型年份
市场全部NA
通报中等发动机NA

通报

Delivery Stop: 2013 3 Series Emissions Label. A Delivery Stop has been issued by BMW AG to correct the Vehicle Emissions Control Information (VECI) label. Affected are certain 2013 Model Year 3 Series vehicles with xDrive. Vehicles included in the attached chassis number list must not be delivered until the correct VECI label has been installed. Service and parts instructions will be provided as soon as the labels are available for ordering (estimate: 1 week).

NHTSA · 制造商通报10149497以原文(英语)显示 · 翻译待完成查看详情 →
通报中等发动机NA

通报

BMW Parts Bulletin TEC7W Rear Silencer with Exhaust Flap Return BMW AG has requested an inspection of the following part numbers: 18 30 8 604 208, 18 30 8 604 209 Stock should not be sold or installed on any vehicle. All Rear Silencer with a manufacturing date before 22.04.14 (DD.MM.YY) need to be returned. Parts with manufacturing date from 22.04.14 are ok to use. (Illustration below) Please return all part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC7W must appear in the text of your TEC claim. TEC7W is valid from September 26, 2014, through October 10, 2014. The deadline for filing a claim under TEC7W is October 10, 2014. All parts must be returned to your facing RDC no later than October 24, 2014. Please re-order the same part numbers as needed.

NHTSA · 制造商通报10148048以原文(英语)显示 · 翻译待完成查看详情 →
通报轻微发动机NA

通报

"CPO(MINI NEXT)检测指南:需要提交 TSE PuMA 案例的发动机。保养记录中“发动机机油保养”存疑的车辆,在继续 CPO 检测流程之前,可能需要进一步评估并经 TSE 审核。"

NHTSA · 制造商通报10150045自动翻译 · 原文:英语查看详情 →
通报轻微发动机NA

通报

The customer complains of loss of performance and turbocharger noise. CAUSE The turbocharger oil supply may be restricted, causing oil starvation and resulting in the seizing of the turbocharger assembly.

NHTSA · 制造商通报10149578以原文(英语)显示 · 翻译待完成查看详情 →
通报轻微发动机NA

通报

Engine Oil Quick Reference CHART and Drain Plug Torque. INFORMATION All vehicles with the B38, B46, B48, B58, N20, N26, N47, N54 (E89 only), N55, N57, B57, N63, N63R, N63TU, N63M, S55, S63, S63M, S63R, S63T, N74, W20, XB1H, XB2H and XB4 engines.

NHTSA · 制造商通报10149565以原文(英语)显示 · 翻译待完成查看详情 →
通报轻微发动机NA

通报

Delivery Stop: 2013 3 Series Emissions Label Update. Vehicle Emissions Control Information (VECI) labels are now available for vehicles affected by the Delivery Stop. Refer to Service Information bulletin B71 01 13 for complete details.

NHTSA · 制造商通报10149496以原文(英语)显示 · 翻译待完成查看详情 →
通报轻微发动机NA

通报

(Update) Delivery Stop 2013 3 Series Emissions Label Update. We?re sorry that the attachment was not working in the first DCS. If it?s not attached to this one, then please reference the Deliver stop DCS sent on April 4th for the list of VIN?s and Dealer codes. The orders are not VIN specific or PMP orders. You can place them on your normal stock or VOR orders as required. Vehicle Emissions Control Information (VECI) labels are now available for vehicles affected by the Delivery Stop. Refer to Service Information bulletin B71 01 13 for complete details.

NHTSA · 制造商通报10149499以原文(英语)显示 · 翻译待完成查看详情 →
通报轻微发动机NA

通报

"MMINI Original Parts (New and Remanufactured): Limited Warranty Coverage Terms and Conditions. INFORMATION MINI USA, a division of BMW of North America, LLC (""MINI USA"") warrants eligible MINI Original Parts (New and Remanufactured) against defects in materials and workmanship for a period of 24 months without mileage limitation (Submit as a Warranty Claim Type 2 - new or Type 3 - exchange). Parts replaced under the MINI USA Limited Parts Warranty receives the remainder of the original 24 months without mileage limitation coverage, should subsequent failure(s) occur. The labor required to replace a part including diagnosis is also covered when the part's warranty repair is performed by an authorized MINI dealer. Part replacements under a new passenger car limited warranty or program are not eligible for parts warranty coverage. They are only eligible for the remaining portion of the new passenger car limited warranty or program coverage. DETERMINING A PART'S WARRANTY ELIGIBILITY MINI Original Parts A. Replacements under Warranty and Program Coverage, as applicable: * Are warranted for the remainder of the New Passenger Limited Warranty, the Federal, State or MINI Emissions Warranty or Program Coverage period (Submit as a Warranty Claim - Type 1). Prior to delivery: New parts must always be used to repair new vehicles in-stock (not entered into service, no in-service date). Do not use remanufactured parts. After delivery (vehicles in-service): Parts, components or assemblies must be replaced with remanufactured units, when applicable and available through MINI USA. B. Replacements under Field Authorized (FAS) Goodwill: * Receive the remainder of the New Passenger Car Limited Warranty, the Federal, State or MINI Emissions Warranty (Submit as a Warranty Claim - Type 1); or * 24 month parts warranty coverage without mileage limitation with customer's participation toward the cost of the previous goodwill repair (Submit as a Warranty Claim - Type 2 or 3). C. Replacem

