Complaint Customer states check engine light ON and potentially reduced power output. The following DTC's may be current and/or stored in the ME control unit (N3/10): P210185 The throttle valve actuator has a malfunction. There is a signal above the permissible limit value. P213500 The values from the position sensors of the throttle valve are implausible relative to each other P213600 The values from position sensors "A/C" of the throttle valve are implausible relative to each other P210B85 The throttle valve actuator 2 has a malfunction. There is a signal above the permissible limit value. P2AD300 The values from the position sensors "A/G" of the throttle valve are implausible relative to each other P2AD200 The values from position sensors "B/G" of the throttle valve are implausible relative to each other. NOTE: The faults may also be present in the ME control unit "faults without status filter" Cause Increased electrical resistance between the pins for left and right throttle actuators (M16/60 and M16/61) and the sockets on the engine wiring harness connector. Remedy Replace the sockets in the engine wiring harness connector at both the left and right throttle actuator with the following parts: Silver Plated Sockets 8x A 003 982 70 26 (according to wiring diagram 0.5 mm) 4x A 003 982 73 26 (according to wiring diagram 0.75 mm) ELA Seals 12x A 001 545 50 80
NANHTSA · 制造商通报11039063
技术服务通报
以原文(英语)显示 · 翻译待完成
涉及: Mercedes-Benz S-Class VII (W223) (车型年份 2021)
来源:NHTSA(美国,公有领域)、加拿大交通部(加拿大开放政府许可)、DVSA(英国,开放政府许可 v3.0)、RappelConso 与欧盟 Safety Gate(法国,开放许可 2.0)、日本国土交通省(公共数据许可1.0)、韩国国土交通部(car.go.kr)。