The passenger side supplemental restraint system (air bag) may have a cracked inflator body. If the vehicle is involved in a deployment level crash, the passenger side air bag may not inflate properly which could result in reduced occupant protection. In addition, the igniter plug could separate from the inflator, which could result in the release of hot gases and could ignite flammable material or potentially cause personal injury. Correction: Vehicles will be inspected and a new passenger side air bag module will be installed if necessary.
The rail of the motorized seat belt track assembly may wear sufficiently under certain conditions to cause the cable which pushes and pulls the moveable buckle assembly to jam in the track, causing the seat belt track assembly to be inoperative. Correction: Driver side motorized shoulder belt tracks will be replaced with increased durability tracks. Passenger side belt tracks will be inspected and/or replaced as necessary.
Note: Driver's side (left) passive seat belt assembly. The rail of the automatic shoulder belt can wear sufficiently such that the cable which retracts the buckle assembly will become jammed in the rail rendering the shoulder belt inoperative.
Note: Passenger side (right) seat belt assembly. The rail of the automatic shoulder belt can wear sufficiently such that the cable which retracts the buckle assembly will become jammed in the rail rendering the shoulder belt inoperative.
These vehicles do not comply with c.M.V.S.S. 210.1 tether anchorages for child restraints. The english tether bolt and metric anchor nut combination is not compatible with the standard. Also, information concerning the installation of the bolt contained in the owner guide is incorrect. Correction: New child restraint anchor bolt kits will be mailed to owners along with two revised stick-on owner guide pages. Also, dealers will replace incorrect panel weld nut if required.
If the passenger-side air bag deploys in an accident and there is no passenger in that seating position, the air bag can detach from, and deform, the mounting bracket.
The brackets to which the automatic shoulder belt retractor assembly is mounted under the centre console may have understrength spot welds that might reduce the effectiveness of the shoulder belt in the event of a vehicle collision. Correction: Dealers will install two bolts to secure the brackets on affected vehicles.
The supplementary air bag inflatable restraint caution label located on the driver side sun visor does not contain the statement, "do not install rearward facing child seats in any front passenger seat position." this does not comply with the requirements of fmvss no. 208, "occupant crash protection."