NHTSA · 制造商通报10147964以原文(英语)显示 · 翻译待完成查看详情 →
通报轻微发动机NA

通报

"MINI Original Parts (New and Remanufactured): Limited Warranty Coverage Terms and Conditions. INFORMATION MINI USA, a division of BMW of North America, LLC (""MINI USA"") warrants eligible MINI Original Parts (New and Remanufactured) against defects in materials and workmanship for a period of 24 months without mileage limitation (Submit as a Warranty Claim Type 2 - new or Type 3 - exchange). Parts replaced under the MINI USA Limited Parts Warranty receives the remainder of the original 24 months without mileage limitation coverage, should subsequent failure(s) occur. The labor required to replace a part including diagnosis is also covered when the part's warranty repair is performed by an authorized MINI dealer. Part replacements under a new passenger car limited warranty or program are not eligible for parts warranty coverage. They are only eligible for the remaining portion of the new passenger car limited warranty or program coverage. DETERMINING A PART'S WARRANTY ELIGIBILITY MINI Original Parts A. Replacements under Warranty and Program Coverage, as applicable: * Are warranted for the remainder of the New Passenger Limited Warranty, the Federal, State or MINI Emissions Warranty or Program Coverage period (Submit as a Warranty Claim - Type 1). Prior to delivery: New parts must always be used to repair new vehicles in-stock (not entered into service, no in-service date). Do not use remanufactured parts. After delivery (vehicles in-service): Parts, components or assemblies must be replaced with remanufactured units, when applicable and available through MINI USA. B. Replacements under Field Authorized (FAS) Goodwill: * Receive the remainder of the New Passenger Car Limited Warranty, the Federal, State or MINI Emissions Warranty (Submit as a Warranty Claim - Type 1); or * 24 month parts warranty coverage without mileage limitation with customer's participation toward the cost of the previous goodwill repair (Submit as a Warranty Claim - Type 2 or 3). C. Replaceme

NHTSA · 制造商通报10147988以原文(英语)显示 · 翻译待完成查看详情 →
通报轻微发动机NA

通报

?SI B11 01 15December 2015 EngineTechnical Service This Service Information bulletin supersedes SI B11 01 15 dated October 2015. designates changes to this revision SUBJECT BMW Engine Oil Part Number Transition and Model Year 2016 Engine Oils. INFORMATION Part numbers of the recommended engine oils have changed. Use the quick reference chart in Section 1 to help identify which new engine oil part numbers should be used when the old part number stock is depleted. Use the quick reference chart in Section 2 to help identify which new engine oil viscosities and part numbers should be used in Model Year 2016 and newer vehicles.

NHTSA · 制造商通报10147859以原文(英语)显示 · 翻译待完成查看详情 →
通报轻微发动机NA

通报

Update 2: Availability of Fuel Pump 16 14 7 708 047. Due to limited availability, Fuel Pump Assembly 16 14 7 708 047 has been placed on hold pending arrival of additional inventory. At this time, inventory will only be released to dealers with motorcycles down in the workshop for repair. Until further notice, If you have a motorcycle in urgent need of this part please send an e-mail request to motorradaftersales@bmwna.com with the following information: Email Subject: 7708047 Request Dealer XXXXX

NHTSA · 制造商通报10147893以原文(英语)显示 · 翻译待完成查看详情 →
通报轻微发动机NA

通报

Due to previous programming errors, affected vehicles had the CBS oil service conversion performed as part of the N63 CCP campaign (SI B11 16 14), but the desired interval change to 12 months/15,000 km/10,000 miles was not completed correctly.

NHTSA · 制造商通报10147865以原文(英语)显示 · 翻译待完成查看详情 →
通报轻微发动机NA

通报

MINI Engine Oil Part Number Transition and Model Year 2016 Engine Oils. INFORMATION Part numbers of the recommended engine oils have changed. Use the quick reference chart in Section 1 to help identify which new engine oil part numbers should be used when the old part number stock is depleted. Use the quick reference chart in Section 2 to help identify which new engine oil viscosities and part numbers should be used in Model Year 2016 and newer vehicles.

NHTSA · 制造商通报10147905以原文(英语)显示 · 翻译待完成查看详情 →
通报轻微发动机NA

通报

BMW Motorrad is issuing this notification to the effect that the telescopic fork oil used to date, which has an SAE viscosity class of 7.5, has been changed to an oil with SAE viscosity class 11.5.

NHTSA · 制造商通报10147846以原文(英语)显示 · 翻译待完成查看详情 →
通报轻微发动机NA

通报

Engine Replacement: Filling Engine with Engine Oil Before First Start. If the new or remanufactured replacement engine is started to determine electronically if the engine is filled with the appropriate amount of engine oil, damage to the replacement engine can occur immediately. The engine may have some residual engine oil from assembly, but this is not enough engine oil to properly lubricate the engine to measure the engine oil level electronically when it is started for the first time. Further, the electronic engine oil measurement is only operational when the engine is running at its full operating temperature. Checking the engine oil without the engine running at operating temperature will lead to an incorrect or incomplete measurement.

NHTSA · 制造商通报10147126以原文(英语)显示 · 翻译待完成查看详情 →

来源:NHTSA(美国,公有领域)、加拿大交通部(加拿大开放政府许可)、DVSA(英国,开放政府许可 v3.0)、RappelConso 与欧盟 Safety Gate(法国,开放许可 2.0)、日本国土交通省(公共数据许可1.0)、韩国国土交通部(car.go.kr)。