This engineering information (EI Lite) asks the technicians that if you encounter a vehicle where customers comment on having oil leaking from the oil pan that drives a warrantable item type of repair on said vehicles, use the Field Product Reporting (FPR) App process.
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to oil leaking from the oil pan.
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to vehicles being towed in due to loss of drive.
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to vehicles being towed in due to loss of drive.
This engineering Information (EI) ends the need for information from the field for a condition of oil leaking from the valve rocker arm oil control valve. If a vehicle is encountered with this condition, refer to SI for further diagnosis.
This engineering informational bulletin is requesting information from the field on warranty parts for complete canister assemblies that apply to the DTC codes specified and has leak conditions. Engineering is determining a root cause and developing a Field Fix.
This technical bulletin provides a procedure to replace the rear diff assembly if the oil has leaked into the torque tube causing the rear diff to fail.
This engineering informational bulletin is requesting information from the field on vehicles that have the condition of Oil Leak Between Upper and Lower Oil Pan.
This engineering informational bulletin is ending the need for information from the field on vehicles that have the condition of Oil Leak Between Upper and Lower Oil Pan.
15532 - Service Update. This bulletin provides a service procedure to correct a potential oil leak on certain 2015 model year Buick Enclave, Chevrolet Traverse and GMC Acadia vehicles equipped with a HFV6 engine (RPO LLT). The potential leak is from the oil pan crank case at an engine mount hole location, which is not under engine oil system pressure. To correct this condition, dealers will remove the mounting bolt, clean the bolt and hole, apply thread sealant and reinstall the bolt.
Service Update. Certain vehicles listed above may have contamination inside the high-pressure fuel pump spill valve assembly. Dealers will replace the high pressure fuel pump.
Service Update. Certain vehicles listed above may have a condition in which a quality issue with the engine was identified. Dealers will replace the engine.